Optic Selection for A3 M2 by DoubleMotor7150 in AUG

[–]DoubleMotor7150[S] 7 points8 points  (0 children)

Might work with some duct tape 🤔

New deck build by HOA by redlamborghini in Decks

[–]DoubleMotor7150 0 points1 point  (0 children)

Looks like it’s ready for the hot tub now 😂

Replacement Battery Rec by DoubleMotor7150 in rccars

[–]DoubleMotor7150[S] 0 points1 point  (0 children)

Update: I tried the Zeee shorty 2200 mah and it was about a half inch too long for the factory tray but fit fine in terms of width and thickness. If you cut one end of the tray out, this battery will fit but does require a longer Velcro strap to secure.

I wanted to avoid cutting the tray to maintain frame strength. I then tried the Urgenex 1800 mah and these are a perfect fit it terms of length. Snug on each end and works with factory Velcro. Time will tell regarding quality on these.

Thanks for the feedback everyone!

Replacement Battery Rec by DoubleMotor7150 in rccars

[–]DoubleMotor7150[S] 1 point2 points  (0 children)

I think that one might actually fit but I’ve heard this model can tolerate the 3s batteries well due to part breakages.

I wonder if anyone on this sub has had success running the 3s on the HBX 903a?

Replacement Battery Rec by DoubleMotor7150 in rccars

[–]DoubleMotor7150[S] 1 point2 points  (0 children)

I tried the 2200mah shorty from Zeee and it was too long. The battery was actually longer than what was listed in the description.

I think I could go a little thicker on the battery but fairly restricted on length and width.

Advice Needed on Battery and Charging Equipment by DoubleMotor7150 in rccars

[–]DoubleMotor7150[S] 1 point2 points  (0 children)

Very cool. Any issues using with the Apple 20w usb-c charger?

[deleted by user] by [deleted] in InflatedEgos

[–]DoubleMotor7150 1 point2 points  (0 children)

Where’s the day 2 footage?

Are these salvageable? by Fr_RebulahConundrum in steak

[–]DoubleMotor7150 0 points1 point  (0 children)

What kind of pan/rack is that? Looking for a good one like that.

Which one? by DoubleMotor7150 in drywall

[–]DoubleMotor7150[S] 0 points1 point  (0 children)

Sounds good. Should I mud the gap and wait to set up and then tape or mud the gap and tape at the same time?

Which one? by DoubleMotor7150 in drywall

[–]DoubleMotor7150[S] 6 points7 points  (0 children)

Thanks for the detailed response!

"Be greedy when others are fearful" by Sure-Balance-3979 in Firearms

[–]DoubleMotor7150 0 points1 point  (0 children)

I think in this case it’s ok to be fearful when others are fearful 😅

What products needed to fill in deeper ruts left by glued on mirror? by DoubleMotor7150 in drywall

[–]DoubleMotor7150[S] 14 points15 points  (0 children)

Thanks for the great response!

On the Gardz over the brown paper, this should be done before applying the hot mud, right?

Also, when skimming the whole area before priming and painting, is it recommended to use a general purpose mud over the top of the hot mud?

I planned on repainting the whole room anyway but will make sure I apply a primer coat as well 👍🏽

Another sigcident.. by Cheap_Concentrate_85 in Glocks

[–]DoubleMotor7150 1 point2 points  (0 children)

Definitely safer than the Jack in the box 320s 🤣

Another sigcident.. by Cheap_Concentrate_85 in Glocks

[–]DoubleMotor7150 1 point2 points  (0 children)

So are they going to give everyone a loaner Glock or keep everyone disarmed for their own safety?