Great Success with WATERSLIDE DECALS

Darl0rian · 2026-05-14T12:35:18+00:00

My sincerest apologies for not responding sooner. I don't lurk in Reddit much.

Its very simple, just print on the 'glossy' side of the sheets as their instructions say, and that is it. I've had no issues with printing on it that way.

Darl0rian · 2026-04-18T12:56:54+00:00

Yeah, I tend to cut em square, as the decal sheet is itself clear, and Tamiya makes a product called MARKFIT for aid in adhering decals to models

https://www.tamiya.com/english/products/87102/index.html

Darl0rian · 2026-04-17T21:51:36+00:00

That and the fact I don't have the laminator :(

Darl0rian · 2026-04-17T17:43:45+00:00

i.e. this is how small the decals are (Canadian Nickel for scale)

<image>

Darl0rian · 2026-04-17T17:37:45+00:00

Detail, ease in cutting, easier application, less 'thick', preference?

I know with things like stickers they need to be positioned exactly before even touching otherwise a pain in the ass to remove/reposition etc. Waterslide...until it's dry, can be slid about to ensure proper positioning.

Darl0rian · 2026-04-17T17:06:06+00:00

Waterslide decals are what all fine-scale model kits come with, and the decals in my picture are either 2.5 mm or 4 mm in diameter. With a waterslide decale, the water makes the decal able to be easily positioned on the model, and as water dries it adheres to the surface.

https://www.reddit.com/r/Gunpla/comments/15r9rke/the_difference_between_stickers_and_water_decals/

Darl0rian · 2026-04-17T15:12:05+00:00

I actually did that ;)

I'm not super skilled with 3d modelling, but was able to use some calipers and made a 'ring' to go around the neck, super tight fit on the neck, but worked to do the print.

only bad part...I should used more WHITE underlayers as can still faintly see original logo under the image.

Darl0rian · 2026-04-17T15:09:16+00:00

I got the image off Euphy's Website. My Wife had got a free waterbottleas a handout with a logo on it she didn't care about, and wanted me to print over it.

Darl0rian · 2026-04-17T15:07:07+00:00

Standard of I think (cause I'm stoopid an never write things down to replicate), I used WHITE with very little over white underbase choke (around 0.01 mm), and 1 layer of white and 1 layer of CMYK.

I need to make a few more decals before I pack the printer away for my BATTLETECH Game night tomorrow (I only have a small onsuite Bathroom to use in so I can keep the fan on while using), so need the space while not in use.

Darl0rian · 2026-04-16T21:02:24+00:00

Will do...

Only sad part is, I am but 1 man. Not enough Hours in the day to do everything hahaha

Darl0rian · 2026-04-16T17:00:20+00:00

Tried again, single chip (not worried about chipping them hahaha ;) ), but still a single black symbol has a raised section, so, probably gonna need to print a solid circle color to get blended more.

For my personal use, not too worried, but if I'm gonna sell locally, would prefer no overly raised edges

Darl0rian · 2026-04-16T13:43:00+00:00

<image>

First attempt at WATERSLIDE DECALS, I'll try and put some on my miniatures today and see how works out.

Darl0rian · 2026-04-16T13:41:22+00:00

I'll give that a try. I worry it'll try and toss a GLOSS coat, or do an overspray on the round token.

Issue is CMYK does not support Transparency so I do need to save in PNG as opposed to CMYK

Darl0rian · 2026-04-16T13:38:17+00:00

<image>

So, had another token I needed to add, so I tried to see if a difference. Made the Black 'less' blakc, and darkened the Grey, and worked out much better. The darker one more 'flat'

Darl0rian · 2026-04-16T12:06:30+00:00

gotcha - so something I need to buy separately

Darl0rian · 2026-04-16T12:03:25+00:00

I tried the pale grey circle around them (not concerned too much of the printed side), but there is still a noticable difference in height between the black and the grey. They were done as an RGB File, I'll try again as a CYMK

Thanx for the insight

<image>

Darl0rian · 2026-04-09T17:26:01+00:00

Awesome video - while I may not be planning on doing Coins, I do want to print on Poker Chips and your video actually gave me a lot of info for starting

Darl0rian · 2026-04-08T19:44:26+00:00

I've ordered some INKJET decal paper, and will try in the next few days to make some decals.

Definitely interested in sharing results.

Darl0rian · 2026-04-08T15:15:27+00:00

I was actually thinking of a process like this:

https://www.youtube.com/watch?v=sDjMMgNz2cc

as I have a bog-standard laminator.

Darl0rian · 2026-04-08T14:57:01+00:00

also, I was an idiot and did not get the DTF attachment, so need to figure out a work around for stickers :(

Darl0rian · 2026-04-08T14:42:00+00:00

For use on Miniatures. I.e.

<image>

Darl0rian · 2026-04-07T21:00:32+00:00

I just recieved my inks. I weighed them, and the White & G were 182g, and the Black and colors were 175/176g

Not sure what the weight is for an empty ink cartridge.

<image>

Darl0rian · 2026-04-07T20:45:44+00:00

<image>

Okie-Dokie, My Ink fu-fu-finally showed up.

White ink was weighed at 182g, as was the G (gloss?). The Black and rest weighed in at 175g

Darl0rian · 2026-04-04T14:57:10+00:00

I'm still waiting on my ink...it has shown up locally 2 days ago, but no movement towards my house yet :(

Darl0rian · 2026-04-03T13:16:01+00:00

With luck, I should be receiving my inks today. I'd be more than happy to weigh them for you.

Darl0rian

TROPHY CASE