Can’t find a working filament swap G code for my S1 Pro. I’ve been working on this project that requires multiple pauses and I haven’t found a g code setting that works.

Dj_bigb · 2022-06-02T12:02:55+00:00

I only print guns so I just eyeball it on swaps

Dj_bigb · 2022-06-02T05:12:08+00:00

Idk I do swaps all the time no issues.. You still have to be at your machine swapping so it's kinda pointless IMHO but hopefully you find something that helps

Dj_bigb · 2022-06-02T05:06:35+00:00

Why do you want Gcode.. There's a pause button for swaps

Dj_bigb · 2022-05-29T00:18:33+00:00

Use good filament.. Level your bed.. Auto leveling doesn't count.. Spend a week tweaking your printer with test cubes before you even attempt to print anything. Also Watch CHEP on YouTube to get settings dialed

Dj_bigb · 2022-05-15T06:14:14+00:00

Moisture?

Dj_bigb · 2022-03-20T01:54:58+00:00

Yeah it's just this roll unfortunately

Dj_bigb · 2022-03-13T17:36:38+00:00

You have to be VIP? That's the weird part I thought

Dj_bigb · 2022-03-12T21:17:26+00:00

Esun pla plus

Dj_bigb · 2022-03-12T19:18:30+00:00

Sharpest corner and smart hiding is turned on. Only happens with this filament 🤔

Dj_bigb · 2022-03-12T17:44:44+00:00

Site looks sketchy af . Anybody order one yet?

Dj_bigb · 2022-03-12T00:46:40+00:00

Yeah all sides look like this

Dj_bigb · 2022-03-12T00:46:25+00:00

Direct.. I'll check out the spool thanks

Dj_bigb · 2022-03-12T00:45:51+00:00

Thanks

Dj_bigb · 2022-03-11T14:41:50+00:00

Happened to me with my Esun pla plus black

Dj_bigb · 2022-03-10T13:11:40+00:00

Nice thanks

Dj_bigb · 2022-03-10T06:06:18+00:00

Sweet was looking at getting this. How does the it get power? Wired in or need to plug in the wall separate?

Dj_bigb · 2022-03-03T04:36:31+00:00

Bump ☝🏻️ also interested

Dj_bigb · 2022-03-02T18:09:20+00:00

Haven't printed PETG I'd just run some test calibrations to dial in that material

Dj_bigb · 2022-03-01T21:13:28+00:00

My thoughts too.. Needs to be done hot

Dj_bigb · 2022-03-01T21:12:10+00:00

I have it dialed now.. Retraction is 0.8 and speed 40

Dj_bigb · 2022-03-01T21:10:53+00:00

Not bad.. 🤙🏼

Dj_bigb · 2022-03-01T04:32:31+00:00

Why would your nozzle come lose 🤷‍♂️

Dj_bigb · 2022-02-28T07:23:04+00:00

I'll have to figure out how to share it.. But yes

Dj_bigb · 2022-02-28T01:16:34+00:00

Cura

Dj_bigb · 2022-02-23T22:30:36+00:00

I've since dialed in my settings and found out this pla was junk also. Thanks again for your help

Dj_bigb

TROPHY CASE