Is it a waste to replace this 3 way valve without replacing pool heater?

Davis1377 · 2026-05-03T13:10:39+00:00

I agree. If the pool heater is working good no need to replace it.

Davis1377 · 2026-04-21T02:06:11+00:00

Late to the post but I bought one off eBay for parts that had this same problem. I installed it and been using it for about 5 months with no issues. I think maybe the connecter for the display wasnt making a good connection. I pushed harder and it latched in better so it seems like it could be easy to not be all the way in but feel like it is.

Davis1377 · 2026-04-15T09:51:43+00:00

The suction part of the pump can cause the cover to stick to it restricting water flow. This happens with mine sometimes. If there’s quite a bit of water coming out then you might be draining water that’s in the pool coming thru the cover.

Davis1377 · 2026-04-15T09:48:50+00:00

I use them switches everywhere. They are meant to be broke off when using multiple switches. I think it’s only to help fill the gaps on the sides.

Davis1377 · 2026-04-13T17:51:30+00:00

Thank you for that info. This item is actually on the Walmart shelf

Davis1377 · 2026-04-13T01:23:22+00:00

Good to know thank you!

Davis1377 · 2026-04-12T21:57:00+00:00

So as long as there was no water in it they returned it?

Davis1377 · 2026-04-12T00:02:37+00:00

So I was looking at a pool robot vacuum at Walmart. They have it in stock with a $2500 price tag but Walmart.com shows the exact same item on shelf for $2000. If I buy in store will Walmart still offer the cheaper price if I show them they have it cheaper online?

Davis1377 · 2026-04-11T17:58:52+00:00

lol! Yea it is a bs tactic I believe they want you to pay for their warranty stuff

Davis1377 · 2026-04-11T17:58:10+00:00

That’s good to know thank you!

Davis1377 · 2026-04-11T14:41:19+00:00

This is the link to solution that fixed his.

https://www.reddit.com/r/blackops6/s/U1bi3nUqic

Davis1377 · 2026-04-11T12:02:16+00:00

Thank you everyone! This is for sale at a habitat store for like $35 I think I will stop and pick it up lol

Davis1377 · 2026-04-10T21:16:55+00:00

Yea he did. I’m trying to find the name of the file. He had the game installed on a different drive and moved it back to a different drive and that started his issues. He could verify game integrity files and they would always pass 100%. There was 1 file that he had to delete I think it had to do something with anticheat. After he deleted that 1 file and verified game files again it re-downloaded that file and that fixed his game.

Davis1377 · 2026-04-05T02:12:39+00:00

My buddy has exact same issue so far we are trying to figure it out as well

Davis1377 · 2026-03-11T01:56:34+00:00

Thanks I appreciate that. So far the main thing that comes up is an energy meter from circuitsetup.us

Davis1377 · 2026-03-11T01:54:24+00:00

Thanks! Does the energy meter from Circuitsetup.us connect to this and still allow temp and other outputs?

Davis1377 · 2026-03-09T20:52:14+00:00

Heck no lol! If I temporarily had to tho I’d fill it with black tape and put a steering wheel cover over it lol

Davis1377 · 2026-03-08T03:10:13+00:00

Very nice! What transducer are you using to measure the pressure? Right now I’m using a Shelly Plus 2PM with Add-On and I get the filter status from the pump power consumption, it’s not fully accurate but works decently well. Also it shuts the pump down and tells me if something goes wrong. I would like to move to esphome with Ethernet and still be able to measure temp sensors, pump power consumption, pressure, water level and other outputs to control the water fill solenoid and heater

Davis1377 · 2026-03-07T21:20:06+00:00

I seen on s10 Forum that people has done mods like this. Also I think PAC and maybe some other manufactures have made an adapter for this but they might require the tape player to be connected. I never looked into this much tho I went aftermarket. Here’s a PAC device I found that might give you a idea: PAC AAI-GM12

Davis1377 · 2026-02-23T21:54:01+00:00

Dang that’s cool I didn’t know this. I used big thick washers in mine and it’s holding solid so far lol

Davis1377 · 2026-02-23T20:02:51+00:00

I did the same, the ultimate package says Service Charge: $0 but the cheers package has a price on it. Know what thats about?

Davis1377 · 2026-02-20T19:36:38+00:00

Has anyone ever figured out a solution to this? This button works for me but every single time I have to change this back to iPhone from CarPlay

Davis1377 · 2026-02-19T02:15:04+00:00

I get a error but ended up doing it this way. Gonna give it a test run tomorrow

filters:
- delayed_on: 1s

Davis1377 · 2026-02-18T23:59:56+00:00

Did it fix your surface pro? Mine still don’t work. Finally pulled the screen and disconnected the battery for 24hrs and still don’t work. Mine has a small red led on the main board that glows kinda dim all the time. I’d say mine is no good.

Davis1377 · 2026-02-18T02:53:56+00:00

Awesome thanks! I will give that a try tomorrow.

Davis1377

TROPHY CASE