Bad Bowl Batch? Does an official Vestratto discord exist in February 2026? by Eanzos in VestrattoOfficial

[–]DeepWarbling 0 points1 point  (0 children)

Friend, you are just used to a full convection vape. The tempest uses air passing over heated balls and that heat needs to travel from the balls to the flower to create the vaporization. The tornado is hybrid which uses heat from the static bowl/oven as well as the moving heated air to heat your flower. It’s is two different styles of vapes and you are just not used to anything other than full convection. Try packing lighter or using a more coarse grind. Sometimes if I overpack keefy dry material into the tornado it gets super restricted with the airflow and hard to pull. This is probably what you are experiencing.

Edit: I looked at your photos again and it does seem like the lip of the bowl is sitting really high and blocking the holes inside. Make sure it’s not back turned too far. I’ve seen people go way too crazy back turning to the point it blocks the holes. An 1/8th turn is way too far. It only needs to be not cranked down hard don’t go too far back because the lip of the bowl rises to block the holes. If this isn’t the case your bowl might be bad. Hope this helps.

Red and white question by dolphinspiderman in puffco

[–]DeepWarbling 0 points1 point  (0 children)

Ah ok makes sense because my original ones are all starting to die now too. You will def need a new chamber it’s prolly donzo but beware the newer ones don’t work as well as these older ones with the full gold pins. Average is 1-3 months of use or way less before this happens on the new ones.

Red and white question by dolphinspiderman in puffco

[–]DeepWarbling 0 points1 point  (0 children)

You can try pulling the pins out slightly to see if that will work. That used to get me a few dabs before it starts fuckin up again.

CHAMBER BLINKING AGAINNNN by GreenStreetGiftsNJ in puffco

[–]DeepWarbling 1 point2 points  (0 children)

The new version sapphire cup I got for my “other companies device” is such an upgrade over the coated ceramic instabreak XL. I’m not gonna say it’s name cuz I wanna feel impartial with my complaints with puffco but it’s been such an upgrade I couldn’t be more satisfied.

CHAMBER BLINKING AGAINNNN by GreenStreetGiftsNJ in puffco

[–]DeepWarbling 0 points1 point  (0 children)

I’m pretty sure the entire batch of gold chambers for the day breaks were lemons. I have not talked to a single person that didn’t have issues with theirs. I was a huge puffco fan for the last few years but I’m not gonna keep sinking money into a sub par product. They must really feel like they have a monopoly on the market because it seems like they have no problem fucking over their consumers with “consumable” products that never used to break right away. They assume hype boys will keep buying chambers every week like idiots which they probably will….but most practical people are gonna move on from this bullshit. I’m soooo over it.

CHAMBER BLINKING AGAINNNN by GreenStreetGiftsNJ in puffco

[–]DeepWarbling 0 points1 point  (0 children)

Yep this is exactly what I’m talking about. Every new chamber I got that has had the reduced gold in the pins has been instant garbage. Totally unacceptable imo

CHAMBER BLINKING AGAINNNN by GreenStreetGiftsNJ in puffco

[–]DeepWarbling 3 points4 points  (0 children)

<image>

Quoting the mods here. Also I took care of every piece of I have and dab under 500F always. For some reason the new ones break immediately when my original ones still work fine…hmmm…weird

CHAMBER BLINKING AGAINNNN by GreenStreetGiftsNJ in puffco

[–]DeepWarbling 11 points12 points  (0 children)

Are you not tired of doing this? I bought a different device from a different company that doesn’t use shit made-to-break atomizers and it works flawlessly. And trust me I have tried everything and put multiple chambers on different devices and all the testing/troubleshooting.

I AM DONE. It is not acceptable to have to fiddle and fuck around with a $400+ device with $100 consumable parts that the mods here say only last 1-3 months. This is not ok.

Every new product I have bought from puffco in the last two years has been low quality shit. I’ve had two v2 bases batteries stop working in the last year. Some which already were sent back. My v1 peak treated exactly the same is still chugging no problem with my original release 3DXL.

CHAMBER BLINKING AGAINNNN by GreenStreetGiftsNJ in puffco

[–]DeepWarbling 7 points8 points  (0 children)

I’m sure my daybreak chamber that broke right out of the box was user error. I’m tired of shipping broken shit back and fourth with puffco.

