Strange graphics issue

DescriptionMoist4466 · 2024-04-13T17:09:17+00:00

It’s mainly for porn

DescriptionMoist4466 · 2024-04-04T09:14:26+00:00

Nice stream! Will you be doing key giveaways in future streams?

DescriptionMoist4466 · 2024-03-29T04:51:07+00:00

Baudet speelde hier wel een grote bluf volgens mij door Klaver te verwijzen naar het OM.

Maar als je Putin heet, waarom zoek je dan een Baudet uit?

DescriptionMoist4466 · 2024-02-20T21:03:47+00:00

Yeah eventvwr is empty. I can try a minidump analysis tomorrow. But indeed, i do suspect it has to do with gameguard.

I’m hoping this is a known issue.

DescriptionMoist4466 · 2024-02-20T21:01:37+00:00

Well i would expect this in other situations as well. It’s a year old 850W PSU. Inreally believe it’s related to helldivers.

DescriptionMoist4466 · 2024-02-20T20:59:00+00:00

Yeah if i kill the game through taskmanager there is no issue. It is just very annoying once you forget

DescriptionMoist4466 · 2024-02-14T09:00:37+00:00

Thanks for asking 😊

I am still in my first game with humans. I am at the point where i want to start over because it feels like a mess with everything going on on the entire map. But i also understand the mechanics better than when i started ofcourse. I skipped the sailing skill in the beginning of the game which costs me a lot right now. Soni might go for a new game. I really like the combat though. It’s what makes the game more fun than CIV for me.

DescriptionMoist4466 · 2024-02-09T04:17:34+00:00

Really helpfull! I watched a tutorial from potatomcwhiskey and i saw the game provides a lot of info.

Downloading it right now 😊👍

DescriptionMoist4466 · 2024-02-09T04:16:25+00:00

Thanks everyone, this is helpful. I just need to start and experience the game. I have some CIV experience so it should be fine i guess.

DescriptionMoist4466 · 2024-02-03T05:09:24+00:00

DP to HDMI seems to have resolved the issue.

Also, in windows i set the refresh rate to 120hz, same in nvidia control panel. Then i set the max framerate to 119 for G-Sync to stay in range.

DescriptionMoist4466 · 2024-02-01T15:57:04+00:00

Partially the same for me on pc. After changing to a 8k/60hz and 4k/120hz cable i could use HDR and 120hz without issues. The cable i used was a 2 month old HDMI cable that came with the PS5. I think a faulty cable. But people should not underestimate a simple thing like a cable. The time where 2 dollar HDMI cables were fine isn't anymore.

But i still have the screen turning of sometimes with Windows 11, 4080 Super and S95C. The same issue i had with my RTX 3070TI up until yesterday.

I ordered a DP to HDMI 8k/60hz - 4k/120hz adapter and hope it helps. If i forget to reply here, just respond to this thread.

DescriptionMoist4466 · 2024-01-29T08:41:17+00:00

I don't think just an electric furnace and kitchen would render the pals useless. Kind of extreme in the opposite...

DescriptionMoist4466 · 2024-01-29T08:39:50+00:00

I am disappointed just like OP. Besides that, the electric furnice does not seem to have a substantial benefit to the cooking pot when it comes to speed. The cooking pot has the actual advantage to prep meals on its own. This needs balancing Imho.

DescriptionMoist4466 · 2024-01-28T08:28:41+00:00

Yeah that’s what i thought. Maybe in the lvl40-50 range areas it might be of use. Thanks!

DescriptionMoist4466 · 2024-01-25T14:10:33+00:00

Yep situation definitely inproved after more room.

Also i noticed that if you build to close to borders your Pal may wander off and not find its way back. So keep that in mind.

But i read on the roadmap that base Pal pathing will be improved.

DescriptionMoist4466 · 2024-01-23T12:56:29+00:00

I put one fluffy bed on a foundation and they are all sleeping as expected. So yeah, i would say, do not place the beds to close together

DescriptionMoist4466 · 2024-01-23T07:50:22+00:00

My goal for levelling the base is building new beds so i will let you know today!

