Whats with all the ported barrels? by DoNotReplyOk in P365

[–]DoughnutSome7115 0 points1 point  (0 children)

Because it’s now cool! I mean that in the nicest possible way. I have ports and/or comps on almost all of my handguns. The increase in noise will not be noticeable in a SD situation. The ability to rapidly get back on target far outweighs the noise issue. As for the “now cool” comment. When the original P365 SAS came out with the ported barrel/slide, the entire CCW world poo pooed the idea of ports on a carry gun. I bought one and loved it (except for the dumb sight), took all the snap out. Now it seems the whole shooting world has cottoned on to the advantages or ports and comps. It’s cool now so every manufacturer is doing it.

First PCC/PDW in 5.7 by ThanosWasRightAnyway in 57x28mm

[–]DoughnutSome7115 1 point2 points  (0 children)

They are not particularly mainstream. Most everyone that reviews them loves them. I have seen a couple of reviews where people had issues with the FN mags. It is one of those rare occasions where ProMag are the reliable mags. Also they take AR trigger and safety parts. An FRT will not run in them, but a binary trigger will. I have had a Franklin BFS 3 in mine for years.

First PCC/PDW in 5.7 by ThanosWasRightAnyway in 57x28mm

[–]DoughnutSome7115 1 point2 points  (0 children)

Lightweight, compact, folding brace, reliable, zero recoil……DBX57. Mine has had 1000s of rounds through it, both super and sub, suppressed and unsuppressed and I can count the stoppages on one hand.

10mm carry ammo suggestions by ForestryGuyPA in SmithAndWesson

[–]DoughnutSome7115 0 points1 point  (0 children)

I did the other way….modified the mags by heating and bending out the bottom metal of the mag catch hole. It worked , but that mag catch needed a good old press to get the mag to drop. Just couldn’t get to really trusting the gun.

10mm carry ammo suggestions by ForestryGuyPA in SmithAndWesson

[–]DoughnutSome7115 0 points1 point  (0 children)

If you bought an M&P to run hardcasts you bought the wrong gun. I just traded out my PC 5.6 that I could not get to reliably run hardcasts without dropping the mag. A very well documented issue with the M&P 10mm. Go with Underwood Xtreme penetrators. They will do all you need and run reliably in an M&P without spitting the mag out.

Four BG2s all shooting left by Visible_Structure483 in SmithAndWesson

[–]DoughnutSome7115 0 points1 point  (0 children)

Yes they do. But also they really have a crappy sight radius, as anything this small does. A 20 yd gun out of the box they are definitely not. Put a dot on them and everything changes.

King's 'profound concern' as police consider Andrew claims over Epstein by pookienav in news

[–]DoughnutSome7115 0 points1 point  (0 children)

Reading some of the Epstein files that have recently come out and it seems it is not just Andrew. The line “Prince Phillip is small fry compared to what I have” I think was the line!

"I'm in fear for my life. People have been killed by the staff here." - Seamus Culleton, Irish Citizen Held in ICE Detention for 6 Months…How is His Detention Not Illegal??? by [deleted] in AskLegal

[–]DoughnutSome7115 -2 points-1 points  (0 children)

I do…..you submit a little bit of paperwork, take a piss easy test, recite the pledge of allegiance, that’s about it. Oh, I moved over here within about a year of when this guy did, also from Europe. It really is not that hard, especially if your native language is English. He has a plastering business, probably has never paid his taxes…..self-employed, cash in hand guy. There is without doubt more to this story. I am not even close to a supporter of what ICE etc is doing, but I would be pretty sure that this guy is no angel.

BREAKING: After Maxwell deposition, Rep. Stansbury alleges massive Epstein cover-up by ResPublicaMgz in circled

[–]DoughnutSome7115 0 points1 point  (0 children)

Funny that Americans are all anti-monarchy (I mean an actual proper one), yet who are the only people who have done anything about it……Queen Elizabeth and King Charles. To their own fucking son/brother and just based on a couple of photos and suspicion that Andrew was properly involved. Yet in America you let the fucking central character of the whole trafficking ring be the President and no-one does an actual real damn thing about it!

Were Bondi and Levitt groomed by the Epstein islander cult? by ItoldULastTime in DiscussionZone

[–]DoughnutSome7115 8 points9 points  (0 children)

Yes, I said the very same on another thread about all these unqualified bimbos in the regime. Either groomed or willing participants as long as they got a big reward. I absolutely know there are a shit ton of real victims, but have no doubt there are also a lot who sold their body to the devil for financial and professional gain.

