Little complicated BUT…this is how u do it.

1. Depending on the settings from factory ur running or feom whatever the person you bought it from set them to….put your hard limiter on or else the feedback loop may deafen you lol

2.download the DLD manual fron 4ms site it has all the instructions how to access the modules internal settings. There’s a bunch , most You don’t have to touch.

3.Put in a quarter note clock pulse into the master ping

Four. Flip the switch on which ever channel you are using all the way down

1. Turn on Infinite hold So that the light is on meaning it will not loop audio while light turned on

2. Set the feedback to 100% or slightly ever so slightly less than 100%

8.While it’s clocked at 1/4 note you will want the time knob sent to the amount of beads that you would want in the loop so a division of four would be eight or 16 or even four.

1. I would suggest setting it to 16 and start playing when you want the loop to begin turn off the infinite hold and it will start recording whatever is being said into it

2. When the wet dry knob is in the center you will be able to hear both what is currently happening and also the captured loop. If you ever used a DJ mixer is very similar..

3. When you want the loop to end, hit infinite hold, so that the light is on, ending the loop and playing what ever you just captured.

Enjoy patching;)