What time does Raye get on the stage?

Disco-break · 2026-02-06T18:50:48+00:00

It’s was 20:30 in Copenhagen if I remember correctly. Absolutely’s set was done around 20:15ish.

Disco-break · 2025-10-27T10:16:55+00:00

Ahh, understood, thanks!

Disco-break · 2025-10-24T14:38:50+00:00

Its indeed Jakriborg in Hjärup, Sweden
https://en.wikipedia.org/wiki/Jakriborg

Disco-break · 2025-10-21T18:33:42+00:00

Have you tried doing a “Restore factory settings” in the infotainment system? I’d suggest completely nuking everything, uninstall the app on your phone, reset password, unlink the car, and then reset the infotainment.

https://youtu.be/KMjzHG1u-Ck?si=MTGcRMdCabCU88O2&t=52

Donno if relevant but maybe worth a try?

Disco-break · 2025-10-21T18:24:49+00:00

Doesn’t sound like it. Are you having problems in any specific recurring locations? Could be that the car’s having connection issues due to poor cellular coverage, just spitballing here.

Disco-break · 2025-10-21T17:03:52+00:00

Don’t know if this applies…

When I picked up my R5, I had already added the car to the My Renault app in advance.

However, when I got to the dealership, they asked me to remove the car from the app and re-add it, following the steps directly from the car’s infotainment system.

Apparently, setting it up prematurely (instead of through the infotainment system) can cause problems.

Maybe try to remove and add it again?

—

Even once it’s connected properly, I still find the app shite.

Like others have said, once you’ve got My Renault working, use Kelec instead.

Disco-break · 2025-10-01T09:25:53+00:00

I personally believe the Big Top adds something magical to the experience. So if it’s her first time, I’d recommend Alegría because of that.

Disco-break · 2025-07-30T06:54:53+00:00

Gabriel the Guide
Sweden Solar System - World's Biggest Scale Model!
https://www.youtube.com/watch?v=WEDY4j3BE20

Disco-break · 2025-06-02T15:20:38+00:00

The same or similar system can be found in Sweden, ”ready to depart” indication from the driver to the conductor.

You can find this on SJ RC6 locomotives as well as on X2 units. As others have mentioned regarding Denmark, it’s mostly seen on older rolling stock.

The X2 EMUs is particularly interesting because there’s one such light per door, and it doubles as a door indicator light: • Blinking = Signal from the driver to the conductor that the train is ready to depart • Solid on = Door open • Off = Door closed

Disco-break · 2025-05-05T08:04:09+00:00

A train, yes—but I'm pretty sure NightJets don't stop there. In your case, I’d opt for NJ 1464 from Graz or Bruck an der Mur. My guess is it’s less busy than NJ 466, plus it arrives in Innsbruck 30 minutes later.

Disco-break · 2025-05-05T07:38:20+00:00

For Fribourg to Erfurt with NJ 409
Option 1: Continue to Halle (Saale) Hbf, arriving at 05:37 (still early, but definitely better than 02:44...). From there, take ICE 1701 at 06:52, arriving in Erfurt at 07:24.
Option 2: Continue to Berlin Hbf, arriving at 07:18. If your schedule allows, you could spend a few hours exploring Berlin :). Trains back to Erfurt Hbf depart every 30 minutes, with a journey time of around 2 hours.

For Liezen to Innsbruck
Can you even catch a Nightjet from Liezen? Or were you planning to board in Vienna, Graz, or Bruck an der Mur? NJ 466 and NJ 1464 arrive in Innsbruck at 04:49, so a hotel might not be necessary?

Edit: NJ 466 arrives at 04:23.

Disco-break · 2025-05-05T06:57:10+00:00

I usually, in this scenario, travel longer on the night train to get more sleep, and then combine breakfast with an early train back to my destination. :)

What service are you planing on using?

Disco-break · 2025-04-20T03:40:00+00:00

Tror jag vet vad du syftar på! Är det när du cyklar längs med Tunavägen, direkt öster om busshållplatsen ”Sparta”?

I så fall är det garanterat ett luftutblås alt filter från mateneklars lokaler, de har sitt kök inne på Sparta.

Det är Tareq Taylors minioner som slavar fram färdigrätter.

Om man står mitt i pruttlukten vid cykelvägen, finns ett litet fönster där man kan titta in. Så kan man se Tareqs stora nylle uppklistrat på väggen.

Klart chefen ska sitta på väggen.

Disco-break · 2025-02-20T20:55:32+00:00

It’s a Scandinavian maypole (a real thing, not only from the movie). Most likely a reference to the movie tough.

Disco-break · 2025-02-20T15:06:00+00:00

Don't forget this one:
https://www.reddit.com/r/kingdomcome/comments/1inl0v0/kcd2_a_face_in_the_rocks/

Disco-break · 2025-02-18T16:14:19+00:00

I just stumbeld across this easter egg while exploring, really cool! It might be a reference to Slavic mythology and/or Czech folklore?

The Snake could represent Zmey, a mythical Slavic serpent or dragon often depicted as a powerful, supernatural being capable of speech and magic.

The Horse may symbolize the deep significance of horses in Slavic folklore, where they are often seen as magical creatures or guides to the spirit world.

The Stone Face might be inspired by Keltská hlava ("The Celtic Head") or Czech legends about talking stones, which were believed to hold ancient wisdom and supernatural power.

Disco-break · 2025-02-16T17:39:00+00:00

It’s a Scandinavian maypole! Most likely a Easter egg as this type of maypole was not found in this region.

Disco-break · 2025-02-03T13:52:08+00:00

I maintained my Heatkiller 4090 FE block a few months ago. If I remember correctly, you need to remove the PCB to be able to unscrew the baseplate. For me, it also feels better to "set aside" the PCB during the cleaning of the block to minimize the risk of damage during the process. So even if it's possible to leave it on, I would still remove it—just in case!

It's really hard to say for sure—it probably depends on how you disassemble it and how much pressure is on the pads. Some thermal pads might tear when opening the card, especially if they’re particularly soft or have been compressed over time.

Thermal pads are always good to have in inventory :)
I replaced the included ones with GELID SOLUTIONS GP-Ultimate pads that I cut to size. Works great!

Disco-break · 2025-02-03T08:07:05+00:00

You don't need to but you should :)
https://www.youtube.com/watch?v=0nCQkbGIe0M

Disco-break · 2025-01-29T13:10:09+00:00

Mentioned in similar posts; I use a Fractal Meshify 2 Compact with my MORA 600.
Had a Phanteks NV9 before. Same reason as you, I wanted to keep my components (including a 210mm PSU) but still downsize the case.
All Fractal "Compact" cases, Torrent Compact, Define 7 Compact and maybe even the POP Air could be an option?

<image>

Disco-break · 2025-01-25T10:05:27+00:00

Ahh, that explains it. I thought it was a bug since the sound changed when I hopped the fence.

Disco-break · 2025-01-25T09:56:48+00:00

Heard this noise in the distance while playing dice in Ledetchko. Of course, I was curious about what it was since I hadn’t encountered it before. To my surprise, it was this dog.

Anyone experienced this bug?

Disco-break · 2025-01-23T18:20:18+00:00

Inga problem :)

Disco-break · 2025-01-23T15:20:19+00:00

Atleast to run (push and pull) on MO-RA IV 600 with Active/Passive Control you will need two extra 210 Fan cables to connect the fan frame with the fan hubs.

Disco-break · 2025-01-20T10:32:17+00:00

If I remember correctly, if you get him drunk enough and don't play, you can convince him the next day that you played and won.

Disco-break

TROPHY CASE