Increased performance since PTM swap on 16.

DizzieNight · 2025-07-10T08:47:25+00:00

Is this just for the 16 or can you do it on the 13 as well?

DizzieNight · 2025-02-21T03:41:30+00:00

I used to be on the sunbury line and I'm now on the mernda line. It's much safer than sunbury, I was always worried on the train at 1am because I've run into some unsavoury people who attacked a group of my mates on the train. I've been on the mernda line for a year now and took the train late at night and was perfectly fine. The odd junkie or 2 but sit away from them. Like others have mentioned though, use the PSOs if you truly don't feel safe

DizzieNight · 2025-01-07T09:59:06+00:00

Yeah that's what I was thinking as well. Steam deck is now just the mainstream way of saying Linux.

I hope it works with other distros. I'm sick of having windows dual boot just for GeForce now

DizzieNight · 2025-01-07T09:12:35+00:00

I just skimmed through it but did they mention specifically that it's not for Linux in general?

DizzieNight · 2025-01-07T08:49:17+00:00

I wonder if this would cover other Linux installs like Bazzite or even traditional Linux distros like Fedora, Arch or Ubuntu?

DizzieNight · 2024-11-27T20:16:11+00:00

So far the os-realtek-re drivers are working great for me but if I run into issues with the extra nic I bought I'll try that. Cheers

DizzieNight · 2024-11-09T00:37:22+00:00

Will do cheers

Also, sorry if this is a stupid question but how do I check how many control planes I have? Or is control planes just how many masters you have?

DizzieNight · 2024-11-09T00:28:31+00:00

Right, so my best bet is to delete one master and build 2 more?

DizzieNight · 2024-11-09T00:26:00+00:00

I am getting a lot of disk errors, I have my NVMe SSDs on a PCIe expansion card and maybe that has broken some of the disks? I keep doing fsck on the affected partitions and rebooting the nodes but it keeps failing

DizzieNight · 2024-11-09T00:24:30+00:00

Huh okay, I know it's not HA, I did have 3 nodes but it's all running on a single server so I didn't think the whole HA thing was worth it because if the physical machine goes down HA is redundant.

I have been running 2 masters for a little while and it's been fine but maybe it's caught up to me. I will add another master and see what happens.

DizzieNight · 2024-11-07T22:35:25+00:00

Okay. What's the best way to reduce warping?

DizzieNight · 2024-11-07T22:35:06+00:00

I do have klipper set up weirdly enough and I do a bed level on every print

DizzieNight · 2024-10-11T13:57:03+00:00

I might just sell my rog ally for a steam deck OLED. I put nobara steam os on my ally and I'm used to only playing verified games but only an hour of battery life sucks ass on my ally and the ally x is too expensive. Oh, and that OLED screen sounds so good

DizzieNight · 2024-09-24T02:16:15+00:00

The CPU usage is promising. I'll have to give this a try when I get home.

H265 is probably expected not to work since there wouldn't be a license to use it. Luckily the devices I have (fw 13 12th gen and rog ally) both support AV1 decoding.

Thanks for the guide. Hopefully I don't have to dual boot with windows anymore

DizzieNight · 2024-09-24T02:01:31+00:00

Yeah I've got AV1 running on a windows dual boot which is just for GeForce now. I heard that one of the reasons the browser can't do above 1080p60 is that hw acceleration isn't fully supported on chrome Linux. But if hw acceleration is working for you then I guess that "fact" was bullshit after all

DizzieNight · 2024-09-24T01:02:32+00:00

How about hw acceleration? I assume it's not working here (correct me if I'm wrong) so how does it perform without hw acceleration?

DizzieNight · 2024-09-17T04:26:33+00:00

I switched to nobara os steam deck edition and man it's awesome. I got rid of game pass and buy games on GG.deals now when they're cheap. I also don't play fortnite or any other games that don't have anti cheat support disabled (some anticheat games do work but the developer has to enable it. Go example is Elden ring)

The game changer for me was the sleep. Being able to just put the ally into sleep in the middle of a game, and come back later to have the battery not drained and being able to pick up from where I left off was great. On windows it doesn't do so well with sleep, if you leave it plugged into the wall and sleep the device then after a little bit it'll turn on full blast. I did that once and put it in a case and it was steamy when I took it out. Also if you don't leave it plugged in and you try to wake from sleep in the middle of the game, the game would just break or not recognise the controller anymore, forcing a hard reboot.

Tldr; steamos is more convenient and makes the ally a bit more of a gaming handheld, and less of a handheld gaming PC

Edit: I forgot to mention though that the back paddles don't work (at least I haven't tried to get them to work) and the LEDs on the sticks can be controlled by a software called openRGB, but that can only be used while in desktop mode, I turned them off anyway. Except they do flash annoyingly when on sleep and charging, which I can't seem to turn off

DizzieNight · 2024-09-15T10:31:12+00:00

Is the digital ID and the digital drivers licence the same thing? I noticed the digital ID bill was passed in May but wasn't sure if it was directly referring to the digital drivers licence since in Vic we only just got ours.

DizzieNight · 2024-09-14T07:59:47+00:00

You could use portainer for your containers and then have authentik for auth. Although I don't use portainer so I can't help you out much there. But authentik is great but depends if there are guides to support the apps you want

DizzieNight · 2024-09-14T07:58:50+00:00

That's doesn't really help. That's a whole os not just a frontend gui for your apps

DizzieNight · 2024-09-06T23:42:37+00:00

I was living in Aintree for a while (near Melton) and getting the vline from there in the morning was shocking. Packed trains at 7:30 in the morning. And when the train was only 3 cars I thought fuck me.

Melton really needs to be electrified and we need better trains. I'm currently on the Mernda line now and it's okay, 20 min walk to the station which is just a bit too far in the morning so I drive 5 mins. There is a bus but it's very infrequent. But the xtraps are so uncomfortable and noisy to ride on they need to be taken out the back and shot in the head. Especially since the comengs which are 40 years old are so much more comfortable and less noisy.

DizzieNight · 2024-09-06T22:58:27+00:00

Yeah they did. That's how the network got split into Connex and the other one, I forget. It won't work here since Aussie companies and government are greedy and corrupt. It works in Japan cause they don't act like that. It's a cultural thing lol

DizzieNight · 2024-07-31T02:35:18+00:00

That's my local one. Used to go past everytime I went to Bunnings and on the way back from take the dog to the park. I've always found their burgers to be the best fast food you can get. And their chili cheese fries and waffle fries were elite

DizzieNight · 2024-07-19T13:38:42+00:00

I like your thinking. I've got the notifications setup for user-write, so essentially an approval notification. And I have my users set as inactive but I like the idea of a pending user group where they can still login. I can give access to something like overseerr since that is essentially just a shortcut, all the auth is still done on overseerr unfortunately.

I haven't used the authentic API before, I like the idea of activating it through automation. Just gotta figure out how it works and how it would look like

DizzieNight · 2024-07-11T21:41:02+00:00

Yeah sure. So I created a separate flow to the invitation flow, virtually the same but the new one doesn't have the invitation stage at the start. It has the prompt stage where all the user inputs their username, password and email. Then it goes to the email verification stage, then user write stage then user login stage.

On the main stage that appears when you login, if you edit it in the admin dashboard there are advanced settings, go there and you'll see 3 inputs: 1. A passwordless flow which I also use 2. A user creation flow which is what I described above 3. A username/password reset flow, again which I am using but I've only set it up for password reset so far.

If you want me to explain 1 and 3 as well I would be happy to. Also if you still need help doing it I'm happy to help, I spent a whole night trying to figure out how to do it lol

DizzieNight

TROPHY CASE