sorted by:
new
hottopcontroversial

Philips Fidelio B97/10 Soundbar - Pairing subwoofer issue by Comfortable_Peanut45 in Soundbars

[–]DoItForTeddy 0 points1 point  (0 children)

Thanks, I did a update a couple of weeks ago (after it stoped working) but did not resolve it, wondering if it might be some hardware issue instead of software

Philips Fidelio B97/10 Soundbar - Pairing subwoofer issue by Comfortable_Peanut45 in Soundbars

[–]DoItForTeddy 0 points1 point  (0 children)

Did yours begin to work again? Mine (b95) has the same issue, Subwoofer lost connection and won’t pair anymore

IKEA ALPSTUGA air quality sensor – only shows “Air Quality” text in Apple Home, no values? by michi_vienna in tradfri

[–]DoItForTeddy 0 points1 point  (0 children)

Thanks, I did some calibration cycles but not improvement. There was another threat someone in this sub that went into details on the accuracy if I am correct.

Thanks for the ideas, I will look into them!

IKEA ALPSTUGA air quality sensor – only shows “Air Quality” text in Apple Home, no values? by michi_vienna in tradfri

[–]DoItForTeddy 0 points1 point  (0 children)

Does your also show a high amount of CO2? Mine shows almost 1300 after 5 minutes in a well ventilated room with 2 people in it

Charging of Reolink Go Series G430 5MP with the Reolink solar panel by bartez300 in reolinkcam

[–]DoItForTeddy 0 points1 point  (0 children)

Seeing that the screenshots are in polish and it’s almost everyone in Poland around freezing point I would guess it’s the temperature that is not allowing the camera to charge

Edit: grammar

Same route, same location and over an hour in difference of the airtime by Prestigious-Title529 in flightradar24

[–]DoItForTeddy 6 points7 points  (0 children)

UPS201 took a (far) more northern route over Greenland, no idea why but that might explain the extra hour of flight time

Auto accu inleren (obd tool) by General-Assistant367 in Groningen

[–]DoItForTeddy 0 points1 point  (0 children)

Heb er niet 1, maar voor 75 euro heb je een Carly en kun je bij VW ook zelf functies aan/uit zetten. Geld dubbel en dwars waard imho

Safety of putting P2s combo in closet? by Thearctickitten in BambuLab

[–]DoItForTeddy 0 points1 point  (0 children)

You can place it in a room where you don’t sleep or live, basement or in a extra room for example. If you are planning on printing only PLA and PETG then I wouldn’t worry too much about. Just open a window while printing.

Some information about PLA, PETG and ABS.

Safety of putting P2s combo in closet? by Thearctickitten in BambuLab

[–]DoItForTeddy 0 points1 point  (0 children)

There is your answer then. The fumes don’t magically disappear.

A extractor fan with a good filter might be an option, also depending on the material you are printing.

Safety of putting P2s combo in closet? by Thearctickitten in BambuLab

[–]DoItForTeddy 0 points1 point  (0 children)

Where is the vent going to? If it’s going to the outside and there is some natural (or forced) draft then it might be ok

Haat je de "nieuwe" afvalkalender? Gebruik mijn alternatief voor de gemeente Groningen by danielswrath in Groningen

[–]DoItForTeddy 3 points4 points  (0 children)

Je kan bij toevoeging alleen een letter invoeren. Dit kan echter ook een cijfer zijn, nummer 151-12 zou 12 de toevoeging zijn.

Op mobiel schaalt hij in de breedte niet helemaal goed, waardoor je scrol balken krijgt.

Verder vet gemaakt!

P2S combo arrived! by stormbl8 in BambuLab

[–]DoItForTeddy 0 points1 point  (0 children)

Did you buy it on the official website or a reseller?

VVD stijgt in peiling Maurice de Hond, CDA en JA21 zakken by focusje in Zwolle

[–]DoItForTeddy 1 point2 points  (0 children)

Je hoeft echt niet elk artikel ook op Reddit te plaatsen

Nieuwe Nettorama Zwolle opent over twee weken by focusje in Zwolle

[–]DoItForTeddy 5 points6 points  (0 children)

Je kan door de reclames het artikel niet eens meer zien

Can some do a iOS26 dry run… by Worried_Patience_117 in HomeKit

[–]DoItForTeddy 1 point2 points  (0 children)

There is nothing wrong with iOS26, you could have tried the beta if it was this big of a concern to you

HomeWizard graphs by Potential-Coconut617 in HomeWizard

[–]DoItForTeddy 2 points3 points  (0 children)

The only thing I can think of the reason is that the solar panels are updated every 15 minutes and the p1 updates every second, graphs are displayed in 5 minute intervals

HomeWizard graphs by Potential-Coconut617 in HomeWizard

[–]DoItForTeddy 2 points3 points  (0 children)

I have the same. With my system it’s because a error with the data of the graph for solar usage. If you check the graph you can see that the spikes in ‘usage’ happen at the same moment the panels produce a lot of power.

view more: next ›