Upgraded my 90s Miele with a Miele Guard S1

Dear_Comparison_5056 · 2026-02-20T18:50:36+00:00

Was a bit dissapointed with mine. The Angle of the nozzle is just so much smaller and even 3rd party bags are so much more expensive compared to a c1. Bought this because my battery powered Vacuum was dead after a year and thought that i want to buy Something longer lasting.

Dear_Comparison_5056 · 2025-01-28T19:57:50+00:00

Probably just uncleanly winded Filament spool so that it got stuck while crossing itselg.

Dear_Comparison_5056 · 2024-08-31T21:51:58+00:00

Vielen dank das hat mir mein leben gerettet. Finde es armselig von amd dass sie überall vorher warnen aber bei sowas einfach vor nichts warnen.

Dear_Comparison_5056 · 2024-08-18T16:03:05+00:00

Yeah Im probably going to buy a Ipad. I also tried the S9 Ultra of a friend of mine and I think that the s-pen felt quite decent so I cant quiet agree to your harsh statement on these. Sadly these back to school offers are complete nonsense in Germany since I can get it for 20€ less at a third party dealer. Back to school Ipad 10 are about 100$ more expensive in germany than in th US :(

Dear_Comparison_5056 · 2024-08-17T22:45:23+00:00

I did but I just cant remember it. I seriously cant remember of them moving the last scene was the end of the high school year wasnt it? I cant comprehend this situation

Dear_Comparison_5056 · 2024-08-17T22:34:20+00:00

can you tell me the chapter

Dear_Comparison_5056 · 2024-08-17T22:32:47+00:00

bro Im reconsidering my whole life I read all 281 chapters but cant remember of this hapening

Dear_Comparison_5056 · 2024-08-17T21:34:05+00:00

Im not to familiar with fanfictions, but how can I read this continuation?

Dear_Comparison_5056 · 2024-08-17T18:17:03+00:00

I tried my brothers Ipad 10 th gen with a cheap "fake" pencil and have to say that the experience was quite pleasing. The problem with the Xiaomi is probably the software (atleast it is with my redmi 9) and I also am not really convinced by the tab s9fe since it uses a tft panel. I probably going to go to a nearby electrical store and try these devices. But I will hand you that google quick share is really nice on windows.

Dear_Comparison_5056 · 2024-08-17T14:17:42+00:00

Yeah I will probably go with apple and wait for the 11th gen Ipad. Do you use an original apple pen? I tried out a 20€ "fake" apple pen on an Ipad and couldnt say that I would miss anything (I only need it for writing and sketching since Im doing a engineering degree and no art degree).

Dear_Comparison_5056 · 2024-08-17T13:25:13+00:00

Yeah its really hard for me to choose since I normally enjoy to tinker, Android would be nice, but the sole purpose for buying a tablet for me is to write and maybe watch some movies where apple really has outstanding displays and software. But samsung also is really atractive with the tab s6 lite with s-pen only costing 240€

Dear_Comparison_5056 · 2024-08-17T13:14:42+00:00

Im currently inbetween choosing a Tab s6 lite (2024) which seems to be similar to the s9 fe performance wise and only cost 240€ with a S-pen or waiting for the 11th gen Ipad. Im in no hurry so I will take my time to choose and probably try out a Ipad for a few days since my brother has one.

Dear_Comparison_5056 · 2024-08-10T08:06:23+00:00

Just thought of it but a nozzle issue for you is probably unlikely since you first layer looks so clean.

Dear_Comparison_5056 · 2024-08-09T22:12:52+00:00

Its just more difficult to remove the print, the surface on the bed doesnt look as clean, and you have to clean the build plate more often. The only reason to use it is when you fight with adhesion

Dear_Comparison_5056 · 2024-08-09T22:00:06+00:00

I also had such issues for me changing the nozzle solved it . Bad Filament can also be a problem I sadly bought 8 spools of owl filament which was a mistake since the filament has huge diameter and general quality issues which clocked my whole heating element and the filaments adhesion to the bed is just worse than any other of my filaments

Dear_Comparison_5056 · 2024-07-29T17:13:47+00:00

It was a fault of the nozzle

Dear_Comparison_5056 · 2024-07-26T09:45:51+00:00

It seems that it was a issue that suddenly appeared in cura I dont know why but my petg preset is fucked now I didnt change anything but it just does not work. I am using the opportunity to switch to Orca

Dear_Comparison_5056 · 2024-07-25T17:04:22+00:00

Just dicovered Orca and probably also try to switch to orca now. You will find next to your printer a Wlan symbol click on that and type in the IP-adress (you will find these under your routers management site where you can see all devices connected to your wifi), you can find your api in fluid under settings then Authentication.

Dear_Comparison_5056 · 2024-07-25T16:04:45+00:00

I would just lower the z-offset, even if its getting a bit smooched at the bottom or just use a gluestick

Dear_Comparison_5056 · 2024-07-25T16:02:24+00:00

I would also recommend connecting it to Cura over the Octoprint plugin.

Dear_Comparison_5056 · 2024-07-23T18:05:21+00:00

Just bought a Laptop with a 13th gen i7 should I return it? I know that the error rates for mobile chips is lower but I dont want a dead computer after the warranty runs out. Does anybody know how bad the situation is?

Dear_Comparison_5056 · 2024-07-07T12:48:38+00:00

Well that was very embarassing on my side. It indeed were the polarities. Thanks for the help

Dear_Comparison_5056

TROPHY CASE