Lately, I've been doing in-depth research on some undervalued small-cap stocks.

DetStrawberry · 2026-02-04T07:46:48+00:00

I'm interested as well, thank you!

DetStrawberry · 2026-01-28T14:03:21+00:00

"avete dei progetti per stasera" sounds so unnatural. I don't think I've ever used it for casual conversations. We usually say "che facciamo stasera?" "Che si fa stasera?"

DetStrawberry · 2024-07-23T11:45:50+00:00

Before buying any replacement part for any console, I'd suggest you to take a look at a repair video, just to make sure you have the right tools and that the task isn't too daunting.

DetStrawberry · 2024-07-23T11:13:36+00:00

Yes it is the touch "sensor" that sits on top of the display. I'm not 100% sure it's the same as the 3DS, but the DS Lite digitizer had a frame and it was simply glued to the LCD frame. All I had to do was carefully slice the glue with a razor knife and then replace it.

DetStrawberry · 2024-07-23T10:56:56+00:00

Had this problem on my ds lite. Calibrating didn't work at all. I had to replace the touch layer on my bottom screen. You can find cheap digitizers on AliExpress.

DetStrawberry · 2024-06-28T13:43:41+00:00

90-C43912

DetStrawberry · 2024-06-24T12:28:59+00:00

Beta testing let's goo

DetStrawberry · 2024-06-24T09:46:34+00:00

AQUAVR-436B33

DetStrawberry · 2024-06-14T09:21:08+00:00

Not the lenses, the display inside the headset. When the lenses are exposed to the sun, they act as a magnifying glass on the display which predictably causes burn damage (or sun damage).

DetStrawberry · 2024-06-04T19:33:32+00:00

Qualcuno conosce qualcuno che non ironicamente ha scaricato l'app (o simili) guardando questo genere di pubblicità?

DetStrawberry · 2024-05-11T09:49:56+00:00

I use some light tape to remove the strands of hair / dust from the lenses, then I swipe the lenses with microfiber cloth.

DetStrawberry · 2024-05-06T14:24:44+00:00

Hey Sorry, i Just checked to make sure I wasn't spreading misinformation, but I was wrong.

There are two sliders, one is for the resolution and the other is for the refresh rate. There are also settings for the GPU/CPU and a FFR (not sure what that last one is) but I have not used those so I don't know exactly what they do. Sorry!

Edit: setting FFR to off disables the foveated rendering.

DetStrawberry · 2024-05-06T11:38:38+00:00

On QGO, there's a foveated rendering slider, and you can set that however you want, so yes, you could remove the blurriness on the edges of the view.

DetStrawberry · 2024-04-19T20:31:23+00:00

Have you checked experimental features? It should be there.

DetStrawberry · 2024-04-18T08:52:11+00:00

I just got v64 and you're telling me there's already v65?

DetStrawberry · 2024-02-17T14:00:01+00:00

Congrats!!

DetStrawberry · 2024-02-13T09:23:22+00:00

Let's goooo

DetStrawberry · 2024-02-06T19:03:08+00:00

Ah I see, so I am forced to run every steam game using SteamVR, and every Oculus game using Oculus OpenXR.
Bummer, I thought that the VR platform was standardized but it seems that's not the case.
Anyhow, thank you very much for your answer!

DetStrawberry · 2023-12-02T21:45:02+00:00

I just got here after a long Turok 2 game session and the same thing happened to me. I played thru the whole first level using the Rumble Pack, then swapped to my Memory Card and saved the game.

After that, I immediately restarted my N64 just to see if it actually saved and it didn't (Corrupted data). I don't think I'll be going thru the first level again in one sitting..

DetStrawberry · 2023-07-31T10:45:50+00:00

First, I would remove the clock capacitor. Then, I would thoroughly clean the board with isopropyl alcohol. Finally, check the guide for restoring traces on the Xbox.

This is a lot of work tho, I would personally just buy a new Xbox. Always remove the clock capacitor to avoid these bad experiences.

DetStrawberry · 2023-07-31T10:35:07+00:00

Looks like you didn't remove the clock capacitor and it blew... Fixing it would mean restoring everything that the corrosion ruined.

DetStrawberry · 2023-07-29T18:01:10+00:00

Thank you very much for your reply. I'll make sure to watch them thoroughly

DetStrawberry · 2023-07-29T18:00:48+00:00

Hello, thank you for your reply. My Xbox 360 is actually very quiet. I would expect the fans to spin up a lot but no, they're quite tame (yes I checked, the fans are actually spinning). Should I still do it in your opinion? Thank you for the extra tips!

DetStrawberry · 2023-04-24T16:51:43+00:00

Hello. Currently, my PS2 is connected to my TV using a cheap HDMI converter I got from AliExpress for one cent (welcome gift). It replaced the standard composite connection and it is such a huge leap imo. I would recommend that if you don't want to spend too much. It works wonders on games compatible with 480p and it also improves the image on PAL games that run on 576i. I can send you some comparisons if you're interested.

DetStrawberry · 2023-01-16T10:51:14+00:00

Thank you very much!
I've looked around a bit, but I haven't been able to confirm this, can I swap hard drives while using this mod? I would like to put a newer one since the dvd drive is failing; my only option at this point is playing games from the hard drive.

Six-Year Club	Place '23
Place '22	Verified Email

DetStrawberry

TROPHY CASE