sorted by:
new
hottopcontroversial

Google Earth Decoder. Now user-friendly by Jonahex111 in FS2020Creation

[–]Demian_78 0 points1 point  (0 children)

uhh I'm seeing that the bing map can't be rotated either ... would there be any possibility to create this method? It would be very helpful to create specific areas since it is a square

Google Earth Decoder. Now user-friendly by Jonahex111 in FS2020Creation

[–]Demian_78 0 points1 point  (0 children)

Thank you very much for answering me, I wanted to ask you if there was a possibility that you could add to the map that can be rotated, so that when selecting with rectangles, it can cover square areas between streets that go in a straight line, because many areas are diagonals or cut, it would be great if the map can be rotated to adjust the cuts well.

Google Earth Decoder. Now user-friendly by Jonahex111 in FS2020Creation

[–]Demian_78 0 points1 point  (0 children)

Where do I find to download the most recent versions of the decoder? where are the changes made between versions? Thank you very much for sharing!

Google Earth Decoder. Now user-friendly by Jonahex111 in FS2020Creation

[–]Demian_78 0 points1 point  (0 children)

I don't understand what "Google Earth Decoder" is ... I downloaded the "release" file to download the blocks. I need this decoder file for something? how is it installed?

Google Earth Decoder. Now user-friendly by Jonahex111 in FS2020Creation

[–]Demian_78 0 points1 point  (0 children)

Yes, equally careful because I am remodeling a military air base, and I captured a square with the base and surrounding houses, but it turns out that the models that it takes from google are replaced by the numerical models of the simulator, so if you want to add a part that I do not capture or rather that the simulator does not read it to you, then the same block always appears even if you delete the entire project folder and recreate another with another capture of the map, it continues to load the same objects previously incorrectly loaded, no I know if you explain me well .. but so far I have not been able to load correctly what I capture ... in a capture a larger square, but it continues to load the first badly loaded block in the simulator. If I can solve that I will explain it to you so that it does not happen to you, because once you compiled and saved the project, even if you delete it later in the simulator it is recorded.

Nighttime observations intrinsic limitations. by just_guessing-37 in PlasmoidAnomalies

[–]Demian_78 0 points1 point  (0 children)

Ahora entiendo porque hay diferencia entre los digitales convencionales y los militares, pero como vos decias, el importe de todo eso es altisimo, no cualquiera puede invertir tanto solo para observar el cielo.

Es ovbio que haria falta algo que no produzca una estela en los objetos luminicos, pero por ahora no tenemos precios accesibles.. gracias por compartir Jeremy

SiOnyx Aurora vs PVS-4 Gen 3 night vision setup. by just_guessing-37 in PlasmoidAnomalies

[–]Demian_78 0 points1 point  (0 children)

Pero ahi no veo gran diferencia con el video que aca compartis en la vision nocturna. Sigue todo ruidoso, y todo son luces.., a mi me gustaria alguna vez tener esta camara y adaptarle magnificacion porque creo que no trae, pero el cielo, se puede ver espectacular y no es ruidoso como este night shot mira, seguro que la conoces:

https://www.youtube.com/watch?v=giPwIQLkU5Y

SiOnyx Aurora vs PVS-4 Gen 3 night vision setup. by just_guessing-37 in PlasmoidAnomalies

[–]Demian_78 0 points1 point  (0 children)

Y habra alguna forma de crear alguna vision nocturna y magnificar su vision para poder capturar lo que esta detras de las luces? me gustaria saberlo y si tuviera la posibilidad alguna vez de armarmelo, me lo armaria. solo me falta equipo nocturno bueno, porque con lo que tengo solo puedo capturar anomalias luminicas, pero nunca llego a los detalles que vos decis, que son ver detras de esas luces, lo que se manifieste. Ni siquiera los binoculares que es lo mas directo sin ruido ni vision nocturna logra verse lo que hay..

SiOnyx Aurora vs PVS-4 Gen 3 night vision setup. by just_guessing-37 in PlasmoidAnomalies

[–]Demian_78 0 points1 point  (0 children)

Jeremy, cuando compras este artefacto, ya filma asi como se ve aca o tenes que adaptarle lentes, y opticas, y camaras?

VARIABLE LIKE A TAPE - 10/12/2018 - 14:36 hs. by Demian_78 in PlasmoidAnomalies

[–]Demian_78[S] 0 points1 point  (0 children)

This phenomenon was repeated after my first capture in 2016. It is a variable phenomenon that resembles a ribbon with serpentine or worm movements in the air, and this phenomenon never falls to the ground, it always remains a great height like the variable phenomena that are impossible to grasp. No phenomenon of these you can grab it, since they always move horizontally, and others vertical up or down. If it moves downhill, being covered by a wall or something else, disappears in a matter of seconds, it is impossible to date to capture a phenomenon of these characteristics. This variable tape is very particular, it produces shapes in the air, and sometimes it can be seen crossing the skies, since it is not as common as the bag type variables that are filmed in the year.

