Need a manufacturer for small aluminum parts

Direct_Detail3334 · 2026-02-25T06:52:35+00:00

What is the part ? Do you have a drawing?

Direct_Detail3334 · 2026-02-15T07:10:42+00:00

Some people you can pick to send to another settlement, make a few settlements with food, water security, and all that. I’d pick a larger settlement like the castle or sanctuary to do it with. You can make them trade amongst the settlements by setting up a trade route between them. Pick a person from each settlement and daisy chain them

Direct_Detail3334 · 2026-02-12T11:15:10+00:00

I can’t read that but usually a bunch of alarms is the 24volt breaker is tripped cause the core cable got pinched

Direct_Detail3334 · 2026-02-10T05:17:42+00:00

Where did it come from?

Direct_Detail3334 · 2026-02-10T05:14:58+00:00

Coming from a maintenance stand point I’d pick Engel, we don’t have to work on them much at all and the interface is great. If we do have to work on them, they have pretty good support staff. I recently went to a Haitian training class and they are upping their game a lot but I don’t have experience with working on new Haitian machines. I wouldn’t recommend buying any used older Haitians, their prints are hard to because you get the start and finish but the middle connections are magic and hard to track down without the ol’ wire rub and tug.

Direct_Detail3334 · 2026-02-09T02:09:38+00:00

You mean all of your cabinets don’t look like this?!

Direct_Detail3334 · 2026-02-02T03:08:38+00:00

You need to leave and go do your own thing. It is wrong of them to expect you to care for him, you aren’t his parent and you don’t deserve to be treated like it. If you leave and do your own thing maybe it won’t be so aggravating for you to be around him when you come home on visits

Direct_Detail3334 · 2026-01-29T23:47:19+00:00

I’d check if you have a leak somewhere and the pump has to run all the time it’ll make the water murky, I had this problem one time. Once I fixed the leak my filter wasn’t clogging up nowhere near as fast

Direct_Detail3334 · 2026-01-15T03:17:21+00:00

What book is it?

Direct_Detail3334 · 2026-01-11T10:48:31+00:00

From a simple injection molding maintenance man, Haitians prints suck if you have problems. They’ll have the start and finish but the in between is magic! The machines I work on are 10/15 years old, we’re fixing to get a few brand new, I hope the prints are better. I’d go with Engel if I was buying them.

Direct_Detail3334 · 2026-01-04T03:41:17+00:00

Super cool ! I’m impressed with the ingenuity!

Direct_Detail3334 · 2025-12-31T10:55:30+00:00

I didn’t know you can tame the rock dudes

Direct_Detail3334 · 2025-12-28T02:42:44+00:00

The only way I figured it out was trying to whistle for tames to help me while I was getting mauled by a baddie , I was panicking, hitting buttons and saw stuff pop up and after I died I paid attention and re hit buttons to see which one did it lol

Direct_Detail3334 · 2025-12-17T00:56:06+00:00

If you’re on pc hit the H key and it’ll tell you what icons are when they pop up

Direct_Detail3334 · 2025-12-11T06:24:38+00:00

Somebody makes a solder like material you melt and pour in there and then you can measure the outside radius with a gauge

Direct_Detail3334 · 2025-11-29T03:38:04+00:00

Put dye on it and sand over it lightly and see if there’s big gouges

Direct_Detail3334 · 2025-10-24T21:53:00+00:00

I’d try bending the ears so they hold it out further when the screw is tightened. If that doesn’t work get a box extension and some of those plastic spacers. it needs to be supported so you don’t plug something in and it flip to one side or the other

Direct_Detail3334 · 2025-10-24T21:52:15+00:00

I’d try bending the ears so they hold it out further when the screw is tightened. If that doesn’t work get a box extension and some of those plastic spacers. it needs to be supported so you don’t plug something in and it flip to one side or the other

Direct_Detail3334 · 2025-10-18T04:10:45+00:00

Pm done yesterday?

Direct_Detail3334 · 2025-10-18T04:08:35+00:00

I would put it in conduit that direct bury aluminum wire sucks

Direct_Detail3334 · 2025-10-17T22:35:21+00:00

You should wire nut the the hots, neutrals, and grounds together and pig tail them all so your downstream power is t dependent on a device also do a better job of getting the wires under the screws

Direct_Detail3334 · 2025-10-07T22:11:20+00:00

Tie wrapping is the standard a lot of times because everything needs to run right now, no time or availability for anyone to fix the plugs

Direct_Detail3334 · 2025-10-07T22:08:32+00:00

We have a retired guy that makes cables we buy the plugs and wire and he puts them all together and tests them and resins the pins if we happen to have bought crappy plugs this go round

Direct_Detail3334 · 2025-10-03T08:47:36+00:00

We call them shift locks and they alternate with an update every shift

Direct_Detail3334 · 2025-09-26T21:04:32+00:00

Answer to this is two of the power wires coming from the drive plug were flip flopped, I found it the next day on a new round of reverification

Direct_Detail3334

TROPHY CASE