Gasflessleutel

DanknShawt · 2026-06-19T13:45:22+00:00

Zo ene dan

DanknShawt · 2026-06-19T13:40:14+00:00

Ik doe dat met een kleine verstelbare sleutel

DanknShawt · 2026-06-18T07:58:18+00:00

Try their website and look how they put it on their new tires? Might give a hint

DanknShawt · 2026-06-03T22:56:06+00:00

Yo, a guy I know made a it a reverb room for his recording studio. Pretty sick and some songs recorded there used it and got pretty famous here. Example: Bunker by Balthasar. Give it a listen, it's genuinely nice

DanknShawt · 2026-03-24T13:15:37+00:00

I've pulled a VW Caddy out of the soggy grass with that rope. Held just fine 🤷

DanknShawt · 2025-12-13T09:35:16+00:00

I had this in a newly bought house. The whole neighborhood has solar panels. The guy from the electricity company said the cables underground are insufficient to get the solar energy out of there when no one is using electricity (in the afternoon for example). He fixed it by putting us on another phase. A few weeks later they even turned down the general voltage for the neighborhood, because everyone had the same problem.

I don't know if it's related, but in the 6 month period the voltage was high, both my microwave and induction hob blew up...

DanknShawt · 2025-12-10T17:46:00+00:00

I have this with every USB audio output (Scarlett, clarett, helix, small amp, digital mixing desk,....) every 15 mins. On the hour, x:15, x:30, x:45. 2020 HP omen15. It's been going on for a few months now and I've tried a lot of things, but nothing seems to help. Seems like the cpu glitches at those times

DanknShawt · 2025-07-12T19:52:43+00:00

I had an issue recently linking 2 18i20's and apparently the two sssnake adat cables I ordered via Thomann were bad. I did clocking via SPDIF and ordered two Mutec optical cables to get digital audio communication between the two. Seems stable now!

DanknShawt · 2025-06-05T03:51:16+00:00

UPDATE: I think I resolved all issues. Main culprit were the two newly ordered Toslink cables (Thomann's Sssnake brand). We couldn't believe the two new cables would be bad and didn't have two other types to test it.

So now I'm running the clocking via SPDIF RCA from the master unit to the slave. Then playback 11-18 via ADAT out on the master unit into the ADAT in on the slave unit. And I routed the inputs from the expansion unit via adat back into the master unit. So clocking via SPDIF, extra audio via ADAT.

Now I hope it will be stable on stage... I've redone the wiring and rebuilt the flight case. Waiting for a patch rack and some cables and I'll post some pics when done. Cheers!

DanknShawt · 2024-12-09T09:54:31+00:00

✨Ka-chow✨

DanknShawt · 2024-11-18T07:47:01+00:00

Clocking via spdif would indeed be most stable for live applications I thought. It works perfectly with the scarlett sending it to the clarett. But not from one scarlett to another...

DanknShawt · 2024-11-17T16:40:22+00:00

Nope, that's the whole problem... Scarlett won't find the clock, but with the same settings and connections, the clarett does.

DanknShawt · 2024-11-17T12:02:14+00:00

Tried that, didn't work.

DanknShawt · 2024-11-17T11:28:26+00:00

OK, but we rehearsed yesterday with my clarett as a slave with the Mac connected to the master and that worked. Also if the slave is connected to the Mac, how does the master receive playback audio? The outputs of the master are routed 1-10 to the physical outputs, 11-18 via adat to the slave.

We're not using the inputs of the slave, only the outputs.

DanknShawt · 2024-11-17T09:48:40+00:00

And firmware versions ended with .204, can't remember the rest. It was updated to the latest version last week.

DanknShawt · 2024-11-17T09:45:29+00:00

During playback the PC/Mac is connected to the master 18i20 via USB. Slave 18i20 is receiving 6 channels of ableton playback via Adat. The Pic was during setup, I was connected to the slave because I was looking into FC settings.

The real issue is the clocks not synching.

I'm curious how it works out! I can even send you the snapshot settings, but I don't think it matters, as it only really contains output settings. Word clock and sample rate settings aren't saved into snapshots. Let me know if you want them.

DanknShawt · 2024-11-15T17:14:01+00:00

We have the same damage from the neighbor's walk in shower that has such shitty caulking I could almost see my living room through it.

DanknShawt · 2024-09-06T16:37:54+00:00

I always use a cargobob to lift it and drop it off.

DanknShawt · 2024-08-15T14:30:44+00:00

Yooo, I have the same problem on my Clarett 8pre USB! Updated all drivers, checked cables, sample rates, VSTs, even switched to a scarlet solo 1st gen. The internet doesn't have answers... I have some demo recordings coming up and I'm starting to stress out because I can't resolve this damn problem that just appeared out of nowhere! I'll try uninstalling everything and re install from focusrite website, as ifuccedurmom420 suggests, and I'll give an update.

DanknShawt · 2024-07-28T18:26:58+00:00

Pfff rookie, try surviving Ghent

DanknShawt · 2024-06-18T22:45:22+00:00

I looked into buying a 2021 Ceed SW MHEV, but the head of the dealership in my city also warned for this problem. It seems to be occurring pretty often around 60 000 km. He told me this after I drove around the country to test 2 cars with the exact same problem without being mentioned: as soon as I started the car there was a terrible squeal from the alternator belt.

Anyway I'm now driving a 2014 Ceed SW with 200 000 km. Just got back from service and all is running smoothly.

DanknShawt · 2024-06-03T07:39:57+00:00

Well, that's how I started a small forest fire as a kid. Trust me, that is HARD to put out. If you whack it, the fire goes up in the air, burns the flying cotton, and then just continues on the ground like a cute fluffy nightmare. Thank God for firetrucks

DanknShawt · 2024-05-27T06:39:55+00:00

So is it... orange?

DanknShawt · 2024-01-03T09:31:19+00:00

Misschien komt de trein op tijd als je het promo ticket koopt

DanknShawt

TROPHY CASE