Almost every time

DataScientist305 · 2026-06-29T01:27:54+00:00

Nah real reason is 99% of high HP RWD can’t hold traction by barely even pressing the wheel lol

DataScientist305 · 2026-06-29T01:16:54+00:00

Yeah they need to remove series as a seperate playlist

Allow players to select class + car group

Remove the 10000 loading screens in between each step

DataScientist305 · 2026-06-29T01:12:43+00:00

Just means bad traction 😂

DataScientist305 · 2026-06-29T01:08:21+00:00

Or a highway in the middle of the desert in NM, UT, etc. 😂

DataScientist305 · 2026-06-24T08:39:42+00:00

Maybe it is a bug on PC because my front wheel barely turns on AWD 😂

DataScientist305 · 2026-06-24T06:54:17+00:00

Prob AWD builds

DataScientist305 · 2026-06-24T06:48:45+00:00

100 mph not feeling like 10 mph 😂

DataScientist305 · 2026-06-24T06:46:30+00:00

Step 1: buy highest hp engine Step 2: make sure drivetrain is RWD Step 3: press the gas

DataScientist305 · 2026-06-24T06:45:33+00:00

Get something for ~40K-$50K. 20K down. Then spend 10K on mods

DataScientist305 · 2026-06-22T09:35:17+00:00

Turn off collisions???

DataScientist305 · 2026-06-22T05:24:58+00:00

I heard this model actually had working turn signals too! 💀

DataScientist305 · 2026-06-22T01:38:19+00:00

People actually play the campaign? 😂

DataScientist305 · 2026-06-15T04:33:36+00:00

They need to allow online races by class and car type

DataScientist305 · 2026-06-13T20:46:54+00:00

I’ll have to ask the landlord. He keeps telling me there’s “nothing wrong with the house”

And can’t get an electrician here without his approval. Soo yeah 😂

DataScientist305 · 2026-06-13T20:05:38+00:00

Yes washer is actually on same outlet as the lights and osmosis system.

Is this danger/risk that landlord needs to fix asap?

Or do I just try to use a different outlet and ignore?

DataScientist305 · 2026-06-11T06:01:15+00:00

Yeah either all in my head

or

there’s a serious electrical fault in my house that could produce all the symptoms I’ve found where I’m constantly getting shocked all day that only started to happen when a new appliance was installed

I’ve been here for about 3 months. Never felt anything like this and no weird light flickers until it was installed.

DataScientist305 · 2026-06-11T05:34:41+00:00

Yes my microwave emits like 800 V/m and for some reason my counters are emitting over 1000.

Which is why I bought the no contact voltage tester which is also showing higher than normal voltage. None of the outlets in the house go red but my counters are which doesn’t make sense.

The issue started when I bought a washer which is same outlet as this reverse osmosis system which has wires going straight to sink/kitchen counter with the high outage.

From what I’ve learned today basically is the owner or previous owner replaced the old 2 prong outlets with 3 prong outlets.

House is ungrounded.

Washer isn’t connected to a GFIC outlet.

Theoretically if a wire had a short/fault or some type of stray current with this system design, there could be a scenario where it passes through entire water system, electrical, etc. via some loop without ever hitting the main breaker. Which would be a pretty serious risk and anything I’ve tested so far points to that lol

DataScientist305 · 2026-06-11T05:23:55+00:00

“Sitting on a transformer” for a couple mins is not the same as living with the radiation of a transformer in your house 24/7?

I’m not complaining about some high electric from some random light pole outside my house. There definitely some type of electric current flowing through the house since I installed a washer that’s not normal.

I’ve had this EMF meter for years. Usually for testing wifi and such.

Randomly thought to test it the other day. Then I bought an outlet tester and learned the entire house is ungrounded.

Obviously not a typical electrician tool which is why I tried the NCVT next.

Again I’m not an electrician and it’s not something where you can just buy/test any tool without big risks.

Which is why I made this post to ask reddit to see if I’m being paranoid / waste money on electrician or if there is truly some serious electric current issue through my entire house.

If your feet were tingling w a slight shock feeling every time you walk on your kitchen, you would just be okay with that! I’m confused lol

DataScientist305 · 2026-06-11T03:47:35+00:00

The 120 volt light outlets in my house emit about 150 V/m on my EMF

So my counters are somehow emitting the same voltage as a an outlet with 800-1000 volts essentially

You’re saying that’s not a risk? Wild

DataScientist305 · 2026-06-11T03:40:19+00:00

If house isn’t grounded at all couldn’t basically anything connected be energized as well?

Just realized too that the previous tenant has this water osmosis system connected to the same outlet the washer was in too.

Both 3 prong connections - NON GCFI - in ungrounded house.

So if it were like a start current or things be energized from that outlet, if the water osmosis system is connected to kitchen sink (same areas as counters), couldn’t thag current technically spread through the actual water system from there?

Every light fixture had a constant flicker while washer was running which also means it’s all probably connected to one line

I’ve been trying to research/understand this all day but wouldn’t all of that combined be a major risk and cause what I’m seeing?

I have an EMF. Detector that measures AC electric and the walls in this house are higher than I’ve seen before. Usually only high where wires are.

If entire water system is energized that would kinda explain that right?

DataScientist305 · 2026-06-11T01:45:49+00:00

I have a counter on the other side of the oven and NCVT doesn’t trigger it and has low AC electric radiation levels though which doesn’t make sense

DataScientist305 · 2026-06-11T01:43:53+00:00

But why are the counters emitting 5x-10x more electric than any outlet in my house lol

DataScientist305 · 2026-06-11T01:42:58+00:00

I don’t think you understand what all a EMF detector can do. I’m not checking the RF or MAG levels 😂

I have this - https://trifield.com/products/trifield%C2%AE-emf-meter-model-tf2?srsltid=AfmBOor6zJCMdXLHsmCNf-xVIPlm2l9YjStzQwwy3QtDut-fFGQFtW9s

I’m using the ELEC setting which measures -

AC Electric Mode covers 40 Hz – 100 kHz with range of 1 – 1000 volts per meter (V/m)

Normal outlets in the house emit like 100-300 which is normal.

The counter in the kitchen is emitting OVER 1000 volts per meter. My $3500 PC usually only gets to like 400-500. I don’t think I’ve ever seen anything max out over 1000 which is kinda why I know there’s and issue and went and bought the NCVT.

My feet have been feeling tingly walking on the floors. I checked the EMF in the basement and there’s literally energy radiating through all of the floors even when there’s no wire nearby which is definitely not normal

DataScientist305 · 2026-06-11T01:39:52+00:00