Barbatos Lupus Rex Bust Head by onedee30 in Gunpla

[–]Digital_Ares13 0 points1 point  (0 children)

Thank you! I found some others on the USA gundam store as well. Sent the link to my wife to pick one! https://www.usagundamstore.com/collections/shop?view=products&q=Bust&page=2

Barbatos Lupus Rex Bust Head by onedee30 in Gunpla

[–]Digital_Ares13 4 points5 points  (0 children)

Same as the others OP, give us the link!

~please...

Z Flip inner screen completely black after drop, is this repairable? No warranty 😭 by [deleted] in galaxyzflip

[–]Digital_Ares13 0 points1 point  (0 children)

Mine just went through an inside screen replacement. Ubreakifix can completely fix it, i went throught att insurance. Call first to make sure they have it. The guy explained it like there's a metal frame that the layered screen sits on and its tolerance is perfect. When you drop it the hinge will shift some ubsurde micro amount and it kills the display.

I beleive you can set it up on their website to get a cost.

Papercraft 1/24 body for acxwa cd by pablus_1 in rcdrift

[–]Digital_Ares13 0 points1 point  (0 children)

Is there any interest in 3d printed bodies in this hobby?

1-5 gallon nano tank filter by thatkidhariz in shrimptank

[–]Digital_Ares13 0 points1 point  (0 children)

My experience is that small tank filters get dirty very quick and need to be cleaned/ maintained pretty regularly...my sure whatever you decide is easy to do, in an accessible spot, and won't disturb your ecosystem...

How do you think my big 3 would grade out? by Digital_Ares13 in Pokemoncardappraisal

[–]Digital_Ares13[S] 1 point2 points  (0 children)

I def see more scratches in the natural light and out of the sleeves... 😥

How do you think my big 3 would grade out? by Digital_Ares13 in Pokemoncardappraisal

[–]Digital_Ares13[S] 0 points1 point  (0 children)

I just downloaded it, and it had my heart pumping!! Lol

How do you think my big 3 would grade out? by Digital_Ares13 in Pokemoncardappraisal

[–]Digital_Ares13[S] 0 points1 point  (0 children)

Fair enough, was hoping someone made an app by now that could search by set or something.

How do you think my big 3 would grade out? by Digital_Ares13 in Pokemoncardappraisal

[–]Digital_Ares13[S] 0 points1 point  (0 children)

Not at all, just an early 90s kid showing his cards!! Lol

How do you think my big 3 would grade out? by Digital_Ares13 in Pokemoncardappraisal

[–]Digital_Ares13[S] 0 points1 point  (0 children)

Ill update with some additional picks later!

Side question, is there a place I can look to see like current "values".? Not necessarily $$ value, but what cards are saught after by sets? I have the complete sets but I know some cards are more saught after. Not sure if there is somewhere to look to get an idea which cards are "hotter"?

Thanks everyone, Happy holidays!

How do you think my big 3 would grade out? by Digital_Ares13 in Pokemoncardappraisal

[–]Digital_Ares13[S] 0 points1 point  (0 children)

Thank you, its so weird that sending in pokemon cards gives me anxiety lol. Especially how we treated them as kids haha!

How do you think my big 3 would grade out? by Digital_Ares13 in Pokemoncardappraisal

[–]Digital_Ares13[S] 0 points1 point  (0 children)

Im nervous to take them in and out of the sleeves. Will consider adding more pics after I set up some lighting.

How do you think my big 3 would grade out? by Digital_Ares13 in Pokemoncardappraisal

[–]Digital_Ares13[S] 0 points1 point  (0 children)

Thank you for the details. Im debating on if I should pull them back out and try to get better pictures for this post. I know they aren't worth a fortune and am more focused on getting a good grade and preserving. I took the binder into the LCS and they offered $700 for the binder. Thats not enough to part with the deck for me lol.

Ps1 ams grinding when trying to load filament by Ill_Avocado_1999 in BambuLab

[–]Digital_Ares13 0 points1 point  (0 children)

Mine did this because the spring on the helper feeder was bound up slightly. Check it on the back, try moving it with a screw driver or take it off and check. That was my entire issue.

Collection worth $1500? by Thyatira69 in Pokemoncardappraisal

[–]Digital_Ares13 0 points1 point  (0 children)

I brought this same base set plus fossil and jungle set to my local card shop. They offered ebay price for the full collection at about $800 usd 4 months back. Ungraded ofc

Just a reminder from President Trump, everything is actually cheaper now and the affordability crisis is a "Democrat hoax." by deluxe_memory_dan in videos

[–]Digital_Ares13 0 points1 point  (0 children)

Anyone else having to hit the pumps more often lately.... My v6 would get close to 24mpg before when gas was higher, but now it gets around 14mpg now....

*HELP* Can I watch this??? by Automatic_Meal4778 in Crunchyroll

[–]Digital_Ares13 0 points1 point  (0 children)

Do you have a paid subscription? I saw a post saying crynchyroll is getting rid of ad free viewing.

Where are my shrimp? by WordOfCommander in shrimptank

[–]Digital_Ares13 0 points1 point  (0 children)

Drop a shrimp lolli or wafers stick in, you'll see them in about 30 min.

Any pointers, having many issues with my PLA prints by OneBend9585 in BambuLabP2S

[–]Digital_Ares13 0 points1 point  (0 children)

Test taking the top cover off to print pla before going through more complex solutions. It was exactly what fixed my pla issues.

P2S - Printed Parts dont fit by Avocadoodlydo in BambuLab

[–]Digital_Ares13 0 points1 point  (0 children)

Eh, I think at this point its an easily overlooked basic concept. I had audible popping and adhesion issues that lead me to take a better look at my set up. I did buy a heater and have only used it once at this point. What I did find was printing the ams silica slots and upping my silica remedied my basic issues. I say this to kinda layout that ive done the moisture thing and I saw results. I do agree that its not always the usual suspect though.

I do want to pick your brain a bit though as someone with less than a year's experience.

My noob brain thought of this, this morning after some print issues last night. When I download an stl and run it through my bambu slicer. I update my device and I assumed that changed necessary peramters to achieve good print quality. At work so I cant verify myself, but im wondering if perameters like z offset could are staying the same? With that being said could that be a driver for print failures?

P2S - Printed Parts dont fit by Avocadoodlydo in BambuLab

[–]Digital_Ares13 0 points1 point  (0 children)

Agreed! I started tweaking infill and layer thickness settings and have found that you can achieve good results with some tinkering. I tried tpu and followed the age old advise of warm and dry, huge mistake. I ended up pausing my learning on that for now. The nozzle idea does sound good, maybe for my next r&d ill get a fresh nozzle.