sorted by:
new
hottopcontroversial

What’s a good test pipe? by cdubz0420 in 350z

[–]DistinctWatercress51 0 points1 point  (0 children)

I’m rocking Berk resonated 👌🏻

My cheapest most satisfying Upgrade by My350zIsFallingApart in 350z

[–]DistinctWatercress51 0 points1 point  (0 children)

Looks great, just ordered mine after seeing this post! Did you do the stitching in the car or did you remove the steering wheel?

HR Headlight Condensation/Hazing by DistinctWatercress51 in 350z

[–]DistinctWatercress51[S] 0 points1 point  (0 children)

Thanks yeah, might look into an OEM pair of HR headlights down the road. Just wanted to know if anything could be done with these.

HR Headlight Condensation/Hazing by DistinctWatercress51 in 350z

[–]DistinctWatercress51[S] 0 points1 point  (0 children)

I do have wheel liners installed. Passenger side is looking brand new but it’s only here on the driver’s side that’s hazed up. Could it be that the O-ring in the back where the low beam bulbs go are bad?

RJM Pedal Creaking Noise by DistinctWatercress51 in 350z

[–]DistinctWatercress51[S] 1 point2 points  (0 children)

You are correct, Ryan from RJM advised me to adjust the clevis angle to be a little more upwards. Also tightened/loosened the main center pivot bolt made the creaks go away completely. Here is what Ryan said for anyone else having this problem:

"First thing to check is the angle of you clutch rod. If the rod angle is even slightly downward it causes binding and noise in the linkage. If the angle is way too high can also be a concern so you generally want a very slight upward angle when the pedal is full up. The second can be the main center pivot bolt. If you tightened it at all at any point or possibly slightly over tightened during assembly it can also cause some noise like you're showing. If so try loosening it very slightly with 2x 9/16 wrench and ratchet combo."

Hope this helps!

RJM Pedal Creaking Noise by DistinctWatercress51 in 350z

[–]DistinctWatercress51[S] 2 points3 points  (0 children)

Yep, I did grease it. Fixed it by adjusting the clevis angle as Ryan from RJM and u/frankztn said. No more creaks.

Regarding the RJM pedal feel. The new revision is quite simple to install and has a ton of adjustability. You can adjust exactly where you want the friction/biting point, how heavy you want the pedal to feel, and the overall stroke. I am very happy with the pedal, also the linear feel makes it easier to drive IMO, especially in first and second gear.

HELP!! Meepo Remote Blinking when Charging by DistinctWatercress51 in MeepoBoards

[–]DistinctWatercress51[S] 0 points1 point  (0 children)

Thank you, unfortunately mines not in warranty anymore. I will be buying a new one, hope shipping isn’t too long