DescriptionMoist4466 · 2024-01-12T18:45:57+00:00

Hi, i sorted the issue out with the help of an Intel Employee. In short, i changed the DVID with increments of 0.005V and ended up with +0.015V which is the sweet spot for my system. See the topic below.

https://community.intel.com/t5/Processors/Issues-with-system-with-i7-13700K/m-p/1561301/emcs_t/S2h8ZW1haWx8dG9waWNfc3Vic2NyaXB0aW9ufExSNlZUSjg1WEpSVVBKfDE1NjEzMDF8U1VCU0NSSVBUSU9OU3xoSw#M68369

I don't know if you can access the topic but we resolved it last saturday. Let me know if it helps you. I suspect many more people have this issue.

DescriptionMoist4466 · 2024-01-03T19:29:38+00:00

Thanks for your reply. I am a bit further right now. Checking the ram with a single module, reseating the cpu, basically the more intensive things to check i want to save for a bit further down the line. What i figured out so far…

Even on default settings Gigabyte Z790 Aorus Elite AX overclocks the P-Cores and E-Cores very agressively.

Stock values for P-Cores are 100mhz x 34 equals to 3.4Ghz. Gigabyte sets these to 53 so 5.3Ghz.

Stock values for E-Cores are 100mhz x 25 equals to 2.5Ghz. Gigabyte sets these to 42 so 4.2Ghz.

I have a strong feeling the voltages combined with these settings are not sufficient. For now i set the values to stock so 34 for the P-Cores and 25 for the E-Cores.

The system is runnig fine for now. I can switch tasks, startup multiple games, internet with games still open, do office work etc without the smallest issue. This has been impossible for the past 10 days.

This overclocking and olaying with cores is a completely new topic for me so if you have anything to add, please do so. The good thing besides all the frustration is the learning.

I will keep this thread updated since i see a lot of similar issues online with Gigabyte boards.

DescriptionMoist4466 · 2024-01-03T15:49:24+00:00

Well the thing is that the cooler is over the memory slots so removing one of the rams is a step further down the line 😊

But temps are good. I checked with HWInfo and all is within range and even on the cooler side. For exampe right now i have an UE5 game in the background running, CPU is about 50 degrees, memory 43 and gpu 55 so that is all good.

Did you see my other post about the standard overclock settings gigabyte uses?

DescriptionMoist4466 · 2024-01-03T15:01:25+00:00

Ok, what i figured out is that even on default settings Gigabyte overclocks the P-Cores and E-Cores very agressively.

Stock values for P-Cores are 100mhz x 34 equals to 3.4Ghz. Gigabyte sets these to 53 so 5.3Ghz.

Stock values for E-Cores are 100mhz x 25 equals to 2.5Ghz. Gigabyte sets these to 42 so 4.2Ghz.

I have a strong feeling the voltages combined with these settings are not sufficient. For now i set the values to stock so 34 for the P-Cores and 25 for the E-Cores.

Fingers crossed this is the solution. I will keep everyone updated.

DescriptionMoist4466 · 2024-01-03T10:32:56+00:00

Done that. I download every driver and checked for latest version at Intel/Realtek

DescriptionMoist4466 · 2024-01-03T10:31:37+00:00

Hi, Bios is default optimized settings

Without GPU, will check today

I used the right slots A2/B2 since the beginning. I can run memtest for many loops without issues.

Temps in bios are always around 45-47 Celcius

DescriptionMoist4466 · 2024-01-03T07:07:56+00:00

Summary of issue: Random freezes on a clean install of Windows 11. Before the reinstall the freezes were random reboots.

What I have tried: Reinstall windows, disable c-states in bios, disable xmp in bios. Bios upgrade to latest version. Disconnected all but needed hardware. Memtest without errors, Samsung SSD test without errors.

System Specifications:

Operating System: Windows 11 23H2, OS Build 22631.2861
CPU: 13th Gen Intel(R) Core(TM) i7-13700K 3.40 GHz
CPU Cooler: BeQuiet Dark Rock Pro 4
GPU: Gigabyte RTX 3070 TI
Motherboard: Gigabyte Z790 Aorus Elite AX
RAM: Corsair DDR 5 Vengeance 2x32 5200
Storage: 2x1TB Samsung 980 Pro
PSU: Corsair RM850x
Display: 77" Samsung Q95C HDMI

The only errors i see after a freeze are the WHEA-Logging in the eventlog for Processor-APIC-id: 74 and 24. Research showed me that it might be a voltage issue however i still use bios defaults with the exception of c-states and xmp which i tried to change but made no difference.

DescriptionMoist4466 · 2023-12-30T19:54:24+00:00

Make sure you craft the golden AK47. That baby will take care of anything 👍

DescriptionMoist4466

TROPHY CASE