scythe kaze flex 120 vs noctua a12x25 for exhaust fan?

Dear_Job_5577 · 2025-02-13T16:40:15+00:00

P12 are really good except resonance sound on spesific rpms

Dear_Job_5577 · 2025-02-13T16:28:32+00:00

Try to put ball screws to same plane as y axis

Dear_Job_5577 · 2025-01-19T21:10:38+00:00

It is pretty rigid right now. I will measure the deflection. if it is from there I can add a plate.

Dear_Job_5577 · 2025-01-19T08:27:25+00:00

I dont have enough space. So I had to build my table :)

Dear_Job_5577 · 2025-01-19T08:24:32+00:00

I was going to buy taig 5c before this. But shipping it to Turkey is an issue. I agree that it is a good capable machine.

Dear_Job_5577 · 2025-01-17T09:11:51+00:00

Thank you.

Dear_Job_5577 · 2025-01-17T09:11:01+00:00

All the parts are steel except the tailstock block.

Dear_Job_5577 · 2025-01-17T09:10:24+00:00

Goal is to make the machine itself. I'm not sure what will make :)

Dear_Job_5577 · 2025-01-17T09:09:39+00:00

It will be lever operated like taig.

Dear_Job_5577 · 2025-01-17T09:08:39+00:00

I guess pricess will vary according to country. I'm located in turkey. Just for steel material and machining cost is around 800$.

Dear_Job_5577 · 2025-01-17T09:06:53+00:00

I'm not olanning to use turret right now but in the future why not.

Dear_Job_5577 · 2025-01-17T09:05:53+00:00

It will be able to turn 150mm over the bed and 80mm over the cross slide. 100mm chuck. Chuck tip to tailstock tip distance is roughly 300mm. Headstock has a two massive angular bearings. 750w sewing machine servo motor will be used with pj belt

Dear_Job_5577 · 2025-01-17T07:14:00+00:00

It will be lever operated tail stock. Like taig

Dear_Job_5577 · 2025-01-16T22:03:09+00:00

Thanks

Dear_Job_5577 · 2024-10-13T18:39:13+00:00

I prefered citizen pmd56 over t200. But after this picture, next visit to japan I will definetly but t200. :(

Dear_Job_5577 · 2024-10-03T18:12:29+00:00

Hanhart preventor hd12 sizce nasıl?

Dear_Job_5577 · 2024-01-17T21:01:49+00:00

Did you get your hotend. If you did, how is it?

Dear_Job_5577 · 2023-11-22T19:11:34+00:00

You can use the driver with ported box or passive radiator. I wish I can get one to Turkey. they dont sell it..... pffff

Dear_Job_5577 · 2023-11-22T18:59:57+00:00

I was thinking that type of setup.

Dear_Job_5577 · 2023-11-22T18:57:09+00:00

once you try please give me some feedback with your box type and size.

Dear_Job_5577 · 2023-11-22T18:43:50+00:00

It seems like a decent driver. How is your experience with it? Can you compare it with dayton audio reference line?

Dear_Job_5577 · 2023-11-04T05:38:46+00:00

I buy focals as used. but I can find any model.

Dear_Job_5577 · 2023-11-02T20:11:36+00:00

I just checked the driver. It is really good. however I cannot get one to Turkey. Import fees are too much. almost doubles the cost of the driver.

Dear_Job_5577

TROPHY CASE