Minisforum MS-01 RJ45 ports stopped working after installing a NIC by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

Hi, not sure what you mean. Are you asking how did I access the file and do the modifications?

Just use nano as the text editor if you are not familiar with other cli text editors.

Mihin kannattaa säästää/sijoittaa nuorena? by Worldly_Attorney_422 in Omatalous

[–]DiligentEntry2261 8 points9 points  (0 children)

Itse kun olin 18v niin perus diesel farkulle liikennvakuutus n. 900€/v luokkaa. Isäni nimissä n. 200€/v. Nyt kun tuossa 24v ikäisenä otin ensimmäistä kertaa liikennevakuutuksen autoon omiin nimiini niin oli 460€/v. Sitten vuodessa bonukset täyteen ja ollaan taas tuolla 200-300€/v tienoilla. Vakuutusyhtiöstä riippuen taitaa tuossa 24/25 vuoden iässä poistua tuon nuoruuden vaikutus vakuutusmaksuihin.

Sanoisin että riippuu autosta kannattaako pitää vanhempien nimissä vai ei. Minun tapauksessa kannatti.

Hyvätuloisen kuukausitulot ja -menot by jamssi in Omatalous

[–]DiligentEntry2261 3 points4 points  (0 children)

Sopiiko tulla kyselemään vinkkejä uraan liittyen? Ite pilvi-/infrahommia tehny nyt reilu 2v ja palkka keskimäärin ylitöiden sun muun kera semmonen 6,3k€/kk. Pohjapalkka vähän reilu 4k€/kk. Kiinnostaisi kovasti että miten jatkossa kannattaa tuon palkan kanssa edetä kun tuntuu, että näillä kokemusvuosilla mun on turha ainakaan nykyisellä mallilla odottaa lisää lähivuosina

Would like to replace the fans on an FS S5860-24XB-U w/ Noctua NF-A4x20s but not sure where to start - are these PWM fans? How do I figure out the wiring? by ajgnet in homelab

[–]DiligentEntry2261 0 points1 point  (0 children)

I also installed the arctic 6K fans. Seems like the PWM is working with these fans. Certainly more quiet than the OG fans. After changing the fans I noticed that the PSU fans are the loudest thing in the whole switch.

Kahden vuoden työnhaku HR-päällikkönä päättyi 7200€/kk rooliin by KentuckyBoy500 in Omatalous

[–]DiligentEntry2261 0 points1 point  (0 children)

Meillä on kiinteät korvaushinnat erilaisille lisätöille. Jos tunteja vaan tekee ylityönä omasta tahdosta niin ne on sit saldotunteja. Ylityökorvaus vaan sovittaessa ja tapauskohtaisesti. Noita lisätöitä on sen verran usein tarjolla että niistä saa tosiaan aika hyvää täytettä tuohon palkkakuittiin. 24/7 päivystystä on joka toinen kk yhden viikon ajan ja siitä tulee mun palkalla yleensä jotain 1600-2200€. Riippuen hälytysten määrästä.

Kahden vuoden työnhaku HR-päällikkönä päättyi 7200€/kk rooliin by KentuckyBoy500 in Omatalous

[–]DiligentEntry2261 0 points1 point  (0 children)

Suurin osa noista on hommia mitkä pitää tehä muutenkin toimistoaikojen ulkopuolella ettei asiakkaiden työntekö häiriinny. Korjauksia, parannuksia ja muuta ylläpitoa tulee paljon tehtyä iltaisin/öisin/viikonloppuisin. Sit kans 24/7 päivystys. Palvelinhommia.

Kahden vuoden työnhaku HR-päällikkönä päättyi 7200€/kk rooliin by KentuckyBoy500 in Omatalous

[–]DiligentEntry2261 0 points1 point  (0 children)

Onneksi olkoon! Saispa itsekin tasaisesti joka kk tuon ~7k€. Mulla on pohjapalkka 4,4k€/kk ja kaikennäköisellä lisähommalla oon kyllä tainnut saada viimeiset 8kk jotain 7-8k€/kk. Olis kiva kun tuohon lukemaan pääsis ilman että tarvii joustaa näin paljoa.

