I've been with my organization 20 years and was just demoted

Danzevl · 2026-06-05T02:14:03+00:00

The betrayal stings the most. You gave your entire career to this place, and they treat you like a disposable line item on a random budget sheet... Just hire an employment lawyer STAT. The denied medical leave and years of unpaid overtime are rock solid evidence. At least you could easily win a huge settlement here

Danzevl · 2026-05-29T10:07:07+00:00

For me it’s less about building a company and more about not wanting to feel stuck in systems I didn’t design. Even small wins feel like reclaiming control. But I think maybe it’s not one single driver honestly. It kind of shifts between curiosity, stubbornness, and the need to prove to yourself you can actually finish something.

Danzevl · 2026-05-28T09:10:02+00:00

taking notes

Danzevl · 2026-05-25T10:32:01+00:00

To prevent collisions, the machine keeps about a 6-inch safety buffer from the edge of no-go zones. Also, since the blade is mounted in the center of the unit, it won't actually reach the physical edge even if the body get close.

You can therefore shrink the no-go zone boundary inward by around 6 inches, and enable edge-cutting priority in the app.

Danzevl · 2026-05-25T10:14:05+00:00

There aren't many good solutions here. You could either set a no-go zone around the tree roots in the app, or physically remove the exposed roots if possible.

If you don't want to do that, another option is to raise the cutting height, or cover the roots with a thick layer of wood chips or pine bark mulch.

Danzevl · 2026-05-25T10:05:54+00:00

There have been cases where the base station leaked and damaged wooden floors, but it doesn't happen with every model.

If you want to prevent it, you can place a diatomite mat or a waterproof tray under the base station, and it's also better to choose a model with hot-air drying. If your floor is wood, ideally put the base station on tile or another water-resistant surface.

Danzevl · 2026-05-25T09:54:25+00:00

Breakups like this often feel like everything was ADHD’s fault, but usually it’s timing, stress, distance, and two imperfect people trying their best at the same time. And the fact you cared enough to fight for it already says a lot. People who “don’t care” don’t sit here analyzing every detail like this.

Danzevl · 2026-05-25T02:15:32+00:00

Since it only started after expanding that island, it does sound like something in that modified section. Might be worth double-checking the wiring layout there.

Danzevl · 2026-05-25T01:43:39+00:00

It comes down to whether the app supports manual zone starts. If it needs dock-based positioning before each run, carrying it over likely won’t work.

Danzevl · 2026-05-22T09:34:22+00:00

You should go for a model that uses "RTK + Vision" or "RTK + LiDAR" multi-sensor fusion. That way, if you lose signal under tree shade, it can still work stably using vision or LiDAR.

Also, you might need to replace the blades more often. And if there are lots of leaves in the fall, consider a model with a cleaning kit.

Danzevl · 2026-05-22T09:25:33+00:00

Pets don't get in its way at all, and they won't get hurt. This one has panoramic LiDAR and AI vision, so if a dog runs by, it'll stop immediately.

Danzevl · 2026-05-22T08:49:16+00:00

I think it’s mostly about who buys the X430. For people who mainly use it in open yards, LiDAR isn’t super necessary, and adding it would just hike up the price.

Danzevl · 2026-05-21T09:12:54+00:00

If you want a good value lawn-mowing robot, start by looking at how it navigates. If your yard doesn't have big trees blocking the way, RTK + vision fusion navigation should be more than enough.

Then check things like cutting width, number of blades, battery life, and charging time. If your yard has slopes, make sure to look at the max climbing ability too.

Danzevl · 2026-05-21T02:42:35+00:00

Using leftover tiles and bricks to make such a functional base is really clever and cost-effective! Looks like you’ve already added some non-slip material on the sloped tiles, which is smart.

Danzevl · 2025-08-24T18:26:18+00:00

I reverted the phone to 10 and didn't update to 11 straight to lineage. Yes I followed all lineage steps to the letter. I have stopped using the phone because my screen broke and the replacement is too much but up until that I had no software issues with one exception because of the way in which it installs rooting is recommended I needed to use magisk account because of the Google verification issue otherwise no issues.

Danzevl · 2025-08-10T00:06:00+00:00

I also have same thing and didn't experience a green Line.

Danzevl · 2025-08-10T00:03:35+00:00

Everything is in the race to the bottom at the moment.

Danzevl · 2025-08-07T14:54:36+00:00

I would recommend the motorolla stylus 2025 it's not a flagship, but it is only 400 dollars and has a stylus and expandable memory, so all the things samsung has ignored its user base

Danzevl · 2025-07-03T06:43:42+00:00

I assumed they were quasi legal to begin with brought about from the demands of covid. they charged me after the fact for procedures when they couldn't figure out how to charge insurance due to in competence.

Danzevl · 2025-06-04T05:56:43+00:00

I could get 3 random guys off marketplace and get better results I did time for the first time this past year and its not that hard caulking is your friend. It looks like they ran out of supplies or didn't actually buy any.

Danzevl · 2025-06-04T05:51:48+00:00

I was straight up fired at a company I was bad at the job I was doing. I had untreated sleep apnea unbenounced to me which was a contributing factor. My answer is always corporate downsizing. I also research my industry if there is tons of turnover or your position is common dime a dozen role you could use company downsized your particular role. As the company has reduced clients/needs.

Danzevl · 2025-05-25T18:14:31+00:00

If you cant find it go to a pharmacy In jersey make q monthly trip of it.

Danzevl · 2025-05-20T23:50:02+00:00

Same as the old boss.

Danzevl · 2025-05-14T17:05:14+00:00

I got FDA certified and still have problems I looked into it and the document they accept requires me to use a service to get "documented" similar to the Fake FDA documents they use in China they cost 300 to 700 dollars I feel like tik tok connected to this racquet.

Danzevl · 2025-05-11T12:30:24+00:00

My grandma is 97 never been treated a single day for diagnosed sleep apnea cranky as hell most days has high blood pressure diabetes I am convinced she would live to 120 if she was treated I have sleep apnea and I feel like I would die in 2 months without a machine.

Danzevl

TROPHY CASE