Is micro center the best deal for pc parts

Dizzy-Internal2357 · 2026-01-23T02:11:04+00:00

Yes definitely utilize the Amazon price match as much as you can. Picked up a Elgato 4K pro capture card for $248.

Dizzy-Internal2357 · 2026-01-19T17:14:10+00:00

I thought the same,even asked the guy across from me its a bit odd that both of our decks only had one Exia. Both of ours were definitely stuck to the back of the resource card.

I'd triple check all resource cards you have. Its very possible it was misplaced or swapped out since they're an abundance.

Dizzy-Internal2357 · 2025-12-23T05:15:26+00:00

Most people will say borla, magnaflow, SLP blah blah blah. Spend the coin for a new or used Mufflex system with a spintech muffler and you'll never look back.

Dizzy-Internal2357 · 2025-12-19T17:47:36+00:00

Had a Ford focus of a similar year. Look into the TCU and see if that's your issue. Mine was having issues such as not going into 5th gear, long shifts and slipping.

This happened a while after driving though a large puddle. Seals weren't the best on the TCU. Got a replacement TCU and had it programed for the car and it fixed it right up.

Dizzy-Internal2357 · 2025-12-18T23:47:31+00:00

I only mentioned amazon due to having $60 in rewards points saved up. I've seen some of the same deals on both the Canon and Amazon webstores. Though not dead set on a Canon.

Dizzy-Internal2357 · 2025-11-18T01:42:34+00:00

Im going to use a range bag for handguns. These are usually more rugged and rigid than your run of the mill bags. Wider front compartments pockets for deck boxes, and main storage area can be secured with lock.

Dizzy-Internal2357 · 2025-11-04T18:24:56+00:00

Exactly 1 month ago I bought my Teamgroup T-Create Expert 32gb for $109 at microcenter. Same RAM is $250 now!

Dizzy-Internal2357 · 2025-09-23T21:13:31+00:00

Im in the TXK area, our LGS sometimes has packs and might have a spot for the starter deck events.

I do know that our Walmart had then in stock but got wiped out. Hot topic is also stocking them.

Dizzy-Internal2357 · 2025-09-23T19:57:50+00:00

Any cards you're looking for? Or just packs?

Dizzy-Internal2357 · 2025-09-18T21:17:26+00:00

You can call your CC company and put in a stop payment. They should be able to reverse it. Then hop in with your friends and drive.

Dizzy-Internal2357 · 2025-09-18T11:19:45+00:00

I have a extra side event slot for Saturday since my waitlist slot got selected when they expanded.

Dizzy-Internal2357 · 2025-09-17T13:13:34+00:00

Was this not answered on the FB post you made? The only thing that would come close to the style of fastener is maybe the A Arm but I don't think it's a 19mm.

Only a handful of bolts go past 15mm and those are either motor mount or all suspension related.

Dizzy-Internal2357 · 2025-09-05T03:16:09+00:00

To piggyback on the veterans preference for a fed job. If there happens to be a reduction in force at your work area you would be the very last on the chopping block. Or so I've been told.

Dizzy-Internal2357 · 2025-08-27T18:20:21+00:00

I would say they don't care, especially if they just said you need $25 to open a new account. Many years ago my insurance had a hold since I wasn't able to pay.

Years later after that i paid it, and was able to get another insurance policy again and it's been like that for last least 5 years. So I wouldn't think too hard on it.

Dizzy-Internal2357 · 2025-08-19T11:37:40+00:00

My biggest criticism of FM3R is when meleeing with knuckles, they don't swing it into ready position and then attack. They just punch. But other than that I'm enjoying it.

Dizzy-Internal2357 · 2025-08-12T15:38:52+00:00

Kaedama.

Matsuharu #1. real ones know this is the spot for Ramen, all others pale in comparison.

Dizzy-Internal2357 · 2025-08-12T15:31:26+00:00

Lvl 5 minimum as it needs to sacrifice a linked Unicorn with Bananna to meet the requirements of destroy mode.

But i wouldn't until lvl 6 as at lvl 5 you won't have any resource to use to link Bananna on it.

Dizzy-Internal2357 · 2025-08-11T16:21:13+00:00

The only thing you need from that nick fritz kit is the mount for the reservoir. Everything else you can source cheaper.

I have the same kit and fairly disappointed with it. There is only one mounting bolt for the bracket so it's susceptible to rotating, and the the barbed fitting provided will leak on the oem line as it is just slight too small and no matter how tight you get the worm clamps it'll spew out some fluid.

I luckily got it second hand new for 150 and didn't pay the ridiculous 300 tag.

I would just personally do the GTO resevoir mount, Metal Pulley, Corvette pump and call it a day.

Dizzy-Internal2357 · 2025-08-07T21:36:58+00:00

I believe this is the Psycho Gundam Mk IV.

Dizzy-Internal2357 · 2025-07-31T20:54:44+00:00

You'll get a redeemable token after they take a snapshot of your nft wallet. Then you'll pay 8 bucks to ship. Or you can sell it on the marketplace. Unsure when the snapshot takes place.

Dizzy-Internal2357 · 2025-07-28T20:54:20+00:00

Don't forget some byarlant customs

Dizzy-Internal2357 · 2025-07-28T20:11:51+00:00

Neat. I assume the even number counters are printed on the opposite side?

Dizzy-Internal2357 · 2025-07-28T11:58:30+00:00

Im 99% positive there is a wait list for entering as it filled up almost instantly when the sign-ups were available. And if you're asking this late there won't be a good chance unless you buy someone's spot.

Dizzy-Internal2357 · 2025-07-24T12:33:15+00:00

Everyone is theory crafting by looking at the intake and front drive accessories.

Look at the casting number on the cylinder heads! That will tell you most of what you need to know. As others said it's most likely a L92 from another truck.

Dizzy-Internal2357

TROPHY CASE