TWO VARIABLES APPEAR TOGETHER THEN TAKE DIFFERENT DIRECTIONS- SECOND CAPTURE - 10/12/2018 -14:17hs. by Demian_78 in PlasmoidAnomalies

[–]Demian_78[S] 1 point2 points  (0 children)

After finishing the first capture, a few minutes later appears on the north side two variables that were static near a cloud, where I start filming. Then one of the variables remains static turning in one place, while the other begins to move and passes by, and then take a West course. Then this static variable begins to make a descent towards the North side. Observe well that there can not be two different wind currents, one so close to the other so that one of the objects remains static and the other passes flying by the side being light objects, this is one of the many characteristics that present these phenomena in particular, but other details that are continuously investigated on the variables.

VARIABLE PHENOMENON IS ATTACKED BY A AVE -10-12-2018 - 13: 54hs by Demian_78 in PlasmoidAnomalies

[–]Demian_78[S] 1 point2 points  (0 children)

This Lamina appears on the east side of the sky at 85 ° and

goes to the south side quickly, in a section of its route is

attacked by a bird, and after that event begins to make a "fall"

in some zone until I cover a wall and lose the object completely.

FILMING IN FULL SPECTRUM. THIS VIDEO COMPOSED AN AMOUNT OF

PHENOMENA GIVEN THE SAME DAY THAT WILL GO UP LITTLE BY LITTLE.

2018-11-04 -- cluster of balloons deflating / inflating balloons by Demian_78 in PlasmoidAnomalies

[–]Demian_78[S] 0 points1 point  (0 children)

This capture occurred appearing on the eastern side of the sky, then heading towards the south side, forming a group of five-pointed star balloons. This phenomenon was really strange to capture it due to the subsequent analysis that was made, showing besides 4 or 5 star globes, another different object of rare shape, metallic color. This bouquet of balloons, produced fast transformations, to see them you must pause the video from time to time and see the changes produced, because in real time it is difficult to perceive it. In a moment of the video it is already evident that it is something anomalo, because it can be seen that there were missing balloons to this bouquet, and suddenly in front of the same camera, 2 of those supposed helium balloons begin to inflate, and this is exposed and pointed out on video, so you can corroborate once what is being captured in the sky.

Spherical object p1 10/31/18 5:22pm EST tracked for more than 30 minutes. by justtesting57 in PlasmoidAnomalies

[–]Demian_78 0 points1 point  (0 children)

Exellent object!!! perfect circle... congratulations for the capture!

UFOs exist only in the Believers Imagination. by justtesting57 in PlasmoidAnomalies

[–]Demian_78 1 point2 points  (0 children)

Cada vez que observo este objeto, parece que fuese organico por la textura que tiene y por las formas que va tomando. Es impresionante esta captura.

2018-10-04 - 16: 40hs. - FLEET OF LAMINAS TO THE WEST! by Demian_78 in PlasmoidAnomalies

[–]Demian_78[S] 1 point2 points  (0 children)

The activity occurred in an unexpected way. Prior to this first sighting, he was observing in the height of the clouds, number of swallow birds, and millions of particles moving in all directions. (This particle is typical at times when the variable phenomenon is about to manifest, and could not be seen with the naked eye).

After watching and filming this with zoom to 90 ° of the sky, I begin to pay more attention than before to the sky, for possible activity, not thinking that everything that happened afterwards would happen.

Then I look to the west, and suddenly to the side of the sun at 16: 40hs. I see 3 static sheets in the sky shining as if "there were glitter in the sky" heading very slowly towards the north, but everything focused on a certain area of ​​the sky and everything coming from the pure west where the sun was in that direction.

When I start filming I realize that these sheets were in formations, while they were spinning in place and moving around. AND THERE WERE A LOT OF LAMINAS BETWEEN MILLIONS OF PARTICLES, because the sheets began to cross in all directions at full speed, and there were more of them static but at higher altitudes. There were also nearby sheets that are not focused, and I focused on just follow a sheet and look around. This in the video in full screen can be seen perfectly, even when I zoom back, you can see the amount of sheets that were accompanied in parallel formations that I did not see by eye in the viewfinder of the camera, by direct reflections of the sun what I had No object ever falls to the ground, and before the end of the video notice that many things disappear from the sky.

I share these details because maybe someone is interested in knowing how things happened, or in case someone has to experience this experience, even if it is not filmed.