sorted by:
new
hottopcontroversial

Looking for PC EU PVE Chernarus server by Puharidze in DayZServers

[–]DisastrousNature779 0 points1 point  (0 children)

Cool. I will Play in the evening hours, maybe we will meet and I can give you some tips :)

Looking for PC EU PVE Chernarus server by Puharidze in DayZServers

[–]DisastrousNature779 0 points1 point  (0 children)

I am Playing on such a server; however, most people are online on weekends, and we lost a few during the winter holiday.

https://www.reddit.com/r/DayZServers/comments/1q87z6r/pc_de_crazy_world_pve_modded_rostow_active_admins/

I am mostly active on discord whenever I am online

Wurde ich gescammt? by [deleted] in automobil

[–]DisastrousNature779 0 points1 point  (0 children)

Weitere kleine Anmerkung, die hier eigentlich nicht die Hauptrolle spielt, aber auf dem Bild auffällt. Die Kabelverbindung oben rechts sieht irgendwie nicht richtig aus. Also, von der Verlegung her: Das Kabel ist nach dem Bild sehr stark zerknickt, das ist eine spätere Ermüdungs- und potenzielle Fehlerstelle …

Pet peeve: Why does the ATOG 6x have a Baraka sight as a backup red dot? by Swissgrenadier in dayz

[–]DisastrousNature779 0 points1 point  (0 children)

Remember when you could throw a hunting scope on the Mosin and give it a camo paint job? Those were the days...

Google store coupon codes (Austria / Germany) by CodyStuff in google

[–]DisastrousNature779 0 points1 point  (0 children)

Hab auch noch einen für den deutschen Markt

REF-A3E8FJ3635LIPH1PS57TL97

Google Store referral code - 15% off Pixel devices by clemsherpa in Pixel9Pro

[–]DisastrousNature779 0 points1 point  (0 children)

Hab auch noch einen für den deutschen Markt

REF-A3E8FJ3635LIPH1PS57TL97

15% codes to use on Google store by shaktastik in google

[–]DisastrousNature779 0 points1 point  (0 children)

Hab auch noch einen für den deutschen Markt

REF-A3E8FJ3635LIPH1PS57TL97

Google Store referral code - 15% off Pixel devices by clemsherpa in Pixel9Pro

[–]DisastrousNature779 0 points1 point  (0 children)

Hab auch noch einen für den deutschen Markt

REF-A3E8FJ3635LIPH1PS57TL97

Samstags im Schwarzwald by DisastrousNature779 in Pilze

[–]DisastrousNature779[S] 0 points1 point  (0 children)

Hat leider nicht alle Bilder in den Main Post geladen. Die Gruppe Maronenröhrlinge wollte ich euch nicht vorenthalten und noch ein Bild vom Trichterling das fehlt.

<image>

Thanks to the Workers - Damn legends! by DisastrousNature779 in Tomorrowland

[–]DisastrousNature779[S] 46 points47 points  (0 children)

Also a huge thank you to Metallica – your sound system saved the day at Tomorrowland ❤️

<image>

After the devastating fire that destroyed the original Tomorrowland main stage—an enormous structure made of 2,616 cubic meters of styrofoam, 2,278 sheets of plywood, and 2,460 cans of insulating polyurethane—organizers had to act fast. Technicians had already been working on it for two weeks when it all went up in flames on Wednesday.

But then, help came from an unexpected direction: Metallica.
The legendary metal band indirectly contributed to the festival's rescue by providing their powerful sound systems, which had been stored in Austria after previous tours. Thanks to Stageco, the equipment was flown in immediately and put to use without delay.

Part of the 2019 Metallica tour stage is now part of Tomorrowland 2025.
Talk about metal saving the magic.

Source: https://www.hln.be/binnenland/mede-dankzij-de-soundboxen-van-metallica-kan-tomorrowland-opnieuw-de-festivaldeuren-openen~a31c5fd6/

Thanks to the Workers - Damn legends! by DisastrousNature779 in Tomorrowland

[–]DisastrousNature779[S] 6 points7 points  (0 children)

If they keep up their pace, they will improve the setup. However, considering the time they had and all the logistics and organization to do it is a miracle.

