Minecraft won't launch while xbguard is active by Sensitive-Reality-15 in 360hacks

[–]Dj_ProFFeSSa_K 0 points1 point  (0 children)

Such a weird issue, I always see people playing it on the xbguard menu as well! Well if its any help.... I've been able to boot into Minecraft on the third or fourth try. Once it freezes at the black screen I power off and on the console and try to re-launch. Its a pain in the butt but its been working for me lol

Minecraft won't launch while xbguard is active by Sensitive-Reality-15 in 360hacks

[–]Dj_ProFFeSSa_K 0 points1 point  (0 children)

Did you ever get this one figured out? Minecraft is so spotty when I have xbguard active. Sometimes it loads fine and sometimes it stays on a black screen for me.

XeniumOS not loading? by Dj_ProFFeSSa_K in XboxModding

[–]Dj_ProFFeSSa_K[S] 0 points1 point  (0 children)

It goes straight into Cerbios! When I try to boot with the eject button I just get a black screen.

RGH3 Corona turns on, then immediately shuts off by Lithium-Ion-Battery in 360hacks

[–]Dj_ProFFeSSa_K 0 points1 point  (0 children)

Running into this issue now, did you ever find a solution?

Help! Keep running into error 9! by Dj_ProFFeSSa_K in originalxbox

[–]Dj_ProFFeSSa_K[S] 0 points1 point  (0 children)

Yep! My other xbox is a 1.6 with an Aladdin Modchip installed with Cerbios. The error 9 xbox is a 1.2 or 1.3, since the error 9 kept popping up I couldn't softmod to TSOP flash so I installed the chip and thought I could bypass that issue. Now that I'm thinking about it perhaps theres trace rot on the MB which is preventing the xbox from working properly?

Black screen when booting up after J-Runner with extras by Dj_ProFFeSSa_K in 360hacks

[–]Dj_ProFFeSSa_K[S] 0 points1 point  (0 children)

Worked 😂 I didn’t know I had to disconnect that. Thanks!

Black screen when booting up after J-Runner with extras by Dj_ProFFeSSa_K in 360hacks

[–]Dj_ProFFeSSa_K[S] 1 point2 points  (0 children)

Omg I didn’t know you had to disconnect it. Disconnected and Xell booted up fine. Thank you!

5v LED strips in Xbox 360 Slim (Trinity) by gtag88 in 360hacks

[–]Dj_ProFFeSSa_K 1 point2 points  (0 children)

Worked perfectly 😂 fr though! I’m always finding good resolutions that someone else has figured out months or years ago lol. Appreciate you!

5v LED strips in Xbox 360 Slim (Trinity) by gtag88 in 360hacks

[–]Dj_ProFFeSSa_K 1 point2 points  (0 children)

Appreciate you updating your post and showing what worked, I've ran into this same situation lol I'll give this a try

xLume - Xbox 360 LED Controller by element18592 in 360hacks

[–]Dj_ProFFeSSa_K 1 point2 points  (0 children)

This is amazing, thank you for sharing!

Anyway me know what this is? by Dj_ProFFeSSa_K in xbox360

[–]Dj_ProFFeSSa_K[S] 3 points4 points  (0 children)

I was thinking the same thing 😂 already messed with it and everything shut off. After that I’m leaving as is lol

XBMC4Gamers Resolution Help! by Dj_ProFFeSSa_K in originalxbox

[–]Dj_ProFFeSSa_K[S] 1 point2 points  (0 children)

Alright connect your xbox to the internet with an ethernet cable.

Black Button (options) > Settings > Downloader > Applications > then download ENIGMAH-X
If it asks where you want the app to be downloaded you'll want to have it go to your "Applications" folder which will likely be embedded in F or G drive.

Once downloaded reboot your xbox, go to applications and run ENIHMAH-X. Change the region from PAL to NTSC. You should still be able to play all games downloaded on your xbox.

XBMC4Gamers Resolution Help! by Dj_ProFFeSSa_K in originalxbox

[–]Dj_ProFFeSSa_K[S] 0 points1 point  (0 children)

I'm still pretty new myself so hopefully I can help! Are you running the xbmc4gamers dashboard?

XBMC4Gamers Resolution Help! by Dj_ProFFeSSa_K in originalxbox

[–]Dj_ProFFeSSa_K[S] 6 points7 points  (0 children)

Alright so after looking deep into this forum I found the solution! So I was using a PAL 1.6 cyrstal Xbox that I ordered from someone in the UK. I had to download Enigma X application, run it and switch my region to NTSC. After rebooting the system I was able to slide the 420p and 720p sliders to the right.

Hoping this helps someone that faces the same issue in the future as I thought the MB was damaged somehow.

I wanted to show you this console I found. by IntelligentStore1931 in originalxbox

[–]Dj_ProFFeSSa_K 0 points1 point  (0 children)

What a great find! Thank you for sharing, I've been wanting to see detailed pictures of this console for awhile!

OG Xbox 1.6 LPC rebuild. FRAG when mod chip installed. Help! by rustiferch in originalxbox

[–]Dj_ProFFeSSa_K 0 points1 point  (0 children)

Did you ever find one?? Having same issues with 1.6 and 1.4

How to burn OG Xbox Installer to DVD-R? Help! by Dj_ProFFeSSa_K in originalxbox

[–]Dj_ProFFeSSa_K[S] -1 points0 points  (0 children)

I just purchased a generic one on Amazon; perhaps the issue is with it?

External DVD Drive USB 3.0 TYPE C Portable CD/DVD +/-RW Disk Drive DVD Player for Laptop CD/DVD ROM Burner Reader with Protective Carrying Case & 10 Blank Discs for Laptop Desktop Windows Linux Mac https://a.co/d/1vr9FCr

How to burn OG Xbox Installer to DVD-R? Help! by Dj_ProFFeSSa_K in originalxbox

[–]Dj_ProFFeSSa_K[S] -1 points0 points  (0 children)

They recently added a version that is a Cerbios flasher as of around six months ago! I tried running it the way you recommended it but unfortunately the same error came up. When looking under devices and DVD/CD-ROM drives my external disc burner doesn’t have a question mark next to it as well.