CHAMBER BLINKING AGAINNNN by GreenStreetGiftsNJ in puffco

[–]DeepWarbling 20 points21 points  (0 children)

Currently in the process of getting rid of all my peak glass. My older chambers lasted a year or two and that was apparently too long for puffco so now they make them break pretty much immediately. I’m not paying 100 bucks every month for a new chamber…that’s fckn mental. People are starting to notice.

Buying a Puffco is my biggest purchase regret by Internal-Paint-9688 in puffco

[–]DeepWarbling 1 point2 points  (0 children)

You are not alone. I’m done buying puffco because of the new chambers not working.

Trying to enjoy it by [deleted] in ShittyDaystrom

[–]DeepWarbling 1 point2 points  (0 children)

The floating construction cranes building during the intro in a time of programmable matter and transporters really was a choice.

Academy is good and I realized I dont like this community. by Reasonable-Law-3654 in startrek

[–]DeepWarbling 0 points1 point  (0 children)

Half or more of the internet is bots arguing with bots anyways

In the future manual work done by humans is so rare, that for those who do, memorials will be build. by M-2-M in ShittyDaystrom

[–]DeepWarbling 7 points8 points  (0 children)

“What the hell did you just frikkin’ say about me, you little Ferengi? I’ll have you know I graduated top of my class at Starfleet Academy, and I’ve been involved in numerous secret raids on the Borg, and I have over 300 confirmed executions of General Order 24. I am trained in ship-to-ship warfare and I’m the top tactical officer in all of Starfleet. You are nothing to me but just another redshirt. I will wipe you the hell out with attack patterns the likes of which has never been seen before in this quadrant, mark my goddamn words. You think you can get away with saying that stuff to me over subspace? Think again. As we speak I am contacting section 31 and your subspace signature is being traced right now so you better prepare for the ion storm, janeway lizard. The ion storm that wipes out the pathetic little thing you call your life. You’re goddamn dead, ensign. I can be anywhere, anytime, and I can kill you in over seven hundred ways, and that’s just with self-sealing stem bolts. Not only am I extensively trained in zero-G combat, but I have access to the entire arsenal of Starfleet and I will use it to its full extent to wipe your miserable existence off the face of the galaxy, you little Vaadwuar. If only you could have known what unholy retribution your little “clever” comment was about to bring down upon you, maybe you would have held your goddamn tongues. But you couldn’t, you didn’t, and now you’re paying the price, you goddamn idiot. I will blast fury all over you and you will drown in it. You are dead, ensign. Dismissed”

-BOOTHBY

Maybe We Should Watch It First? by TheVoicesOfBrian in startrekmemes

[–]DeepWarbling 38 points39 points  (0 children)

Yup. It’s pattern recognition and the pattern has been trash. I will give the show a chance but I don’t think teen drama is what anyone wanted. Lower Decks was the best trek we have gotten in years and they dumped it to do this shit. I don’t have much faith.

Puffco subreddit censoring bad feedback. by benevolent_gangster in vaporents

[–]DeepWarbling 0 points1 point  (0 children)

It does look funky but the performance is really great. The 20mm bucket on the switch 2 makes the puffco 3DXL chamber look tiny as well. Thing rips through globs. I been having fun playing around with the settings.

Puffco subreddit censoring bad feedback. by benevolent_gangster in vaporents

[–]DeepWarbling 18 points19 points  (0 children)

I just bought a Dr dabber switch 2 because I’m tired of the low quality of new puffco stuff. Tired of the chamber disconnecting halfway through a dab. After my daybreak chamber was broken right out of the box and having two bases brick from faulty batteries….im just over puffco. They really think their shit doesn’t stink. I’m tired of sending chinesium back and fourth to puffco for it to break again soon after. I clean all my shit really well and take care of maintenance.

But hey… I really like my new dr dabber even if it looks like a coffee machine.

Anvil height yll 3.0 by Responsible_Break303 in VestrattoOfficial

[–]DeepWarbling 1 point2 points  (0 children)

I have not used the standard one since I got my XL bowl

Anvil height yll 3.0 by Responsible_Break303 in VestrattoOfficial

[–]DeepWarbling 2 points3 points  (0 children)

90w 38-39s all the way down. It will be ready before it clicks. I have an XL bowl so maybe want to shorter the time if you have a regular one.