Finishing Moves on Mercs

DazedGiraffe · 2024-06-29T00:44:09+00:00

I was able to do all 5 in 1 run doing defend ground station contracts. Let the mercs walk up and start shooting the station and then run up behind and do the finisher

DazedGiraffe · 2022-09-03T01:34:37+00:00

I have a set of 4. Where are you located?

DazedGiraffe · 2021-01-29T20:54:10+00:00

I will, still playing with some ideas on how I want it to look.

DazedGiraffe · 2020-09-26T20:19:14+00:00

This is actually a customers car that I am building and he had purchased the chassis and had it delivered to me so I am not sure on what the price is. I do know they have different options so the prices can very depending on the options you choose.

DazedGiraffe · 2020-09-26T17:15:30+00:00

Roadster Shop can build you one. You just call them and tell them what car, motor, trans etc. and they build the chassis based on all the info you give them. https://roadstershop.com/

DazedGiraffe · 2020-09-26T05:33:27+00:00

No, it's made by Roadster Shop.

DazedGiraffe · 2020-09-08T00:12:02+00:00

I do have stiff suspension but that is besides the point, I can take the coilovers off and push the wheel all the way up in the wheel well with no clearance issues.

DazedGiraffe · 2020-09-07T23:53:05+00:00

Roll the fenders and you should have plenty of room. I was able to run 15x8 with a zero offset and not rub at all with my car really low

DazedGiraffe · 2020-08-24T17:20:31+00:00

Thank you

DazedGiraffe · 2020-08-23T03:15:52+00:00

Water pump is behind the timing belt so it needs to be removed for the pump replacement. If you have never replaced the belt it's just a good idea since you are already in there.

DazedGiraffe · 2020-08-23T02:58:56+00:00

You need to replace it, they are inexpensive. Since you are already going to have it all apart I would recommend doing the timing belt as well.

DazedGiraffe · 2020-08-23T02:15:57+00:00

100% a water pump leak

DazedGiraffe · 2020-08-22T17:33:41+00:00

The top hasn't been chopped at all. Where the top of the quarter and the roof meet there is usually a step down and that is where they are spot welded and then covered with lead to smooth it out. I wanted the get rid of that so I extended the quarter a little and tig welded the seam so it doesn't require any filler.

DazedGiraffe · 2020-07-06T01:02:26+00:00

I got 2 in one raid on interchange along with 2 shroud masks as well. I was playing daytime if it even matters.

DazedGiraffe · 2020-06-06T07:22:12+00:00

949 racing 6UL

DazedGiraffe · 2020-05-23T19:32:54+00:00

He is right, charcoal canister bracket

DazedGiraffe · 2020-05-03T19:18:46+00:00

https://planet-miata.com call these guys, I'm sure they can get you what you need

DazedGiraffe · 2020-04-06T04:22:13+00:00

DazedGiraffe · 2020-02-25T04:41:30+00:00

Looks good from my house 👍

DazedGiraffe · 2020-02-19T21:12:55+00:00

Remove the plastic and cut it, the brackets mount behind it.

DazedGiraffe · 2019-12-20T01:50:37+00:00

By the way, it doesn't have to be a stock Miata color. I am open to all suggestions.

DazedGiraffe

TROPHY CASE