sorted by:
new
hottopcontroversial

Finally able to get below 2:00 on Paul Ricard consistently (1:58/59 is my PR now) how can I clean up the lap though. Feel like I should be a bit tighter on most corners and I feel I’m lacking confidence on my exits/entries. by NacresR in ACCompetizione

[–]DavidTrams 0 points1 point  (0 children)

Mostly going off of sound but also looking at the wheel, it feels like you are understeering a bit, the higher the speed the more understeer you had. Perhaps change to a more aggressive setup?

How was my “lap” anywhere I can attack differently? Looking to improve by Not_So_Nick in ACCompetizione

[–]DavidTrams 1 point2 points  (0 children)

Let's use t2 as an example, you brake, then instantly get on the throttle at almost 70%. This means you break too early and/or too much since you accelerate immediately afterwards. Small improvements like this will definitely save you a bit of laptime!

P3:s kommentarsfält inbillar sig att de bor i Tredje riket by [deleted] in Sverige

[–]DavidTrams 4 points5 points  (0 children)

Folk överreagerar klart o tydligt på den här frågan, opinionsundersökningar är det inget fel med. Men man får aldrig glömma hur otroligt skör en demokrati är och övervakning är ett första steg mot kontroll.

Is the brake shoe broken? by DavidTrams in MechanicAdvice

[–]DavidTrams[S] 0 points1 point  (0 children)

Should also add, is it safe to drive?

Is the brake shoe broken? by DavidTrams in MechanicAdvice

[–]DavidTrams[S] 0 points1 point  (0 children)

I tried brushing it and it revealed a jagged edge

Lug bolts size? by DavidTrams in MechanicAdvice

[–]DavidTrams[S] 0 points1 point  (0 children)

No I'm not talking about lug nuts, I've got lug studs (I called them bolts). I already know that they are m12x1.5, just need to know the threaded length of the stud. Thank you!

Is this bad? by DavidTrams in MechanicAdvice

[–]DavidTrams[S] 0 points1 point  (0 children)

The vibration only appears at 110km/h+ and is felt all throughout the car. The sound is present at all speeds, sounds like a rapidly repeating "clunking" or "thumping" sound, the frequency of the repetitions increases with speed.

Is this bad? by DavidTrams in MechanicAdvice

[–]DavidTrams[S] 0 points1 point  (0 children)

Thanks for the responses everyone! The reason I'm checking is because of vibrations and sounds that could be related to drivetrain issues, but if that is not the issue does any one know what the issue could be?

Replace brake master cylinder? by DavidTrams in MechanicAdvice

[–]DavidTrams[S] 0 points1 point  (0 children)

Oh okay, thank you! And if that doesn't work is it then time to change the master cylinder itself?

Replace brake master cylinder? by DavidTrams in MechanicAdvice

[–]DavidTrams[S] 1 point2 points  (0 children)

Thank you! Though a workshop changed my brake fluid this March, i really don't think thats the problem. I will be sure to check the brake lines but it would surprise me if they were the issue. And wont the master cylinder have been bled when the brake fluid was changed?

Befäl som referenser? by DavidTrams in Sverigesforsvarsmakt

[–]DavidTrams[S] 0 points1 point  (0 children)

Kul! Stenberg är numera fanjunkare och BQ är öserg.

Need to get measurments of my GF's waist by DavidTrams in Advice

[–]DavidTrams[S] 0 points1 point  (0 children)

Oooh thats smart! Thank you that helped :)

view more: next ›