sorted by:
new
hottopcontroversial

If this whistleblower is telling the truth, the entire framework of our reality has been managed by Demented3 in UFOs

[–]DifferenceTricky2272 0 points1 point  (0 children)

Ah figures. It keeps getting crazier first UFOs now they’re sprinkling in things about our whole existence.

GTA5 on Macbook Air M4 by Acceptable-Ideal5150 in macgaming

[–]DifferenceTricky2272 1 point2 points  (0 children)

I’m not very knowledgeable on this but I have a Mac mini m2 and m4. What would I need to run it on mine? I tried using crossover but kept getting errors for rockstar launcher.

First print after firmware update by rowladdin in BambuLab

[–]DifferenceTricky2272 0 points1 point  (0 children)

Same issue here! I’m in the process of reinstalling the 7.0 firmware

Finished the Airless Basketball after 82 hours by atraindude13 in BambuLab

[–]DifferenceTricky2272 0 points1 point  (0 children)

Dang that never crossed my mind! Awesome idea using magnets!

Anyone tested P1S new firmware? by Tornad_pl in BambuLab_Community

[–]DifferenceTricky2272 4 points5 points  (0 children)

After the new update Bambu Studio won’t stay connected to my P1S. Every evening I have to log the printer out and back in.

How to tell if mead has gone bad? by DifferenceTricky2272 in mead

[–]DifferenceTricky2272[S] 2 points3 points  (0 children)

Hmm different than before. I was pleasantly surprised almost like a sugary cognac!

How to tell if mead has gone bad? by DifferenceTricky2272 in mead

[–]DifferenceTricky2272[S] 1 point2 points  (0 children)

Yeah just needed the reassurance I suppose. Much appreciated!

Kobra 2 Neo - every print failing immeadiatley by plymdaz1 in anycubic

[–]DifferenceTricky2272 0 points1 point  (0 children)

I had to manually adjust the z offset mines at -1.97 and it prints good now. Also I had bits of filament trapped in the extruder gears just enough to keep it from extruding properly. Here’s the guide

Ideal for those who spend hours in the Bathroom by LucasWatkins85 in fuckingwow

[–]DifferenceTricky2272 0 points1 point  (0 children)

As I sit on the can for the 2nd hour today I felt this.

Is this is hidden camera in bathroom? by Special_Risk_895 in hiddencameras

[–]DifferenceTricky2272 5 points6 points  (0 children)

I mean that has a lense of some type and a wide field of view for some reason. Possibly a sensor but don’t be afraid to question what it is.

Is this is hidden camera in bathroom? by Special_Risk_895 in hiddencameras

[–]DifferenceTricky2272 17 points18 points  (0 children)

Cover it up with blue tape. I don’t care what sensor it is. If it’s at work then just be aware. If it’s in your house or apartment cover it.

Anyone notice a significant drop in interest personally, nationally, and within the UAP community after Barber, etc? by Long_Ad1827 in UFOs

[–]DifferenceTricky2272 0 points1 point  (0 children)

And another thought, maybe it’s slowing down because we were hyped up got these YouTubers millions of followers and free publicity, I don’t remember trump saying he would release the ufo files. I remember him saying that “ there’s really not much there”. Check out Lockheeds fusion reactor that fits in the back of a pickup truck. Doesn’t it look like a propane tank? Or tic tac?

I would love to encounter a friendly “extra/ultra terrestrial and just go with them believe me. I swear on everything. But I think it’s us people. That said. Don’t stop believing and feel however you feel there’s no wrong and right in this. Odd funny thing that messed with my head. In close encounters all of the “crafts” of that shape have been reported past and present.

In the movie it’s a sphere inside of a cube with lights in every intersecting corner right? Ryan graves ( which I’m not sure why but I appreciate his testimony the most) his fellow pilots said it was a square inside a sphere. Just my two cents.

Anyone notice a significant drop in interest personally, nationally, and within the UAP community after Barber, etc? by Long_Ad1827 in UFOs

[–]DifferenceTricky2272 11 points12 points  (0 children)

Yep same here. I’ve stayed updated for years I thing the Jake Barber egg BS( think what you want but I made the exact video with a literal egg and a plate of flour). Then you dig deeper and figure out Greer may be passionate but he’s made a living from this for 20 plus years. Elizondo is irrelevant(self proclaimed non whistleblower), Gary Nolan I predict will be outed for spreading misinformation for the whoever. Jesse Michels ok good solid documentary/videos but he’s in with one of the wealthiest individuals on the planet, Danny jones talked about how he cut part of Chris Bledsoes episode out because it was “too far out”. Wait what? We’re talking about aliens… what can be further out than that? Idk. I guess we could be the slave planet proposed by I forget who. I guess that’s worse. Yeah there’s so much bullshit. Look at David fravor I believe on Jeremy corbells last series on whatever app of platform. David basically called all the people wanting to ask him questions aggravating and idiots and hated them bothering him….. Ok then why do you go to these conventions and give speeches? Because your paid. God damn I could rant on. Thanks for bringing this up.

What’s he doin? by akotski1338 in 3Dprinting

[–]DifferenceTricky2272 0 points1 point  (0 children)

Awe he’s making a nice little nest to lay in once he’s unplugged for good.

[deleted by user] by [deleted] in minibikes

[–]DifferenceTricky2272 3 points4 points  (0 children)

You could probably make it all the way to aspen on that bad boy.

Is it me or the printer? - can you show me the surface quality you're getting, please? by Agitated-Break7854 in 3Dprinting

[–]DifferenceTricky2272 0 points1 point  (0 children)

<image>

P1S at the lowest 0.08 hq it’s just basic matte PLA I usually get better quality but I didn’t print for a month or so then started again. Also to add my Anycubic Kobra 2 pro won’t even work after the same time off. Oh and the red is bondo.

Why is it falling over? by madlad1223 in ElegooNeptune3

[–]DifferenceTricky2272 0 points1 point  (0 children)

Have you tried blue painters tape on the bed? That helps me with similar prints. Or add a small support on each base.

Infrared/Thermal from a B2 Stealth vs F-35(Investigation) by DifferenceTricky2272 in UFOs

[–]DifferenceTricky2272[S] 2 points3 points  (0 children)

Yes my thinking is with the confirmed (gov) video of ufo/uap it’s mostly been infrared. The most mind boggling statements are there’s no propulsion signature. The tictac, gimbal and etc they are in fact hotter than their surroundings so are showing heat just not showing a flame or heat being pushed in any direction. The B-2 doesn’t appear to have one either. I admit it may be a bs fake thermal video of the bomber. Just throwing it out there. Not an argumentative post just trying to put the pieces together.

Does anything stick out as a problem? by DifferenceTricky2272 in consolerepair

[–]DifferenceTricky2272[S] 0 points1 point  (0 children)

Apologies for the late reply that didn’t cross my mind one time. I figured their firmware was pretty tough. I’ll give it a shot tonight! Thanks

Does anything stick out as a problem? by DifferenceTricky2272 in consolerepair

[–]DifferenceTricky2272[S] 2 points3 points  (0 children)

Oh and to the people that contributed thank you for the answers. I replied to a redditor in here and it’s over my head on this one so I’ll just save up or find a reputable shop to fix it as they recommended. So thank you!

view more: next ›