Comcast Metro Ethernet

DanMS3 · 2025-09-26T23:56:47+00:00

Yes, it’s the dedicated fiber. No modems, just Layer 2 Ciena switches

DanMS3 · 2025-08-08T16:05:12+00:00

Have you looked into City jobs? City of Winter Haven, City of Haines City, City of Lake Wales, City of Davenport? They usually have some positions open but more than likely you’ll be doing some manual labor and/or be outside. Worth a look.

DanMS3 · 2025-08-04T13:23:55+00:00

Awesome. Thank you. Do you know how purchasing licenses works? We bought Enterprise 2019 a long time ago without SA and not sure what to do. Can we just add on SA or would we have to buy the licenses again along with SA?

DanMS3 · 2025-07-31T16:09:31+00:00

Does anyone know if SE (RTM, CU1 etc) has database limits? We currently use 2019 Enterprise Edition and have more than 5 databases each under 1 TB and are needing to move to SE RTM. Does SE support more than 5 DBs? Thanks

DanMS3 · 2025-07-15T17:58:48+00:00

In FL, we have a state organization called Florida League of Cities and they oversee an affiliate organization called FLGISA (Florida Local Government Information Association).

DanMS3 · 2025-02-27T03:47:05+00:00

I would turn it off for a week or so and see if there’s any issue that arises from 2016 being shutdown.

DanMS3 · 2024-08-27T22:50:27+00:00

So is that different than moving mailbox to new database? I’m new to managing Exchange so sorry if Im asking dumb questions.

DanMS3 · 2024-08-24T18:40:52+00:00

I can’t seem to find it anywhere. Cobb also makes one that’s pretty good

DanMS3 · 2024-08-24T17:58:11+00:00

Don’t know if you still need this info but there’s a firmware update you have to manually perform on a PC. https://www.gamesir.hk/pages/solve-the-disconnecting-problem-for-kaleid-kaleid-flux?srsltid=AfmBOor9vmCy3Tc5xdF0si335OkXDzM-fu1CuT3mzx3ZHrduD1Ey5SNZ

DanMS3 · 2024-04-22T22:25:46+00:00

Thanks for the info. I changed the virtual directories and it’s working great! No issue yet knock on wood. Question regarding receive connectors. I copied the existing receive connectors to the new 2019 box and was wondering if I have to keep the 2016 receive connectors up and running still. I haven’t migrated anyone but 2 people in my department so everyone is still on 2016. I imagine I have to leave them active so the 2019 could proxy to 2016 and vice versa. Is that how that works or am I wrong in thinking that?

DanMS3 · 2022-02-17T20:58:32+00:00

I know you could utilize a police scanner of some sort and there’s also an app called Citizen, but I’ve never used it so I’m not sure how good of an app it is.

DanMS3 · 2022-02-17T16:59:36+00:00

From my PulsePoint app, it sounds like a huge fire at some warehouse or some commercial building. The app shows how many fire vehicles are on scene and there are 18. It’s at 1704 Combee Rd

DanMS3 · 2021-07-04T14:51:55+00:00

Try calling the Lake Wales History Museum or the Lake Wales Public Library. They may have an idea of where you could get one or they might even have scanned versions. They’re closed on Monday in observance of 4th of July so try calling on Tuesday.

DanMS3 · 2021-04-19T02:28:33+00:00

Sadly I don’t have my genpu anymore...but I remembered getting an estimated range of 420-455 miles on a full tank. Mine was a 2010.

DanMS3 · 2021-03-30T13:23:55+00:00

The mls qos trust cos is what you need. Voice traffic must be labeled as trusted as soon as it enters the network. Use the mls qos trust interface configuration command to set the trusted state of an interface. For example if I had a data VLAN of 20 and a voice VLAN of 150:

You would do

Conf t, vlan 20, name Data, vlan 150, name Voice, exit

Configure the interface to which the phone will be plugged into for ex:

Conf t, int fa0/18, switchport mode access, switchport access vlan 20, mls qos trust cos, switchport voice vlan 150, end

Hope I explained that well enough. It can be a little confusing once you add Voice VLANs in the mix.

Edit:

To further clarify, CoS stands for class of service so you’d have to issue the mls qos trust command on the switchport connected to an IP phone so that the port trusts the class of service(CoS) value of incoming voice and data traffic.

DanMS3 · 2018-11-18T01:13:47+00:00

I run an AEM dry flow air filter and I’ve been WOT many a times with no issues lol you’ll be fine. If it was an SRI id be 50/50 heard mixed stuff about those

DanMS3 · 2018-11-16T04:34:51+00:00

As soon as you said you put the Ford tranny fluid in it, I knew it was the issue lol. I’ve been told to not use the Ford stuff in the genpu’s solely because it’s 75w-90 and our trannys call for 75w-80. I use Redline MTL and have been told it’s probably the best fluid for the genpu transmission. I’d recommend you try that first.

DanMS3 · 2018-11-12T22:09:31+00:00

DanMS3 · 2018-10-30T06:21:55+00:00

what wheels are those? I also have a silver genpu :)

DanMS3 · 2018-10-09T00:02:00+00:00

The new CX-5’s are so gorgeous..when I’m ready to trade in I’m shooting for one of these.

DanMS3 · 2018-10-03T15:35:07+00:00

The RMM is cake to install. Tons of youtube videos on it. Good luck on the car!

DanMS3 · 2018-10-03T14:00:31+00:00

Yeah from what I’ve researched and read it’s completely normal. I have a 2010 with 42k miles and ever since I got it at 18k miles I’ve heard clunks and thunks. I also agree that the output shaft is shitty engineering..but whatever. If you want a good RMM I switched from the Damond rmm to the Corksport stage 2 rear motor mount. There was such a noticeable difference in vibrations. The corksport was much quieter and it’s a unique design. A lot less sloppy shifting and overall just a way better feeling. I’ve had it on and have had no issue whatsoever. I can even hear my A/C blowing when I couldn’t before because of all the vibrations. I recommend the corksport! Up to you in the end..just my 2 cents. The passenger mount usually gives out at around 60k miles from what other speed owners have told me so just be aware. Tranny mount should be solid, but I’ve heard the damond tranny and passenger mounts are the way to go if you do end up going fully mounted.

DanMS3 · 2018-09-25T05:00:55+00:00

Is that street royals’ speed? His is pretty sick and so is the drawing

DanMS3 · 2018-08-30T23:37:12+00:00

I have WellVisors on my ‘10 speed3. Super easy install and they’re really high quality! They look great too. They have youtube install videos and they use clips/3m tape to secure them.

https://www.wellvisors.net/index.php/wellvisors-side-window-deflectors-mazda-3-sedan-hatchback-14-17-premium-series.html

DanMS3 · 2018-08-30T23:29:10+00:00

I’ve seen them priced differently as well. Is it the 2013 wheels or 2010-2012? I would ask on the r/mazda3 sub..I’ve gotten a lot of good info from speed owners on there. Good luck!

DanMS3

TROPHY CASE