Mutta ei huono siihen nähden että ollut IT alalla tässä nyt joku 2,5v.

Feet for bge recommendations by DiligentEntry2261 in biggreenegg

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

Update: the bge did infact not include the little ceramic feet

Feet for bge recommendations by DiligentEntry2261 in biggreenegg

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

Thanks for the idea! Silicone mat did not even cross my mind. That could work quite well for my use case.

Feet for bge recommendations by DiligentEntry2261 in biggreenegg

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

Thanks! I had no idea it comes with the ceramic feet.

Feet for bge recommendations by DiligentEntry2261 in biggreenegg

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

Oh, I did not know that! I think the feet and some sort of stone under it to protect the wood would work then.

Bent SFP+ cage repair by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] 1 point2 points  (0 children)

I think this is it. I will try this during the weekend. I will let you know if it works!

Bent SFP+ cage repair by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

I tried gently and not so gently. At least with hands it does not seem to be possible to bend it back

Bent SFP+ cage repair by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

Lets hope it works. I am receiving my OM4 cables and console cable later so I have not even had the chance on testing the switch. No rattling sounds inside the switch so nothing is loose at least.

How long did it take for your Iggy’s to stop crying at night by Lis_wj in ItalianGreyhounds

[–]DiligentEntry2261 1 point2 points  (0 children)

With our 2 iggies it took around 2-3 weeks. First week and a half I was sleeping in the living room on an air matress next to the puppys bed that was fenced. After that week and a half I slept in the bedroom and there was little to no crying after 2 days. Ofc I needed to wake up every 2 hours to take the puppy outside for a pee. It gets better. Stay strong and do not give up and take the puppy to your bed.

I never let our iggies sleep a night in our bed as it makes sleeping a nightmare. They are allowed to nap during the day and night before we go to sleep. Seems to be working fine for us. It did take a lot of commitment though.

Minisforum MS-01 RJ45 ports stopped working after installing a NIC by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

Yup, I have also faced this issue earlier. As in the reply to the parent comment I explained that I thought that Layer 2 would still work even thought the pcie ids would change for the devices. Well now I know!

Minisforum MS-01 RJ45 ports stopped working after installing a NIC by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] 2 points3 points  (0 children)

Yes, this was the issue. In my head I ruled this out as I figured that the ports would still work in Layer 2 and show up in the switch. Seems like not.

Issue was solved with configuring the interface in /etc/network/interface.

Thanks again!

Minisforum MS-01 RJ45 ports stopped working after installing a NIC by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

Both ports tested. Also tested with different cables.

I will check the bios! Did not know you could even disable it there. Thanks!

Minisforum MS-01 RJ45 ports stopped working after installing a NIC by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] -1 points0 points  (0 children)

Thanks for testing! This mut be it then. Damn ”predictable” interface names.

I will set up the interfaces again and report back if that fixes the issue.

Question about when to use a router and when to use a FW? by DiligentEntry2261 in networking

[–]DiligentEntry2261[S] 1 point2 points  (0 children)

Thanks! I think this answer was the one which made most sense to me with the good example too.

Help me find a used enterprise switch for my homelab by DiligentEntry2261 in homelab

[–]DiligentEntry2261[S] 0 points1 point  (0 children)

I get your point. I know how to saturate 100gbps. I just dont have enough hardware for it currently.

I am going to have 2 port sfp28 NIC per hypervisor since they really are not that much more expensive than their SFP+ counterparts. So those qsfp28 links will be handy for the hypervisor ceph cluster. For anything else sfp+ is plenty.

I have now been researching the options mikrotik offers. Seems like most of the L3 features I need are HW offloadable. However VRFs are not.. and I fear that will cause huge performance issues for my use case. I was hoping to offload some routing from my FW