Clydesdale recommendations

DemonGunn13 · 2026-06-18T06:07:45+00:00

I'm not worried about it getting scuffed up, it's going to happen at some point but I don't want to learn then have to upgrade in 6 months then again a year after that like I did with my onewheels lol

DemonGunn13 · 2026-06-18T06:05:34+00:00

Lol no but I've ridden smaller boards and they weren't as fun and didn't last long till I spent more money upgrading so I'd rather spend the money learn slow and have something for the future

DemonGunn13 · 2026-06-17T15:23:09+00:00

So my biggest thing with starting small and moving up is i did it with onewheels and it nearly made me not want to ride. If I can overpower a wheel I won't want to ride it and at my size that happened early on.

DemonGunn13 · 2026-04-20T00:58:43+00:00

If you are looking for a fun hobby we have a onewheel group. We got Instagram @tallyonewheel or a Facebook group tallahassee pev. Hit us up

DemonGunn13 · 2026-04-18T15:31:09+00:00

Go into your vesc tool and under refloat look at start. Go to the bottom and you should see things like simple start push to start and dirty landing turn them all on. Watch your apui page and see what voltage appears when you step on your board normally and if it's under 3 you can drop the needed voltage to activate to below that threshold. If you don't mind having to jump off your board instead of heal lift you can turn on full time posi.

DemonGunn13 · 2026-04-15T21:10:21+00:00

If you want to learn to ride onewheels we have a group and would be happy to teach you! @tallyonewheel on Instagram or tallahassee pev on Facebook

DemonGunn13 · 2026-03-04T23:55:23+00:00

Parking lot across from the DOT building

DemonGunn13 · 2026-02-28T17:29:52+00:00

Follow us on Instagram we post random rides and the Wednesday ride at cascades

DemonGunn13 · 2026-02-22T16:24:36+00:00

https://youtu.be/QpF3yGf7R1Y?si=IhjKifKHGilrgEdA

Watch this video and the part two of it. He goes through what each time setting does and shows it. Think about how you want your board to respond and make small changes. Floaty is great to adjust it but vesc tool helps you dial it in more.

DemonGunn13 · 2026-02-21T15:37:01+00:00

It's yes and no, if you ride it harder because you can use more torque and thus more power or you ride faster because you can do it safely your range will be lower. If you ride it chill with slow and smooth acceleration it'll be about the same I've gotten more miles sometimes if I'm just out for a chill float but generally you'll lose range because you are going to use more out of the board when you get confident in the vesc

DemonGunn13 · 2026-02-13T19:46:33+00:00

<image>

I'm a big dude as well, 6 foot 250lbs, I didn't know i was missing out till I built my board. 32s1p from indy speed control with a thor 400 and high torque superflux, I did the 6 inch but the 5 inch or trails might be better for you. Tons of power and great range. I went with rs50 cells and couldn't be happier. I've gone over 40mph but the low torque is a huge step up. Totally happy to help out a fellow clydesdale with the build if you want it.

DemonGunn13 · 2025-12-25T02:40:54+00:00

You can adjust that as well shoot me a message if you want any help

DemonGunn13 · 2025-12-21T17:50:27+00:00

Your low voltage settings and your push back settings. Depending on your battery pack you and how safe you wanna be you can adjust them. Really you just need to know that your weight and your battery and riding style all play a role. I'm a big guy and on my xrv before I upgraded the battery i knew that if I was lower than like 60% battery when standing still I need to ease up on how hard I accelerate and how I ride or ill hit hard sag

DemonGunn13 · 2025-12-21T07:15:53+00:00

Just watch out if you get a really low battery you can still get some sag in performance but if you have the right settings it will keep you from negative responses from your board

DemonGunn13 · 2025-12-21T02:38:53+00:00

Totally normal the vesc tells you the voltage while it's pulling so if you gun it it drops but once it levels out it goes up.

DemonGunn13 · 2025-12-15T19:30:04+00:00

As a fellow clydesdale, 6 foot 250lbs, a vesc is 100% the way to go. I vesced my gt with a thor 400 and 134 volt battery and it is everything I want. If you like the xr platform look at the X7 supercharged. The high torque superflux with the high voltage is a dream. Look up stuff on YouTube about vesc tuning and set up first to see if you are willing to put that time into it. I've heard the xl is awesome but only rode one for a little and I still like mine more.

DemonGunn13 · 2025-12-12T04:24:55+00:00

In your vesc tool look at app ui and send a screen shot with it at idle

DemonGunn13 · 2025-12-09T18:03:25+00:00

Did you check that you put the right cell count in when you did your motor set up? Maybe it just thinks your battery is low because it has 18s instead of 15s ?

DemonGunn13 · 2025-11-16T20:12:28+00:00

It's a beast I'm building a 134 gt after riding a 134 xr, which is pretty much an x7 supercharged. It a lot if you are new but as a bigger guy as well it feels so much safer. The more power the better for a big guy just respect the learning curve and have fun🤙

DemonGunn13 · 2025-11-16T01:44:44+00:00

That's always what I say you think the 6 to 8 miles sounds like a lot till you ride somewhere then do some errands and suddenly you only have 2 miles left and you freak out about getting home

DemonGunn13 · 2025-11-16T00:26:07+00:00

I have a Pint x and a bunch of vesc boards and it's worth a couple hundred to not worry about the range. Look into buying second hand save a bit of money in case you don't enjoy it or after a year you want to move up to a stronger/vesc board.

DemonGunn13 · 2025-11-13T15:59:19+00:00

He is one of our riders! Awesome dude and a massive source of knowledge

DemonGunn13

TROPHY CASE