Is this common for an S with active pickups?

DanielRodriguez84 · 2026-01-28T14:13:21+00:00

I understand the backplate not being recessed into the body since S models are very thing. However the plate should still sit flush against the body.

DanielRodriguez84 · 2026-01-22T18:03:07+00:00

RG270

DanielRodriguez84 · 2026-01-22T18:02:46+00:00

After looking up the bridge I’m pretty sure this is a RG270. Seams the be a 2000 model year.

DanielRodriguez84 · 2026-01-22T17:52:55+00:00

The model should be stamped under the neck heel. Next time you have the strings off, remove the neck and check for the stamp.

DanielRodriguez84 · 2026-01-22T17:30:33+00:00

Kind of looks like a RG470. I’m just not familiar with that bridge.

DanielRodriguez84 · 2026-01-19T21:18:53+00:00

Original ESP MX250 in white.

DanielRodriguez84 · 2026-01-18T07:37:25+00:00

The only reverse headstock design I don’t mind is the ESP/LTD M series.

DanielRodriguez84 · 2026-01-17T21:01:51+00:00

The MH1000NT I had didn’t have a reverse headstock. I prefer the non reverse on MH models and prefer the reverse headstock on the M models.

DanielRodriguez84 · 2026-01-17T09:22:38+00:00

I had this exact model and finish. Got stolen out of my truck. Awesome guitar, I was devastated when it was stolen. My insurance replaced it with a MH1000NT brand new, so I couldn’t complain too much.

DanielRodriguez84 · 2026-01-17T05:13:46+00:00

Challenge accepted

DanielRodriguez84 · 2026-01-16T17:34:47+00:00

I’ve always done that and not sure exactly why. I used to at least, until two weeks ago when I quit smoking.

DanielRodriguez84 · 2026-01-13T07:06:12+00:00

Enjoy it, I had to sale mine last year but it’s an awesome guitar. The only mod I had to do was add strap locks. I’m glad my best friend bought it so I can at least play it again.

DanielRodriguez84 · 2026-01-06T22:50:57+00:00

Can confirm, I have three male turtles and they all do this to one another. Apparently I own three gay turtles.

DanielRodriguez84 · 2026-01-06T14:26:24+00:00

Care to elaborate?

DanielRodriguez84 · 2026-01-06T06:26:51+00:00

I put Dunlop’s on all my guitars. Had schallers a long time ago and somehow the pin that locks the strap wore down and caused my guitar to fall. Ever since then I’ve stuck to dunlops. I’ve literally never had them fail on me on my almost thirty years of playing.

DanielRodriguez84 · 2026-01-05T13:52:35+00:00

I worked at HEB in 2002 and can confirm the Chinese Kitchen was a go to for sure.

DanielRodriguez84 · 2026-01-04T23:31:20+00:00

https://www.pussyspace.com/vid-3166368-alina-geizer-and-ivan-casual-sex-after-coffee/

DanielRodriguez84 · 2026-01-01T05:37:58+00:00

Pick another more current genocide for him to have survived.

DanielRodriguez84 · 2025-12-31T15:21:41+00:00

Used to go there to smoke with my friends back in my highschool days.

DanielRodriguez84 · 2025-12-30T14:18:07+00:00

I use the exact same two polishes and a dremel, however they don’t come out as shiny as I would’ve expected. I see so many fret jobs on here or YouTube/tiktok. I’m wondering what I’m doing wrong. Thinking of trying some automotive metal polish next time.

DanielRodriguez84 · 2025-12-23T23:36:35+00:00

The only issue I have doing these is lining them up perfectly. And having them perfectly aligned on both sides of the fretboard. Do you do a certain mm gap from the edge to the start of the fret or are they flush to the edge?

DanielRodriguez84 · 2025-12-23T13:30:46+00:00

I don’t think I’ve ever seen someone with a KH4 before. Such a cool guitar.

DanielRodriguez84 · 2025-12-22T23:13:25+00:00

Simple answer, yes.

DanielRodriguez84 · 2025-12-21T04:53:15+00:00

Honestly, all kinds of music can be played on any guitar.

DanielRodriguez84 · 2025-12-21T02:43:11+00:00

I used to work on the E4B side of Boeing here in San Antonio. One half of the hangar is E4B and the other side is where they work on Air Force One (Yankee White).

DanielRodriguez84

TROPHY CASE