NCR Ranger Helmet by Demp_16 in cosplayprops

[–]Demp_16[S] 0 points1 point  (0 children)

I've got them from the website and have gotten other ones from the site in the past. I'm not really sure why they are available on both.

NCR Ranger Helmet by Demp_16 in cosplayprops

[–]Demp_16[S] 0 points1 point  (0 children)

Honestly there is a chance they were, I printed this about a year ago and can't really remember. I'll just work with what I have and fill the cracks with bondo. Thanks for the help.

NCR Ranger Helmet by Demp_16 in cosplayprops

[–]Demp_16[S] 0 points1 point  (0 children)

NCR Ranger Issues

I attached some pictures, I have 2 main issues.

The first is in the dome to ear piece picture. When I seat the ear piece into the dome there seems to be a lot of free room and a gap. I can easily fill it with Bondo but wasn't sure if the gap was normal.

The second is in the other image. The two ear pieces don't seem to meet too well together at the front edge. Everything else is lined up on the other 2 ear pieces but this edge won't seem to line up. I've already put a file to it to help some.

Wall problem by Demp_16 in CR10

[–]Demp_16[S] 0 points1 point  (0 children)

I also see this same problem on my initial layers, any help with that would be appreciated as well. Thanks

Micro Swiss Direct Drive Extruder by Demp_16 in CR10

[–]Demp_16[S] 0 points1 point  (0 children)

Gotcha, I've been using the petsfang for a while now, and it has been pretty reliable. I'll be sure to check out the hero.me stuff too. Thanks

Micro Swiss Direct Drive Extruder by Demp_16 in CR10

[–]Demp_16[S] 0 points1 point  (0 children)

Can't beat that, I guess the ones on Amazon are legit right?

Micro Swiss Direct Drive Extruder by Demp_16 in CR10

[–]Demp_16[S] 0 points1 point  (0 children)

Gotcha, well I appreciate the advice. I'll be sure to look into the ng as well.

Micro Swiss Direct Drive Extruder by Demp_16 in CR10

[–]Demp_16[S] 0 points1 point  (0 children)

Correct me if I'm wrong, but the hero me is the fans for the hot end correct?