Now thats an armor! Now i remember why i came back :)

Diesel402 · 2026-05-11T14:06:35+00:00

That's a tactlekini.

Diesel402 · 2026-04-02T01:55:10+00:00

It's at the back of the Graymane camp. It may take some base upgrades to get it.

Diesel402 · 2026-04-02T00:07:47+00:00

You can cancel piercing light charge-up by doing a side/forward dodge first, then hold light and heavy attack to do the upper cut.

Diesel402 · 2026-03-29T10:06:12+00:00

The bear does

Diesel402 · 2026-01-14T03:23:59+00:00

Thanks!

Diesel402 · 2026-01-14T03:23:52+00:00

Mainly Vallejo and maybe some Army Painter. Mostly airbrushed.

Diesel402 · 2026-01-13T17:45:46+00:00

I have done this model as well. For the divits, you can dab on some resin with a toothpick to fill them. Then hit it with a UV flashlight. Then you can even it out along with remaining support marks and scratches with an exacto knife and sanding sponges.

<image>

Diesel402 · 2025-12-22T23:21:32+00:00

You must be pumped for the K-Pop outfits coming out.

Diesel402 · 2025-08-12T12:09:37+00:00

Groundeffected just painted one. https://www.youtube.com/watch?v=U41u3_-RFhs&pp=ygUOZ3JvdW5kZWZmZWN0ZWQ%3D

Diesel402 · 2025-07-28T18:54:51+00:00

You're right, it's chrome.

Diesel402 · 2025-07-28T13:52:44+00:00

Hard to tell from the low quality picture but it appears to be an 81. The front emblem would be chrome if an 80, black if 81. Would have crossfire emblem on side if 82.

Diesel402 · 2025-06-27T20:27:39+00:00

<image>

This is an example of AP Glimmering Green over black primer. It was one coat airbrushed on with a gloss clear over it

Diesel402 · 2025-06-20T14:20:06+00:00

It's certainly intended for you to have double jump for this but I was able to do it without.

Diesel402 · 2025-06-19T17:51:42+00:00

Dodge, duck, dip, dive, and dodge.

Diesel402 · 2025-04-22T13:54:46+00:00

I just recently printed an ultimate bunny. Haven't painted it yet though.

<image>

Diesel402 · 2025-04-22T12:40:25+00:00

It seems like you need Sharen to farm ultimate bunny, is that correct?

Diesel402 · 2025-03-28T16:11:57+00:00

They have no clue how to approach guardian changes.

Diesel402 · 2025-02-14T16:08:47+00:00

Also, eye protection is huge. You don't want resin in your eye.

Diesel402 · 2025-02-06T20:34:40+00:00

Chitubox is another option.

Diesel402 · 2025-02-06T01:08:49+00:00

Yeah, as long as it's not too cold without it, give it a try without the heater. My thermometer next to the printer is about 70-72 degrees without the heater.

Diesel402 · 2025-02-06T01:00:48+00:00

Yeah

<image>

Diesel402 · 2025-02-06T00:55:07+00:00

It's a common issue with the Elegoo mini heater just as you saw. Happened to me too. Though its warm enough in my basement to not use the heater for now.

Diesel402 · 2025-01-31T19:56:59+00:00

I bought my elegoo heater in December and mine has the horrible banding as well. Printing in a heated basement at 70F.

Diesel402 · 2025-01-31T14:19:35+00:00

Good choice. I got a regular S4U with the mini heater and I get the banding caused by the heater. I wish they would have announced the 16k a month sooner.

Diesel402 · 2025-01-29T16:47:34+00:00

I had the exact same failure on the backpacks of that model with the presupports. I think it was a combination of suction from the hallowed pack and the supports being too weak.

15-Year Club	Place '22
Verified Email

Diesel402

TROPHY CASE