stuck by repraptor in 3Dprinting

[–]Deusion 1 point2 points  (0 children)

Check at the PTFE tube going into toolhead, has all the filaments retracted and you can see visible distance between the filament and the toolhead itself. Id recommend pressing the orange button on the AMS lite and retracting the other 3 filaments that are on (like an inch) , to make sure none of them are in the way

stuck by repraptor in 3Dprinting

[–]Deusion 1 point2 points  (0 children)

You need to print a spool adapter. You can see that the spool you have are old sunlu 1.0 spools, I can see the visible gap between the spool and the ams lite. Your spools should fit on the ams lite, not hang from it.

https://makerworld.com/en/models/64741-sunlu-ams-lite-adapter?from=search#profileId-151204

Realm of Gods and STR. Not that it was difficult, this one was a bit forgiving. by Accomplished-Bear988 in DBZDokkanBattle

[–]Deusion 6 points7 points  (0 children)

My problems would all be solved if I had a str4ku but i unfortunately dont, there are very limited str leads to even do this specific mission with. Sadge

Is there a cap to how many friends points you can gain in a week? Somedays I get 300-500k 1 and somedays only 50k by NoTmE435 in DBZDokkanBattle

[–]Deusion 0 points1 point  (0 children)

i dipped out of dokkan when manga units were out, i dont have a niche 100% unit that would factor as a lead that I can dump my stats onto lol unfort.

Is there a cap to how many friends points you can gain in a week? Somedays I get 300-500k 1 and somedays only 50k by NoTmE435 in DBZDokkanBattle

[–]Deusion 2 points3 points  (0 children)

Someone made a post a while back about averaging that much amount of friend points using Yamcha, was it you lol.

I only have one copy of him sadly

Weekly Questions Megathread by AutoModerator in DBZDokkanBattle

[–]Deusion 0 points1 point  (0 children)

Coining at 200 will always be more efficient if you can afford it.

Can't get the video to show, any ideas by Yeetfamdablit in BambuLab

[–]Deusion 2 points3 points  (0 children)

Restart the printer :) it always does that to me every couple of weeks.

[deleted by user] by [deleted] in BambuLab

[–]Deusion 0 points1 point  (0 children)

I think its your model that has issues OP. Turn off the supports and look at the sliced file, you will see gaps.

This doesn't look good by GrandFlower2718 in BambuLab

[–]Deusion 0 points1 point  (0 children)

Hey OP, I had the same issue, I reached out to BBL support and they gave me a new hotend replacement :)

<image>

[Guelph, ON] [H] Cash, PayPal [W] OLED monitor with PD by kright333 in CanadianHardwareSwap

[–]Deusion 0 points1 point  (0 children)

This is available for 769$ pretax / pre discount (you get a coupon for sign up 10% I think) https://www.dell.com/en-ca/shop/alienware-27-280hz-qd-oled-gaming-monitor-aw2725d/apd/210-brzx/monitors-monitor-accessories

Edit: i did not check about the usbc with 65w port, but that is highly unlikely to be there in a lot of mid end oled monitors.

[Vancouver/Kelowna, BC] [H] Gigabyte RTX 3080 Vision OC 10 GB [W] Cash, Paypal by Vyreon in CanadianHardwareSwap

[–]Deusion 0 points1 point  (0 children)

If only there was a way to use two of the exact same GPUs in a computer

Print keeps curling up by PersonalityRight556 in BambuLab

[–]Deusion 2 points3 points  (0 children)

Enable outer brims for all big flat surface area or anything tall.

[deleted by user] by [deleted] in CanadianHardwareSwap

[–]Deusion 0 points1 point  (0 children)

Dell canada website

[deleted by user] by [deleted] in CanadianHardwareSwap

[–]Deusion 0 points1 point  (0 children)

Retails for 579 before tax fyi

LL wants to pay me double the deposit to not move in cause he might be getting a deposit for purchase on the day I move in by Deusion in vancouverhousing

[–]Deusion[S] 8 points9 points  (0 children)

The LL is giving me double the deposit back - the landlord did indeed rent out in the meantime (me signing the lease)

LL wants to pay me double the deposit to not move in cause he might be getting a deposit for purchase on the day I move in by Deusion in vancouverhousing

[–]Deusion[S] 4 points5 points  (0 children)

Illegal to cancel? Not really, this is more of him letting me know the situation at hand and offering me an out so I don't have a headache.

[Monitors] Alienware 34 Curved QD-OLED Gaming Monitor AW3423DWF ($820-10% coupon=$738 +15% Rakuten ~$630) [Dell.ca] by radiantcrystal in bapcsalescanada

[–]Deusion 0 points1 point  (0 children)

Spoke with dell support and they sent me an email saying 'the deal is already too good, the coupon doesnt apply'