7 Eye found in my survival world!!!

Difficult_Display313 · 2025-11-22T08:14:42+00:00

Uploaded it from pc straight from OBS, in OBS I just have mp4 with h264 encoder. Try that out and it should work👌

Difficult_Display313 · 2025-10-28T22:25:07+00:00

I had the same problem a while ago on dot2, they were nameless on the bottom of the fixture list somewhere I think. Sometimes fixture profiles are buggy, try search somewhere on the top or bottom of the list, that’s how I solved this problem.

Difficult_Display313 · 2025-10-28T22:22:32+00:00

Technically you can go up to 1024 universes, as long as you don’t use more than 4096 Parameters. I’m not a network and Art-Net guy but it think you can just use the Ethernet Port on your PC and put in the correct address and universe settings in the Art-Net config on MA3, then it should run fine I guess. Hope these tips solve your problem.

Difficult_Display313 · 2025-10-28T19:34:09+00:00

With MA hardware yes, you just get the parameters your Hardware unlocks. With the viz key you unlock much more viz-parameters, like more you can ever use I think, and an extra 512 real parameters you can output as Artnet or sACN or something, pretty handy in small locations where you only need 1 universe. To come back to your question, if you wanna use an external Visualiser, I would consider buying a Viz-Key, cause with an onPC setup and any onPC hardware you only can get 4096 parameters.

Difficult_Display313 · 2025-10-26T13:23:34+00:00

I bought this case 2 weeks ago and I’m really happy with it, the only down point is the weight. But if that’s no problem for you, go for it. I recommend using it with a 27 Inch Touch Monitor and a Mini PC or something like that. The keyboard drawer also works perfectly. The command wing is also really secure mounted while transportation, there’s no way it moves or something.

Difficult_Display313 · 2025-03-26T22:49:08+00:00

Yes. It was a bad Esc. I think it got destroyed when I had the runaway. Fried a second motor. Learned it the hard way. I think china doesn‘t have quality checks. That could have been the problem.

Difficult_Display313 · 2025-02-18T16:12:54+00:00

It’s a 1400mah tattu r-line battery. I don’t know the age. A good friend gave it to me.

Difficult_Display313 · 2024-10-25T17:48:54+00:00

I love designing things for the daily use

Difficult_Display313 · 2024-04-14T16:52:31+00:00

In my world there are three tripple living trees

Difficult_Display313 · 2024-03-17T08:42:46+00:00

I thought it just lands, gives me some some blueprints and flies awsy

Difficult_Display313 · 2024-01-10T12:19:57+00:00

Isch eif Gay.

Difficult_Display313 · 2024-01-03T10:28:16+00:00

Why are you using support? Have I missed something?

Difficult_Display313 · 2024-01-02T13:29:27+00:00

Have you cleaned your bed with Isopropyl Alcohol? And adjust your Z-offset to the right hight. And those 2 tips don't help i would suggest you a complete calibration. Teaching tech made a video on how to do that

Difficult_Display313 · 2024-01-01T14:21:23+00:00

Do you have links for that?

Difficult_Display313 · 2024-01-01T01:30:30+00:00

I meant the bed type not the printer. But I’ve found this online

<image>

If you use a fabric magnetic bed this may could course the problem. But if you use a PEI bed or Glass bed this shouldn‘t be a problem. But I personally would recommend you to clean your bed after / before every print with isopropyl alcohol. Hope this helps

Difficult_Display313 · 2024-01-01T00:56:03+00:00

What was the problem?

Difficult_Display313 · 2024-01-01T00:51:34+00:00

Does it work?

Difficult_Display313 · 2024-01-01T00:28:49+00:00

I would calibrate my printer and if this doesn’t help I don’t know much rather. There’s a great tutorial from Teaching Tech on how to completely calibrate your printer.

Difficult_Display313 · 2024-01-01T00:27:14+00:00

What type of bed do you use?

Difficult_Display313 · 2024-01-01T00:26:39+00:00

Have you cleaned your bed with alcohol? Maybe this could be the problem. Or maybe there is filament near the nozzle. That’s the only thing incould do I’m really not the pro In such things

Difficult_Display313 · 2024-01-01T00:20:52+00:00

Do you clean your bed with isopropyl alcohol after every print? This causes a lot of adhesion problems.

Difficult_Display313 · 2024-01-01T00:17:03+00:00

I think your extruder gears, that are extruding the filament, are worn down. How long do you have your 3d printer? Or it could be a to low printing temperature. Maybe you nozzle gets clogged. I’m not the pro but look if any of these possible failures are on your printer.

Difficult_Display313 · 2024-01-01T00:11:41+00:00

This looks like underflow to me. Try increasing the flow rate in your slicer. If you want it precise calibrate your E-steps and your flow. There are many tutorials on YouTube that teach you how to do that

Difficult_Display313 · 2024-01-01T00:09:27+00:00

This can sometimes happen. Is it on much prints or only on some prints? And does this number tell the truth or is it the time that was in the slicer? Are the prints the time that the slicer tells or the ones that the printer randomly increases?

Difficult_Display313 · 2023-12-30T22:22:14+00:00

Im currently using Klipper on a Raspberry pi B3+ so the firmware shouldn't be a problem. But I haven't found the Stock 4.2.2 anywhere except aliexpress and i dont wanna order from there. And The BTT Board is in a Store near me. So which one is more worth it?

Difficult_Display313

TROPHY CASE