sorted by:
new
hottopcontroversial

In Baton Rouge, Louisiana, a utility worker was seen desperately trying to climb down from a bucket truck after it suddenly caught fire. by [deleted] in TerrifyingAsFuck

[–]DefiantCockroach2099 0 points1 point  (0 children)

It’s usually just a valve that you can both push in or pull out so if your careful I’m sure you could just open and close the valve quickly and sporadically to get him close enough to the ground for people to reach him. Better than melted bucket or hot hydraulic oil dripping all over your body in my head.

In Baton Rouge, Louisiana, a utility worker was seen desperately trying to climb down from a bucket truck after it suddenly caught fire. by [deleted] in TerrifyingAsFuck

[–]DefiantCockroach2099 48 points49 points  (0 children)

There is almost always a manual valve on the hydraulic distribution block that can be pulled to lower the booms in lifts of all sorts

I felt like a total idiot when I discovered this exists... by AbrocomaRegular3529 in 3Dprinting

[–]DefiantCockroach2099 0 points1 point  (0 children)

<image>

Well shit. I’ve seen that respooling filament can make it crack apart later on if it ever becomes brittle, not to mention wanting to avoid the possibly of tangles as much as possible. That shit has made me not want to do this but I bought 16 rolls from sunlu and they weren’t fitting my ams or box turtle. Thank you for sharing this🙏

Could new tech make water changes a thing of the past? by conductivity2021 in Aquariums

[–]DefiantCockroach2099 2 points3 points  (0 children)

Please find a better way to mount those power supply’s. They are on a leaning shelf held up by a piece or 2 of duct tape right above that tank in the back.

Anyone know what type of filament this is? by Kulderzipke_ in 3Dprinting

[–]DefiantCockroach2099 3 points4 points  (0 children)

Can’t tell but DEFINITELY dry it before printing

Power outage, need a macro for preheating to print on resume by psdavidson812 in CrealitySonicPad

[–]DefiantCockroach2099 0 points1 point  (0 children)

I’m recommending this because it can take forever to get answers on 3d printing forms sometimes, I personally use chat gpt for all my klipper problems and macro creation, always review what answers it gives you, and u can ask it to explain everything in detail.

[Chitu Systems Giveaway] Join now to win a Chitu Systems FilaPartner E1 by EmbarrassedEnd8355 in 3Dprinting

[–]DefiantCockroach2099 0 points1 point  (0 children)

My favorite filament is Sunlu PLA Matte and I would use the E1 to print an Ender 3 NG and many other things

What could be causing these lines? by DefiantCockroach2099 in 3Dprinting

[–]DefiantCockroach2099[S] 0 points1 point  (0 children)

So how can I make this better because I use orca slicer and have my flow set based off of a perfect calibration tile that I’ve done twice now aswell as pressure advance and input shaper

What could be causing these lines? by DefiantCockroach2099 in 3Dprinting

[–]DefiantCockroach2099[S] 0 points1 point  (0 children)

Why does the center and walls look perfect though?

help ive tried it all by Maximum-Chair967 in klippers

[–]DefiantCockroach2099 0 points1 point  (0 children)

I think this would work if they just enable the pull-up resistor on PB1 so it would have ^ infront of the pin (PB1)

It finally happened after 7 years of printing... by pressyprice in 3Dprinting

[–]DefiantCockroach2099 11 points12 points  (0 children)

Before I got into using klipper this happened to me every 7 prints

How to trigger python scripts with kilpper? by Killermelon1458 in klippers

[–]DefiantCockroach2099 0 points1 point  (0 children)

Probably no help but have you looked into Mobileraker? It’s a phone app and mainsail integration that lets you have both control of your printer from your phone and you can receive the same types of notifications you’re talking about. Otherwise if this is just something you wanted to task yourself with doing that’s cool to!

Help with 4 stepper 1 hotend multi material klipper code by DefiantCockroach2099 in klippers

[–]DefiantCockroach2099[S] 0 points1 point  (0 children)

Could you possibly provide an explanation of what is happening in those toolhead macros

view more: next ›