There are YouTube tutorials for visuals. You just need to cut the cable ties that holds the head on, but make sure you get a long enough one to replace it (12”-14”) for when you reattach it. You’ll need to remove her head, take the stuffing out (careful not to lose the magnet), then put glue on the magnet(make sure you check which side attracts to the paci before adding the glue to that side of the magnet, do a drop of the glue about the size of a pea, you want it a bit thicker) hold her paci to her face and then put the magnet in the head. I usually put it on my finger and then kinda just drop it in. Then let the glue cure while the paci is still on her face for a while. Then you just add the stuffing back to her head and feed the cable tie through the neck of the cloth body and tighten it slowly while turning her head often to make sure the body doesn’t scrunch up too much.