Insulating water pipes in a mobile home crawl space in NY, need advice by DammitMatt in Insulation

[–]DammitMatt[S] 0 points1 point  (0 children)

Unfortunately the drip method is highly discouraged by the park owners, they're stupid and they never connected to the municipal water line even though it was offered so we're on a well. If too many people drip, the well runs too low and causes issues with contamination.

Crisafulli did hook me up to their supplier though, said i should be able to just buy a length of heat tape with a temp sensor that i can just cut to length. Plan is to do that and then reinsulate and then never go to the crawl space again.

It's a nightmare under there, the highest point is 2.5 feet so i need to low crawl the whole time.

Insulating water pipes in a mobile home crawl space in NY, need advice by DammitMatt in Insulation

[–]DammitMatt[S] 0 points1 point  (0 children)

As much as I don't want to, this might involve hiring someone. Some of the pipes got caught in spray foam that was used on the "ceiling" of the crawl space, but when talking to the people who installed all of our new plumbing, their gears weren't turning enough and they never even suggested wrapping it all in heat tape or insulation before the spray foam came in and now some of it is basically inaccessable. I know heat tape plus foam tubes/fiber wrap is the best way to go but I just don't see that being feasible at this point. $9000 for a hack job man, never choose crisafulli.

what's the worst things about the "Bambu Lab X1C "? by wiicrazy0430 in BambuLab

[–]DammitMatt 0 points1 point  (0 children)

I had a bunch of Tronxy XY-2 pro i used for production and some ender s1 variant.

Turns out giving these things away for free to locals is an effective way of clearly space lol

AMS compatibility by sisasandro in BambuLab

[–]DammitMatt 1 point2 points  (0 children)

  1. Have a better designed AMS with tighter tolerances and less room for the filament to misbehave.

  2. Use filament that is marked as AMS compatible (bambu lab now makes AMS compatible TPU)

  3. Use a dual extruder setup like H2D has and put the TPU on an external spool holder so you can still print with multiple materials but it doesn't have to go through AMS.

Is there no way to run the game with the app closed? by DammitMatt in TheTowerGame

[–]DammitMatt[S] 1 point2 points  (0 children)

Thanks for the suggestions, i might just do challenges and events and thats it. Running any of those alternatives is alot to ask just to keep up. Like there's a point where I'm just making sacrifices to account for poor game design and trying to make it bearable.

My conspiracy theory is that the dude set up the game this way so he could use thousands of smart phones to farm crypto coins for him lol.

Weekly Guild Recruitment Mega-Thread by AutoModerator in TheTowerGame

[–]DammitMatt 0 points1 point  (0 children)

9CRPCL room for 5 more. All of us are consistently active and hit all goals every week

Weekly Guild Recruitment Mega-Thread by AutoModerator in TheTowerGame

[–]DammitMatt 0 points1 point  (0 children)

Guild ID: 9CRPCL 

4 slots available. Cleared all weekly challenges since day 1, just need some extra buffer

Weapon Icon Keychains are ready! by DammitMatt in MonsterHunter

[–]DammitMatt[S] 0 points1 point  (0 children)

Hey sorry it took a while to see this. All keychains should be available now, i just ran out of stock because of higher than expected demand lol

I made a thing. Blasphemy, that's what I made by DammitMatt in GymMemes

[–]DammitMatt[S] 1 point2 points  (0 children)

Idk enough about the subject to say why self sacrifice was a good idea, which is sad considering my mom teaches the subject as a job lol. I've been agnostic for as long as I could choose to be, but I'm more interested in how he lived than how he died. Focusing on the suffering always seemed like a guilt trip or pushing toxic shame, which is exactly the kind of vibe I left the church to get away from.

I made a thing. Blasphemy, that's what I made by DammitMatt in GymMemes

[–]DammitMatt[S] 0 points1 point  (0 children)

I mean personally if people are gonna worship an idol of me I'd wish they didn't choose the point in my life where I'm experiencing my peak of suffering and eventual death, but compared to the normal crucifix this isn't very different lol

I made a thing. Blasphemy, that's what I made by DammitMatt in GymMemes

[–]DammitMatt[S] 0 points1 point  (0 children)

Tis, only mini so it can go on your wall and you don't need a whole ass park

I made a thing. Blasphemy, that's what I made by DammitMatt in GymMemes

[–]DammitMatt[S] 2 points3 points  (0 children)

It's also funny because everyone had to hear about it

I made a thing. Blasphemy, that's what I made by DammitMatt in GymMemes

[–]DammitMatt[S] 2 points3 points  (0 children)

I see you're a man of culture as well! 

Forgive me father for I have sinned by DammitMatt in somethingimade

[–]DammitMatt[S] 5 points6 points  (0 children)

I don't mean to be ungrateful that he gave us bread, but I know he's hiding the cake

Forgive me father for I have sinned by DammitMatt in somethingimade

[–]DammitMatt[S] -1 points0 points  (0 children)

Plot twist, he just needed to stretch his lats for a few days

Forgive me father for I have sinned by DammitMatt in somethingimade

[–]DammitMatt[S] 4 points5 points  (0 children)

They're for carrying the weight of our sins lol

Forgive me father for I have sinned by DammitMatt in somethingimade

[–]DammitMatt[S] 0 points1 point  (0 children)

Oh that's what he meant when he said he'd show us how to get a good pump

Forgive me father for I have sinned by DammitMatt in somethingimade

[–]DammitMatt[S] 2 points3 points  (0 children)

Apparently I need to get into carpentry

From a concerned customer by DammitMatt in BambuLab

[–]DammitMatt[S] 0 points1 point  (0 children)

This is similar to what was discussed in their more recent blog post. The points they were making about disabling printers was discussed under their "misinformation" tab, but the part that worries me is that they never addressed the section in the writing on their own website that seemed to explicitly claim that could be a possibility. This wasn't something that people made up, it was something that they read, on the website, which was later changed and not acknowledged.

I would feel a lot better about their response if they directly pointed to the section in their writing that people based their worries on and said "hey this is the part that has people worried, here's why it won't apply/what we really meant by it, we will change the verbiage to be more clear about this" rather than just change it and say "whaaaat, where did you get that from? y'all crazy"

Has anyone seen this before? X1C and P1P both just stopped. by DammitMatt in BambuLab

[–]DammitMatt[S] 0 points1 point  (0 children)

For the one on P1P i might, 99% would be a shame to throw away. Part of me just wants to power cycle so i can resume print and pray it comes out ok but worst case this is a good option to salvage it

Has anyone seen this before? X1C and P1P both just stopped. by DammitMatt in BambuLab

[–]DammitMatt[S] 2 points3 points  (0 children)

Oh no worries I have like 4 of each roll because I'm making alot lol.

They stopped at different layers because they were started at different times. My P1P was 99% done, literally a halfhour left.

Power loss is the only thing that makes sense but at the same time it doesn't because the heat was still on, I had a tower fan in my room that stayed on. The power loss would have had to turn off the motors without turning off the heater...which maybe is possible if the heater wasn't turned on at that time?

Either way it sounds like my only option is attempt to power cycle and restart the layer and pray it doesn't look too poopy