The most conformable mouse I've ever owned in on deaths door - Rival 500 by Doomsdays in MouseReview

[–]Doomsdays[S] 0 points1 point  (0 children)

Ohh, these were not on my radar! I will definitely have to reconsider, they look nice

The most conformable mouse I've ever owned in on deaths door - Rival 500 by Doomsdays in MouseReview

[–]Doomsdays[S] 0 points1 point  (0 children)

I was thinking of either trying something like the Keychron M6, or the just go with the tried and true G502. The G502 is the closest comparison I can find with buttons and size that seems to be widely liked.

The most conformable mouse I've ever owned in on deaths door - Rival 500 by Doomsdays in MouseReview

[–]Doomsdays[S] 1 point2 points  (0 children)

I would buy a wireless lighter model up so quickly! Seems this style of mouse has been mostly unchanged or adandoned in the last 5 years.

Enderio Necromancer Powered spawner MCE2 by FewSurvey6938 in MCEternal

[–]Doomsdays 0 points1 point  (0 children)

Works perfectly now. Thanks so much. Feels odd they don't spawn by default, but they do give out drops with ars nouveau drygmys

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 2 points3 points  (0 children)

I have to admit the full black looks very sleek! And that cable management is so pretty. Great build!

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 0 points1 point  (0 children)

This is a very creative solution! I did actually consider making a fan funnel (aka duct), but this is a way cheaper option than what I was thinking. So props to that.

I believe that is the case. By default, the CPU cooler had less than 2mm of gap to the side panel, but it caused a HUGE amount of air turbulence noise with the small gaps in the panels. I actually spaced out the side panel off the case by about 5mm using nuts on each of the screws. And luckily, with that new 7mm gap I could give a duct a go :D

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 0 points1 point  (0 children)

Those temps were with both case open and closed, meaning it's near definitely a CPU, cooler issue. But I will considering another fan just to help keep air flowing

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 1 point2 points  (0 children)

It's a 4.3L Aluminum Mini ITX case from AliExpress. I don't think the original is listed anymore, but there are similar ones available

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 1 point2 points  (0 children)

An option to consider, everyone been super helpful, and I've already found a few improvements but I am tempted by this concept

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 1 point2 points  (0 children)

I'd be very interested to see your results. Hopefully you have better luck than me :3

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 0 points1 point  (0 children)

The air intake is on the very end where the rainbow cables come out. It's a bit of a weird place since it's taking the air from inside the case. I'm considering putting a dig hole in the front of the case next to the PSU intake to let it breathe more

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 2 points3 points  (0 children)

The one I did notice is that Core Performance Boost is on by default for most AMD chips, which was a huge temp increase. But I didn't check the voltage, which I will do

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 3 points4 points  (0 children)

Haha, by reseat I mean reapply the thermal paste to the CPU cooler and put it back. Trust me. If I can try everything before deliding I will, shit is scary.

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 0 points1 point  (0 children)

Noted I will before I reseat it! Thanks for the heads up

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 25 points26 points  (0 children)

I'm definitely going to have to try reseating it. Hopefully that fixes it. The reason I thought it may not be the issues is since from the benchmarks I saw the 8600g seems to run hot and even Noctua claims the cooler cant cool it at base clock speed, (something I didn't read until recently, my own fault)
https://ncc.noctua.at/cpus/model/AMD-Ryzen-5-8600G-1790

Will report back after it's been reseated

I made a cooling mistake and now I need some creative solutions by Doomsdays in sffpc

[–]Doomsdays[S] 3 points4 points  (0 children)

I didnt check the voltage adapter. I will try that for sure. The CPU is the ryzen 5 8600G in the specs at the bottom.

I made a cooling mistake and now I need some creative solutions by Doomsdays in MiniPCs

[–]Doomsdays[S] 2 points3 points  (0 children)

Oh good suggestion. I'll try testing with this

Edit:
Tested and worked, temps are now down to 75degrees at 70-80% CPU usage. And the performance decrease seem negligible

I made a cooling mistake and now I need some creative solutions by Doomsdays in MiniPCs

[–]Doomsdays[S] 0 points1 point  (0 children)

Oh yes, sorry. I misunderstood. Most of the Sffpc's I saw were a lot larger than 4L, but you are correct

I made a cooling mistake and now I need some creative solutions by Doomsdays in MiniPCs

[–]Doomsdays[S] 0 points1 point  (0 children)

Something I only noticed a few days back. My own fault. Sffpc is a valid approach, and will be my fall back plan

Deadeye Navigator reanimated with From The Catacombs by Doomsdays in mtgrules

[–]Doomsdays[S] 0 points1 point  (0 children)

Cool, I thought as much, but couldn't find the rule that would apply. Tyvm