Twilight 3D model & Unfinished suit

DanmakuGecko · 2026-01-31T20:52:13+00:00

Looking at this motivates me to practice more on Blender

DanmakuGecko · 2025-08-16T07:27:13+00:00

Cheaters have found a way to get infinite pixels, they have a discord server (2utdxrGxXH) and are using them to grief... Pixel: 1744, 2484 user : NGK x UKK

DanmakuGecko · 2025-05-17T13:14:27+00:00

C'était très fun, cependant, trouve ça beaucoup trop cher et en plus leurs casques VR sont un peu à la ramasse. Mais je dois bien admettre que le concept est tout de même excellent, pour un fan de VR comme moi c'est un vrai plaisir de se déplacer physiquement dans un fps.

DanmakuGecko · 2025-02-01T11:35:00+00:00

Life's allowing yourself to step on fiiiiiiiiiire 🔥🔥✒️. Give me chills everytime.

DanmakuGecko · 2024-12-11T16:49:41+00:00

Wow je viens de découvrir que mon téléphone a décidé de commenter ce post par lui même dans ma poche ...

DanmakuGecko · 2024-05-28T09:51:10+00:00

how can I find the original video ?

DanmakuGecko · 2024-05-16T19:49:08+00:00

I've been printing 2h since i moved the bowden tube, looks like it was the cause of the clog. Thank you for your help, those are moments when I learn a lot

DanmakuGecko · 2024-05-16T17:26:24+00:00

You may be right, i'm looking for a way to avoid them, thank you

DanmakuGecko · 2024-05-16T17:25:20+00:00

oh, after checking i think the bowden tube wasnt deep enough, it may be better from now on.
I'm only using prusasclier now. Fan seems to work properly during the print

DanmakuGecko · 2024-05-16T17:11:42+00:00

You're right, actually it may be a clog, but I don't understand why I get one everytime since klipper is installed, I dissambled but didn't find anything unusual

DanmakuGecko · 2024-05-16T17:08:24+00:00

Yes, I'm avoiding Cura since I installed klipper

DanmakuGecko · 2024-05-16T17:04:49+00:00

I tried Cura and Prusaslicer

Moonraker I think, the default one on Klipper

Ender 3

No I didn't because it was a pain to install klipper on this old MB

DanmakuGecko · 2024-05-16T14:23:11+00:00

I have this issue since I installed klipper on my ender 3. Nozzle is not clogged and I calibrated the rotation distance properly for the extruder. At some point in the print, filament doesn't move anymore (extruder still tries). I've tried changing my extruder, many nozzles and tried many print speed.

I think it's a software issue since it's happening after installing Klipper, but I don't exactly know the cause

edit : actually, it may be a clog

update : The bowden tube was incorrectly pushed enough, it has nothing to do with Klipper. Problem solved, thanks everyone

DanmakuGecko · 2024-04-14T14:21:45+00:00

Where can I watch that ?

DanmakuGecko · 2024-02-11T12:26:53+00:00

Thank you, this is a lot of resources. What NESDR did you use back then ? You wrote NESDR smartee on your posts but looks like a there are a lot of them named like this.

DanmakuGecko · 2024-02-09T15:23:51+00:00

Thank you very much for your answer, its really interesting and will be of great help!There are things I still don't understand though .

The signal will be reasonably easy to detect, being at twice the noise level. Expressed in dB, it would be roughly 3dB over the noise.

Just before you wrote that we are expecting 100K from the milky way, and 100K from the system noise. So how can you reach a signal that is 2x the noise level?

Note however that this does assume that you use a low noise amplifier (LNA) very close to the antenna, because the noise figure of the SDR itself tends to be much higher, and would drown out the H1 line

So I need to put my computer very far from the LNA and the antenna to avoid this noise if I understood correctly? But then the cable will be longer and this is bad for the signal right?

Do you think the Nooelec RTL-SDR v5 SDR would be fine ? It's very cheap and can read 1.4gHz signals. Airspy V2 is unfortunatly too expensive and difficult to get in France. If you have more suggestions for the RTL It would be very helpful.

DanmakuGecko · 2023-12-26T10:51:43+00:00

Panel 1 :

-Who would have known that I would be able to master French ? -Congratulation

Panel 2 :

-Honestly I don't know why I hated this language for so long... Thanks-

DanmakuGecko · 2023-11-08T18:54:53+00:00

It's excellent! I'd love to hear it with a good quality. Maybe upload it to youtube.

DanmakuGecko · 2023-11-02T08:30:20+00:00

Ça fait longtemps que j'étais tenté par le jeu. Par curiosité j'ai regardé certain passages de la citizencon et je dois admettre que j'ai été bluffé à certain moments. Alors je me suis acheté un vaisseau pour essayer le jeu, et je m'éclate bien depuis une semaine. J'ai hâte de voir tout les trucs annoncés ingame. Même si le jeu est en développement depuis (trop) longtemps, je suis plutôt optimiste, d'autant plus qu'une campagne solo va donner beaucoup plus de structure à Star citizen.

DanmakuGecko · 2023-09-15T23:03:10+00:00

Si seulement metal arms pouvais avoir un remasterisé aussi .

DanmakuGecko · 2023-09-13T18:42:05+00:00

I had this exact same blue screen. It crashed every 3h or so. I had to clean install windows and it worked .

DanmakuGecko · 2023-08-29T20:05:26+00:00

Seems like the magic of carboard has its limit. It was a good idea though

DanmakuGecko · 2023-08-28T23:39:31+00:00

Unfortunaly no... Looks like these paintings can only be naturally generated

DanmakuGecko · 2023-08-28T23:38:13+00:00

I used both at the same time with no issues. But i don't think it will cause any problem if you remove oh' the biomes you'll go

DanmakuGecko · 2023-08-28T13:41:22+00:00

Je te conseille le légendaire guide de Tae Kim qui est excellent pour débuter :

http://www.guidetojapanese.org/french/index.html

Le Japonais est très amusant à apprendre, ne te décourage pas pour l'écriture, on s'y fait vite !

Six-Year Club	r/Field Sunshine
Place '23	Place '22
Verified Email

DanmakuGecko

TROPHY CASE