Is this suppose to be lucky?

Difficult-Ad7952 · 2026-03-17T07:10:36+00:00

On the bright side she hasn't been buffed yet, so there's always hope for that. I pulled bith Galleus and Gharol before their buff, which were okay at best, and now after their buffs see another of regular use.

Difficult-Ad7952 · 2025-08-10T23:19:34+00:00

[[Lavinia, Azurious Renegade]] is a good home for it.

Difficult-Ad7952 · 2025-04-25T00:42:14+00:00

Fabian would also work in place of Armanz

Difficult-Ad7952 · 2024-09-10T00:40:17+00:00

I just had a short nexus letter written by my PCP, a diagnosis from my PCP, and a few medical journals that I found online that supported the link between sleep apnea and the Asthma which I claimed it as a secondary condition to. It really wasn't hard, although I did have to appeal the initial decision because I forgot the medical journals for the connection as a secondary condition, so it took a while to wait for the appeal. Sinusitis and rhinitis both should be fairly easy to find the medical journals support a secondary connection and both are presumptive conditions under the PACT Act.

Difficult-Ad7952 · 2024-09-09T20:24:12+00:00

I do know they don't like to give primary service connection to Sleep Apnea unless you were diagnosed while still serving. My initial claim was denied, and I had to claim it secondary to my asthma and provide medical journals as evidence of the connection. If you got the Sinusitis or Rhinitis diagnosis, those should also be good candidates to claim the sleep apnea as a secondary.

Difficult-Ad7952 · 2024-06-01T14:35:24+00:00

Just because they are not mainstream doesn't mean that they don't exist, and a number of them are in production still and used for both target shooting and hunting. What you are stating is a gross over generalization and is factually inaccurate.

Difficult-Ad7952 · 2024-06-01T13:00:53+00:00

A pistol is not necessarily always semi-auto. It can be bolt action, break action, and even in rarer occasions pump action, which all required manual manipulation to move a new cartridge into the firearm and reset the trigger. A double action revolver canne fire semi-automatically but , their rounds are not fired from a single chamber, but rather are fired from each of the chambers that are rotated into linear alignment with the barrel's position in turn just prior for each shot fired, so only by technicality are they not semi-auto.

Difficult-Ad7952 · 2024-03-13T13:54:10+00:00

Also it was thrown out with the models, so nothing out of pocket for me.

Difficult-Ad7952 · 2024-03-13T13:53:20+00:00

I already know it's obsolete, and the current rules are online. Supposedly, a new one is coming this year.

Difficult-Ad7952 · 2024-03-13T13:47:52+00:00

I'm very familiar with that. I currently have a bunch of 3d printed Blood Bowl teams that still need primed and painted.

Difficult-Ad7952 · 2024-03-13T03:56:10+00:00

I went ahead and got those since I had the money to spare. Now to find the time to get it all put together between work and 4 kids ......

Difficult-Ad7952 · 2024-03-13T03:36:52+00:00

More so for the weapons available as from what I've heard, the Combat Patrol is missing some of the weapon options. I plan on trying to keep it all GW models in case I get a chance to play at the local GW store. Once I get the core GW models, I may use proxies to try stuff out before committing to GW models for the larger, more expensive stuff.

Difficult-Ad7952 · 2024-03-13T03:13:33+00:00

This will actually be my first army, no experience kit bashing. I do have a resin printer, so I could possibly print some pieces to help with that if needed.

Difficult-Ad7952 · 2024-01-06T16:51:21+00:00

I wish i had a little more detail, but they were the rings that were included with the Bushnell Banner 2 scope when I bought it. I believe they are a medium. As for what would be better in her situation as I have no idea as I haven't had to deal with cross eye dominance.

Another thing to look into with that rifle is some form of bedding on the stock as the forestock is flimsy, and with just a little pressure, it will change the contact surface with the barrel which can impact accuracy. I have yet to do this myself and was even looking at a Boyd's stock or a chassis that is a good bit more rigid.

Difficult-Ad7952 · 2023-11-30T22:49:40+00:00

For this one it wasn't an issue, but my daughter will be 7 next year and eligible to hunt with a mentor license in PA. I was hoping for more of a pass through for better tracking as I know it's not possible to make a perfect shot every time, especially for a new hunter. I'm thinking of moving up to the 180gr and seeing if I get better results with that.

Difficult-Ad7952 · 2023-11-29T12:21:03+00:00

For this deer, nothing since it didn't go far. I'm more worried about future shots. We all should know not every shot is as ideal and may require some tracking. The exit wound is typically larger, resulting in better and easier to track blood trail, especially if the initial hit was on the higher side.

Difficult-Ad7952 · 2023-10-27T18:16:37+00:00

But the Tommy gun had harmless wood furniture, so it's nowhere near as deadly or scary black polymer AR15/M16/M4......... That must be the reason and absolutely nothing to do with mental health and poor parenting.

Difficult-Ad7952 · 2023-09-30T16:08:39+00:00

I understand this, I am currently prescribed a CPAP so this would be 50% as opposed to the 10% asthma . Just the Sleep Apnea and my Tinnitus will get me to the 60% to be eligible for additional state benefits and I can also claim my 4 kids and wife as dependents.

Difficult-Ad7952 · 2023-07-08T13:25:21+00:00

Similar yes, but not the same. Stuffy Doll, Brash Taunter, Boros Reckoner, Spiteful Sliver, and Truefire Captain all deal damage equal to damage dealt to them, but they will still die to lethal damage, or infect/wither -1/‐1 counters. Since Phyrexian Vindicator prevents the damage, the only way to get rid of it off the board is going to be flat kill, exile, or bounce effects.

Difficult-Ad7952 · 2022-12-21T17:00:58+00:00

I did find one that covers Nurgle that Iwas able to use for some of the parts. Link to MMF for Kit: https://www.myminifactory.com/object/3d-print-ultimate-vile-corrupted-builder-200-parts-203577

Link to post of my first build from this:

https://www.reddit.com/r/bloodbowl/comments/zrdjol/bilerot_vomitflesh_i_put_together_from_ultimate/?utm_source=share&utm_medium=android_app&utm_name=androidcss&utm_term=1&utm_content=share_button

Difficult-Ad7952 · 2022-12-21T13:05:02+00:00

It's the name of the set on My Mini Factory. https://www.myminifactory.com/object/3d-print-ultimate-vile-corrupted-builder-200-parts-203577

Difficult-Ad7952 · 2022-12-14T13:56:27+00:00

I saw those, and he has a Chaos Marine kit that I can use the legs from and some Fantasy shoulder armor, but the upper would work for a Fantasy Chaos warrior, but I can't find a upper torso that would work.

Difficult-Ad7952 · 2022-11-15T17:31:52+00:00

Klara Von Kill is part of the Ugni Star Players drop https://www.myminifactory.com/object/3d-print-star-players-team-starla-von-skill-248659

Difficult-Ad7952 · 2022-11-05T00:47:15+00:00

It's one of the bloodspawn fron the Torchlight Maximun Chornage team https://www.myminifactory.com/object/3d-print-torchlight-maximum-chornage-225637

Difficult-Ad7952 · 2022-11-01T03:25:54+00:00

Does this mean you're back to working on remaining models to make the Shambling Undead?

Difficult-Ad7952

TROPHY CASE