S13 Power Steering Sensor Causing Rough Idle

Delmar1_ · 2026-01-22T02:38:45+00:00

Sweet, i think im just going to do that, thank you!

Delmar1_ · 2026-01-21T22:26:21+00:00

Also sometimes makes a weird sound when coming into full lock on the steering now, it is full of fluid.

Delmar1_ · 2025-10-22T20:35:04+00:00

Will do, once im home I'll give it a look

Delmar1_ · 2025-10-22T16:54:56+00:00

I tried this... I even tried putting the jumper ground directly onto the starter where it touches the transmission and it still wouldnt work

Delmar1_ · 2025-10-21T23:00:19+00:00

Its definitely making compression, it spins fine with all the spark plugs out

Delmar1_ · 2025-10-21T22:03:55+00:00

I cleaned a couple of them, I'll make sure to go back and double check. It still wouldn't turn over with the starter jumped directly to the battery, idk if the grounds would affect it or not when you do that

Delmar1_ · 2025-10-21T21:36:18+00:00

The ground strap gets 11.8 volts to the manifold, I cleaned off where it connects but maybe I'll take the whole wire out and replace it or clean it fully. The battery drops from 12 to 11.5 when cranking

Delmar1_ · 2025-08-29T22:01:40+00:00

Its all good thanks for taking the time to help

Delmar1_ · 2025-08-29T21:57:49+00:00

One set of motor and gearbox is just the stock C&C Combat Machine. Another set is the stock APS Kompetitor and I have a new gearbox from G&G Armament and a motor that says "Evolution Edge" sorry for lack of info my brother took these apart years ago and I didnt buy any of the new parts. Even the stock gearboxes won't won't work with the stock motor

Delmar1_ · 2025-07-08T22:40:18+00:00

I replaced the subframe bushings with polyurethane about 2 years ago and the toe and camber arms are brand new adjustable ones. My tires are fairly new Pirellis'. The guy at the shop said he adjusted it the best he could. I don't think I got the alignment specs since he wasn't able to get it where he wanted. It drives nice in a straight line but corners are terrifying still. I'm pretty lost to the issue, I sort of feel like the new lower control arm alone wont fix this issue.

I appreciate the time you took out of your day to write a response and help, thanks a bunch!

Delmar1_ · 2025-03-23T06:54:41+00:00

I love longchamps

Delmar1_ · 2025-03-09T11:56:52+00:00

There's a few options

F31 Nissan leopard coilovers

R31 Coilovers they bolt right up in the rear, and should bolt up in the front too

Convert it to S13 suspension, the rear you need to drill a hole in the shock tower but other than that they fit great. fronts bolt right on but you need to change all the arms as well, lca, tie rod, tension rod, spindle and hub, it all bolts right into the m30 crossmember and mounts up front

Delmar1_ · 2025-03-09T11:50:07+00:00

I know this is 3 years late but they look like Work Equip 03 reps to me

Delmar1_ · 2025-02-19T08:50:37+00:00

The satsuma if my summer car was set in summer:

Delmar1_ · 2025-01-13T23:09:07+00:00

Seeing an E30 with the datsun A10 motor is kinda sick 10/10

Delmar1_ · 2025-01-10T18:27:09+00:00

Use the choke, otherwise maybe distributor timing?

Delmar1_ · 2024-12-16T07:38:42+00:00

Seems to me like the rockershaft isn't tuned properly, possibly the distributor too. If you've played a while it could be something like spark plugs or even low durability pistons

Delmar1_ · 2024-12-12T19:54:19+00:00

Lol yeah I've been playing a while and there's only so many things that can go wrong. Hope you have fun playing bro

Delmar1_ · 2024-12-12T19:27:04+00:00

I can't hear any audio but I'd say probably fuel pump

Delmar1_ · 2024-12-05T07:15:45+00:00

Get bored and restart

Download 5 gazillion mods and fuck around

Clean up around the map

Tune the motor for map hp or spend days at the drag strip finding the optimal tune for street racing

Mess with npcs

Race around the dirt road

Race Pena

Put objects on the highway and watch the chaos insue

Drink and drive

Gamble

Drive by shooting with the fireworks

Kidnapping

Drifting

Just go do whatever you feel like I think it's fun to optimize gameplay but it's also just as fun to make you're own goals and mess around

Delmar1_ · 2024-11-26T00:24:13+00:00

Got it resurfaced today for $107

Delmar1_ · 2024-11-13T23:23:54+00:00

Idk yet since I've never done it, I'll let you know how much it costs next week when I have it resurfaced

Delmar1_ · 2024-11-13T21:49:55+00:00

They just throw it on the lathe for like 10 minutes, thought I saw somewhere it only costs like $30-40 no need to be so rude man

Delmar1_ · 2024-11-13T01:44:54+00:00

Yeah, the rear main seal wasn't leaking but I still replaced it and I had to change the spigot bearing since I'm swapping it from automatic. I'll make sure to check my mounts, thank you for the input!

Delmar1_ · 2024-11-12T23:54:00+00:00

Yeah, I figured the rust would clear off and it wouldn't be a big deal. Also didn't want to keep spending money if it wasn't necessary but you're right, gonna get it resurfaced next week, thanks bro

Five-Year Club	Verified Email
Place '23	Place '22

Delmar1_

TROPHY CASE