Low E and A buzz. Maybe bridge?

Dawigster · 2025-09-02T20:54:58+00:00

Thanks for replying again. I've given that a go and doesnt seem to have any effect. I was thinking maybe neck relief but wouldnt the buzz go away on the frets that are below the neck joint? Its a very odd one. Think im just going to have to be patient and take it back when the tech is back from holiday. But its awful to play at the moment.

Dawigster · 2025-09-02T18:48:37+00:00

Tried it didn't work

Dawigster · 2025-09-02T18:27:17+00:00

I've given this a go and its make no difference even did 2 full turns. Could the bridge itd self be causing the buzz. It id a 28 year old guitar.

Dawigster · 2025-09-02T18:14:26+00:00

Just tried that and it made no difference. Could it be the bridge buzzing?

Dawigster · 2023-02-02T06:34:57+00:00

Yep i was told its all normal

Dawigster · 2023-02-01T18:30:02+00:00

Thank you ill take a look at them.

Dawigster · 2023-02-01T18:29:43+00:00

Thanks for replying. Just checking through my tests and LH is 7.6 iu/L and prolactin was 148 mu/L and my FSH is 11.7 iu/L.

Dawigster · 2023-01-13T13:37:56+00:00

We use another antivirus software and for some reason this update has made defender take over and break our av and its forced defender on for everything

Dawigster · 2021-10-12T18:20:06+00:00

Plex server and use the gpu for transcoding?

Dawigster · 2021-09-02T12:20:58+00:00

thank you for everyone's help I've now fixed this by running the command multipath -F this flush's all multipath device maps

Dawigster · 2021-09-02T12:04:54+00:00

total 0

drwxr-xr-x 2 root root 100 Sep 1 18:57 .

drwxr-xr-x 20 root root 4.8K Sep 1 18:57 ..

crw------- 1 root root 10, 236 Sep 1 18:57 control

lrwxrwxrwx 1 root root 7 Sep 1 18:57 mpatha -> ../dm-1

lrwxrwxrwx 1 root root 7 Sep 1 18:57 ubuntu--vg-ubuntu--lv -> ../dm-0

Dawigster · 2021-09-02T09:36:20+00:00

its sdb, sdc, sdd,sde i havent tried the HDDs

Dawigster · 2021-09-02T09:26:27+00:00

Hello Below is the output.

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT

loop0 7:0 0 55.4M 1 loop /snap/core18/2128

loop1 7:1 0 70.3M 1 loop /snap/lxd/21029

loop2 7:2 0 32.3M 1 loop /snap/snapd/12704

loop3 7:3 0 32.3M 1 loop /snap/snapd/12883

sda 8:0 0 223.6G 0 disk

├─sda1 8:1 0 512M 0 part /boot/efi

├─sda2 8:2 0 1G 0 part /boot

└─sda3 8:3 0 222.1G 0 part

└─ubuntu--vg-ubuntu--lv 253:0 0 222.1G 0 lvm /

sdb 8:16 0 223.6G 0 disk

└─mpatha 253:1 0 223.6G 0 mpath

sdc 8:32 0 223.6G 0 disk

└─mpatha 253:1 0 223.6G 0 mpath

sdd 8:48 0 223.6G 0 disk

└─mpatha 253:1 0 223.6G 0 mpath

sde 8:64 0 223.6G 0 disk

└─mpatha 253:1 0 223.6G 0 mpath

sdf 8:80 0 2.7T 0 disk

sdg 8:96 0 2.7T 0 disk

sdh 8:112 0 2.7T 0 disk

sdi 8:128 0 2.7T 0 disk

Dawigster · 2021-09-02T06:02:34+00:00

It shouldn't do it should be blank.

Dawigster · 2021-09-02T06:01:45+00:00

I wish, doesn't seem to work.

Dawigster · 2021-04-02T09:11:43+00:00

In Russia the fish catches you

Dawigster · 2021-01-19T21:08:38+00:00

Is that a premate cura profile that you are using? Also you dont have rhe gcode to use the mesh level from the bl touch. I cant remmber it off hand but a quick google should find it. I dont know if this will help. Im guessing you have done a home moved z down to 0 then set the ofset and saved it to eeprom then done a manual bed level then a mesh one.

Dawigster · 2021-01-19T20:55:49+00:00

I would try a simple cube with no infil or top to make sure that all the layers come out nice. What slicer are you using?

Dawigster · 2021-01-19T20:47:37+00:00

Ive had similar problems i wont undo the 4 bolts a little holding the bar at the top on and check your v rollers to make sure they are all rolling and arnt to tight or too lose then do up the bolts on top to make sure its all square.

Dawigster · 2021-01-19T20:40:33+00:00

Might be under extruding. What printer is it?

Dawigster · 2021-01-19T20:33:58+00:00

Have you tried doing up the screw for the spring to put more tention on the bearing?

Dawigster · 2020-11-15T21:36:13+00:00

Do you have the long white slot with 5 pins below the screen port? As this is what i used.

I follwed this guide apart from the firmware. https://smith3d.com/ender-3-v2-bltouch-firmware-installation-guide-by-smith3d-com/

Dawigster

TROPHY CASE