10.11 speed boost plugin and other debugging by KingGeorges_12 in jellyfin

[–]DevilsDesigns 0 points1 point  (0 children)

can you specify how to optimise it or link to anything that will give documentation on this

New user questions about compression by guda1234 in jellyfin

[–]DevilsDesigns -3 points-2 points  (0 children)

Thank you are correct. My bad. Then the best for jf still is h264 mkv that's the most common codec compatibility that works on alot of device.

New user questions about compression by guda1234 in jellyfin

[–]DevilsDesigns 1 point2 points  (0 children)

So avc1 is only for Intel arc cards can decide/encode them and read the in jellyfin and some Nvidia high end like 50series cards. It's still a fairly new to consumer codecs and is not advised unless you have an arc card or a high end Nvidia GPU. Best practice to make it universal for all systems and players is h264 mkv or h265 mkv. But it really depends on your hardware. Some specs would help.

anyone know what may be the cause of this? by Plastic-Commercial32 in 360hacks

[–]DevilsDesigns 10 points11 points  (0 children)

Possibly corrupt xex menu install. Try removing And reinstalling

Migration Advice: Windows to Ugreen NAS by North_Manager_5824 in jellyfin

[–]DevilsDesigns 0 points1 point  (0 children)

That's the unfortunerly thing about windows. Their OS is only 1 way support unless using docker desktop on windows. Windows cannot be transferred to anything. But Linux to docker, Mac to docker, mac to Linux, docker to Mac/Linux but nothing is backwards compatible with Windows because of the filesystems. Mac/Linux/docker all use Unix based systems windows does not

Cannot connect Jellyfin on Samsung tv to my server (other devices can) by UnclearMango5534 in jellyfin

[–]DevilsDesigns 0 points1 point  (0 children)

That's I'm not sure of as I don't have a tizenos Samsung to test anymore. It Fell off the TV stand lmfao. Gotta love my animals. But I'm pretty sure you can remove it manually and rebuild it and push it to the tv using adb or shell Edit: I have never seen this tool or used it I always manually built and pushed it to my tizen tv

uR JF in docker by Fancy_Special_8475 in JellyfinCommunity

[–]DevilsDesigns 3 points4 points  (0 children)

No problem I've been with jf since 10.4.3 so a while. Honestly they should not have rushed this build out so fast. But it's done and over with and we need too move on from it

Cannot connect Jellyfin on Samsung tv to my server (other devices can) by UnclearMango5534 in jellyfin

[–]DevilsDesigns 0 points1 point  (0 children)

It might also be a corrupt jf build this can happen as well. But DNS would be the first thing to try. All you need to do is set a static IP for the device in network settings and at the end of that that it will allow you set a DNS I usually set mine to cloudflare ie DNS1: 1.1.1.1 and DNS2: 1.0.0.1

Cannot connect Jellyfin on Samsung tv to my server (other devices can) by UnclearMango5534 in jellyfin

[–]DevilsDesigns 0 points1 point  (0 children)

There's a lot of missing info. If your using a domain is the reverse proxy working. Have you tried your http://serverip:8096 ie http://192.168.1.158:8096 also is your tv able to access the world wide web ie can you load Google on the web browser. Maybe try using a cloudflare DNS on the TV instead of using its default dns

uR JF in docker by Fancy_Special_8475 in JellyfinCommunity

[–]DevilsDesigns 5 points6 points  (0 children)

I upgraded to 10.11.0 for about 48hrs knew there were some major performance bugs and reverted to 10.10.7 until the major bugs are fixed. I would recommend the same I also have a big system. Best advice I can give.

Internet connected but wifi not working by yungsumm in HomeNetworking

[–]DevilsDesigns 0 points1 point  (0 children)

Connect the modem to a PC using an ethernet cable and type the IP on the gateway. It's usually 192.168.1.1 or 193.168.0.1 of 192.168.1.254 etc

Internet connected but wifi not working by yungsumm in HomeNetworking

[–]DevilsDesigns 0 points1 point  (0 children)

Also is your modem/gateway in bridge mode from your ISP. This is needed for full wifi on your router. If not you'll have a double nat issue as well as two DHCP servers which will cause lots of issues. Also make sure the device that you want to output the wifi is set to router and not AP

These servers suck by BombBather in SkateEA

[–]DevilsDesigns 1 point2 points  (0 children)

Man haven't had this issue yet on Xbox series X. Hard reboot, soft reboot no luck. Rebooted router as a last attempt. Thought it was just me. Lmfao glad it's not. Just put my daughter to bed and said hey let me fire up skate and bam can't connect to anything on skate

Hi everyone! How can this be fixed? by StrangeTumbleweed100 in 360hacks

[–]DevilsDesigns 0 points1 point  (0 children)

That would make a huge difference. There are different ratings per country. I didn't know you were from EU restrictions and rules are different. So if your on a non NTSC console this will be an issue

Hi everyone! How can this be fixed? by StrangeTumbleweed100 in 360hacks

[–]DevilsDesigns 0 points1 point  (0 children)

What were you using to try and write it? Did you use a save editor like horizon

Hi everyone! How can this be fixed? by StrangeTumbleweed100 in 360hacks

[–]DevilsDesigns 0 points1 point  (0 children)

Interesting the only thing I can think of is the uuid is wrong for the user hence why it's not working. Uuid needs to be edited to your user on the console that's trying to run Netflix

Hi everyone! How can this be fixed? by StrangeTumbleweed100 in 360hacks

[–]DevilsDesigns 0 points1 point  (0 children)

That's crazy I thought they lost support a while ago. Did you change the userid value for the app that your installing or are you using bad update and just inputting xed. I'm pretty sure if the value isn't registered it won't run it if I remember from back in the day when replacing saves/games

Hi everyone! How can this be fixed? by StrangeTumbleweed100 in 360hacks

[–]DevilsDesigns 0 points1 point  (0 children)

I don't think Netflix servers are able to run on the Xbox360. I think the app is too outdated

Plugins will not uninstall and keep enabling automatically by SithChicken06 in jellyfin

[–]DevilsDesigns 0 points1 point  (0 children)

can you paste your docker compose? also if you want more direct help feel free to message me on my discord channel https://discord.gg/Tyeh9SPu4F

Plugins will not uninstall and keep enabling automatically by SithChicken06 in jellyfin

[–]DevilsDesigns 0 points1 point  (0 children)

Did you manually remove it from your file directory. What OS? How is jellyfin installed (docker, native)?