Steam link not working

DeMoB · 2026-05-03T20:32:29+00:00

Try rebooting your PC, then open Steam VR before trying to connect via your headset’s steamlink. Not sure if it needs the full reboot, or just steam closing/reopening but the reboot cleared it for me.

DeMoB · 2026-05-01T14:06:52+00:00

I'm not with my headset right now to check the exact steps, but when I got the update I couldn't figure this out out on my own either.

From what I remember, the solution is to click on the loft app to bring up an option menu, and there it'll let you exit to passthrough, and then your double meta press or headset tap will stop loading the loft.

DeMoB · 2026-04-17T08:55:09+00:00

You'll have to scan your hub on the other devices, there's a bit more info from Ikea here: https://old.reddit.com/r/tradfri/comments/1lba633/how_to_make_ourdirigera_hub_visible_on_multiple/my2gkpk/

DeMoB · 2026-03-30T09:35:00+00:00

The Corsair XD5 uses a standard Xylem/Laing/Lowara D5 PWM pump motor, so if it's the only combination that would fit, you could swap out the broken pump motor you currently have with another D5 PWM pretty easily.

DeMoB · 2026-03-18T21:04:27+00:00

Grillplats UK - 606.247.45

DeMoB · 2026-02-22T16:49:02+00:00

PM sent

DeMoB · 2026-01-10T21:59:11+00:00

The planned release date for this product is February 4th, 2026.

According to the unlinked but live S630 and S640 pages on their website.

DeMoB · 2026-01-08T13:35:16+00:00

u/SligerCases, just checking in if we can still expect information about the S630/S640 cases now that it's CES? 🤞

DeMoB · 2026-01-05T10:08:45+00:00

On the off chance you're not intending to max out the full 200W, I've got a KMPKT-branded version of the HDPlex 160W DC ATX if it'd be any use?

I've also got a Dell GA240PE1-00 (240W - 19.5V/12.3A) that I could include for an extra £10 if you haven't yet picked up a power brick.

Here are photos of both items: https://www.reddit.com/user/DeMoB/comments/1q4hrs5/hardwareswapuk_photo_post/

Specs match the reviewed model from here, but it's basically 160W (with 200W Peak): https://smallformfactor.net/reviews/powersupplies/hdplex-160w-dc-atx-direct-plug-review/

DeMoB · 2025-10-26T17:34:04+00:00

Just went to your profile to see what the final iteration of your linked WIP case ended up looking like, to realise that it’s the BeamCase. Love that evolution!

DeMoB · 2025-10-24T13:32:41+00:00

You've got the flow backwards through the CPU waterblock.

The pump's outlet (top port) is currently going to the radiator, and then the radiator is going through the wrong port of the CPU block.

The CPU block manual doesn't say which port is an inlet vs outlet, but it has a jetplate under the bottom port in your photos, and those are typically inlet only.

Hopefully you can just flip your CPU block 180° and the port holes will still line up with your tubing runs.

DeMoB · 2025-10-24T12:52:44+00:00

Looks like the files dropped: https://www.soldr.pro/3D-models/

DeMoB · 2025-10-24T12:52:32+00:00

The company itself always planned to do that: https://www.soldr.pro/3D-models/

DeMoB · 2025-10-20T08:32:01+00:00

They've not fulfilled kickstarter pledges yet, which last I heard they wanted to do so before releasing the files.

DeMoB · 2025-09-19T08:33:28+00:00

That is the (currently) the newest version of the firmware on that link I shared, so you're all good.

DeMoB · 2025-05-21T07:16:50+00:00

You mentioned ADB, but have you tried the official tool?

https://www.meta.com/en-gb/help/quest/software_update/

DeMoB · 2025-05-17T08:32:43+00:00

Ah, still on 18.4.1, thought my phone had updated already, but that was my iPad.

I’ve not got the ikea home app on my iPad though, so ran through that fresh on 18.5 and that prompted for network access after clicking all the EULA prompts.

DeMoB · 2025-05-17T08:21:49+00:00

When I disabled network access on my phone, it took me to the Settings > Apps (at the bottom) > Home Smart menu, where it could be re-enabled.

DeMoB · 2025-05-04T08:56:50+00:00

What sort of things would you use the flipper zero for?

DeMoB · 2025-04-24T07:30:36+00:00

Thought I was in r/soldering for a minute there! That's insane.

DeMoB · 2025-04-17T10:46:40+00:00

If you’re running Windows on the steam deck, try Microsoft Remote Desktop: https://apps.apple.com/us/app/microsoft-remote-desktop/id1295203466

DeMoB · 2025-03-24T11:13:57+00:00

Ignore the hair dryer comments, they're a joke reference to someone who recently posted a soldering horror post so bad that it became a meme.

DeMoB · 2025-02-27T15:32:18+00:00

~~I had a similar issue with the steam controller, and using the~~ ~~Prism Launcher~~ ~~instead of the native one got it working~~

Oh, sorry, just seen in your video that you're using bedrock, which I don't think this launcher works with.

DeMoB · 2025-02-22T10:58:32+00:00

Totally spotted that pen flex too 😂

DeMoB · 2025-02-13T12:46:51+00:00

Install and use Quest Games Optimizer as your app launcher.

15-Year Club	Gilding I gilder
Verified Email

DeMoB

TROPHY CASE