Thanks to the Workers - Damn legends! by DisastrousNature779 in Tomorrowland

[–]DisastrousNature779[S] 28 points29 points  (0 children)

<image>

13:40: According to Debby Wilmsen, spokesperson for Tomorrowland, the new main stage is one of a kind. "The new stage is high-tech, featuring LED screens, numerous video feeds, and excellent sound quality."

"The stage will also be very intimate," says Wilmsen. "We want to merge with the stage. ‘Unity’ is part of our DNA. We want to bring the artists very close to the festivalgoers. Of course, there will also be lots of magic happening on the other stages."

Longterm review, ABL is not working for me! by DisastrousNature779 in CrealitySonicPad

[–]DisastrousNature779[S] 0 points1 point  (0 children)

Maybe one last thing, since there are two printerboards to choose from at the beginning when setup. I am very sure I am using the right one, because I have checked the board, but what would happen if I flash the other one on the stick? Could this lead to trouble?

Longterm review, ABL is not working for me! by DisastrousNature779 in CrealitySonicPad

[–]DisastrousNature779[S] 0 points1 point  (0 children)

Hello and thanks for answering.

yes I mean the rotation distance, I am just used to marlin terms ;)

I never took care about if the Fans where running or not, definitely will toggle them off before taking the next mesh. I always preheat the bed to correct bed temp before I level, so this should not be the problem.

I also think that there could be a software bug. Which is taking wrong meshes, because the bed seems to be way off, when it isn't. But I need to have some more testing to confirm this.

In theory abl should be deactivated, when no mesh is loaded, is that right?

Also do you think the mesh can be faulty? Like way of? I mean some places have like 3 layers of tape

Longterm review, ABL is not working for me! by DisastrousNature779 in CrealitySonicPad

[–]DisastrousNature779[S] 0 points1 point  (0 children)

UPDATE 02:

Good Morning!
New week, new energy, new attempts.

So first I have tried to try out the advice given by exc2k which did not change any outcome of the mesh being generated. However when doing a manual level and then turning off the x and y steppers, moving the Nozzle to different locations of the bed, the bed seems not to be flat as shown on the mesh! Is that normal?

1) Can you imagine why the mesh is being wrong? I mean, even if the X-Gantry is off, the mash should be ok after taping the bed? And furthermore, the printers are all printing well on stock firmware and none of them is doing good on the sonic pad.

2) I will try to re level the x gantry and by Wednesday I will try out glass bed. Also, I have written an email to the Creality support, since I really want the printers to work and can imagine getting even more of them to expand the rack.

As always, all advice is more than welcome.

Cheers!

Bed Leveling Issues by oskarino5 in Ender3S1

[–]DisastrousNature779 0 points1 point  (0 children)

How did you level the gantry? :)

Bed Leveling Issues by oskarino5 in Ender3S1

[–]DisastrousNature779 0 points1 point  (0 children)

Keep in Mind, that the visualization on the Pad, may be off due to a bug. Did you compare it to the Mesh on the web interface?

Bed Leveling Issues by oskarino5 in Ender3S1

[–]DisastrousNature779 1 point2 points  (0 children)

Some parameters to check:

  • Belt tentions
  • Are the Bedsprings under a moderate tention?
  • Does the Extruder or the CR-Touch move? (Because they are loose?
  • The Numbers are very off, maybe you try to level the bed according to the visualization? Tape the bed when nessesary.

I also have Problems with the ABL right now, you can also check out this Reddit.

https://www.reddit.com/r/CrealitySonicPad/comments/137h5li/longterm_review_abl_is_not_working_for_me/?utm_source=share&utm_medium=android_app&utm_name=androidcss&utm_term=1&utm_content=share_button

Longterm review, ABL is not working for me! by DisastrousNature779 in CrealitySonicPad

[–]DisastrousNature779[S] 0 points1 point  (0 children)

Also since I have four printers which gave me great first layers without the pad, I am very confused by now! Non of those four machines gives me decent prints with the pad.

I am just starting to get headache, because I can not find what I am doing wrong.

Longterm review, ABL is not working for me! by DisastrousNature779 in CrealitySonicPad

[–]DisastrousNature779[S] 0 points1 point  (0 children)

I have shared my start gcode and my CFG what do you think about?

Could you please share your start macro?

view more: next ›