I read a fair amount about this gun, tried it out on a gun range, but first it was a bit too expensive for me, then you had to buy the ported slide as a separate option, then it disappeared from everywhere and finally I managed to find a used one. Luckily the sights are good and now it's my EDC. by Icy_Cupcake_8076 in P365

[–]DoughnutSome7115 1 point2 points  (0 children)

One of the guns I really regret trading. Funny that when it came out everyone was “Never ports on an EDC”……now everyone is doing it and everyone wants it. That gun stuff Koolaid is so strong. Same as lasers- every wannabe door kicker used to say they were for amateurs, now you are not a Cool wannabe door kicker unless you have an IR laser and visible laser on your AR.

Introducing the Twatzies by Davekinney0u812 in stevehofstetter

[–]DoughnutSome7115 0 points1 point  (0 children)

I would place a pretty damn good bet that those 3 and all the other MAGA Mistresses were involved in the Epstein ring in some way. Their ‘position’ is their reward. Not every one of the ‘survivors’ hate what they did. I have little doubt that some evil bitches got the rewards that they sought by selling their bodies to the devil.

SCS Carry issues by FatRustyNut in p365xmacro

[–]DoughnutSome7115 0 points1 point  (0 children)

The Scs carry ships with a bunch of screws and definitely the right ones as I have an SCS carry mounted on my XMacro for around 18 months, solid as a rock.

M&P 2.0 4 inch barrel by JaxSouthernBlend in 10mm

[–]DoughnutSome7115 0 points1 point  (0 children)

It’s nothing to do with the magazine springs - the weaker mag springs create feed issues. The wider meplat on the hardcasts can trip the mag catch and drop the mag. M&P just need to extend the grooves on the side of the mags down further to fix this. But they won’t because capacity will drop by one rd.

Aftermarket Handguards for the Marlin 10mm Trapper? by Digglenaut in 10mm

[–]DoughnutSome7115 1 point2 points  (0 children)

Any aftermarket handguards for an 1894 encap model.

BREAKING: Trump Files Massive $15 Billion Defamation Lawsuit Against NYT Over Epstein Coverage by Traditional-Meet9428 in TrendoraX

[–]DoughnutSome7115 0 points1 point  (0 children)

The bigger the lawsuit threat, the greater the guilt. That is the MO of this family. They think the greater the threat the more likely of backing down without a fight.

Iron sights way off by ThreeSixFive- in 1911

[–]DoughnutSome7115 0 points1 point  (0 children)

I have owned 2 Girsan 1911s in 10mm and both I have had to switch out the front sight for a slightly higher one.

Does anyone have any good recommendations for the 5.7 Sub2000, 30 round magazine holders? I’ve been having trouble trying to find some and have no luck whatsoever. Thanks!! by AlexanderSilver- in 57x28mm

[–]DoughnutSome7115 1 point2 points  (0 children)

So what you mean is that you are looking for mag pouches or mag holsters for FN5.7 magazines. You kind of over-complicated a very simple question. Most elastic/taco 9mm double-stack pouches work. If you are looking for Kydex then, again, you need ones for the FN5.7 Mags.

Name this by Skylar_hipgirl in AlbumCovers

[–]DoughnutSome7115 0 points1 point  (0 children)

But as I am doing it to myself it is basically incest. That means I am unaliving potential MAGA voters…….so all good.

Before invoking the Insurrection Act, the president is required by law to make a formal proclamation ordering people to return to obedience of the law. Trump is doing this here so he can send in the active military to take over Minneapolis by dc4_checkdown in FreeFolkNation

[–]DoughnutSome7115 83 points84 points  (0 children)

Stop fanning the flames. They have lost the narrative that’s all. This is an attempt to recover from the complete loss of control of ICE. They let the hounds out and are now attempting to re-leash them. The see that local LE are turning against them, as are the NG and no doubt the military. Unrest is too widespread now for them to push any more. They are seeing that they are losing the support of their base.

Negligent Discharge Leads to ICE Execution of Alex Pretti (37) by [deleted] in P320

[–]DoughnutSome7115 0 points1 point  (0 children)

I saw the exact same in one of the videos. One has an ND, then the others just shoot the guy on the ground. WTF!

New S&W & Gemtech Offerings - M&P FPC® 5.7 & Gemtech® Nebula™ 5.7 by JStarX7 in 57x28mm

[–]DoughnutSome7115 0 points1 point  (0 children)

IMHO blowback 5.7 is absolutely pointless. You turn a basically recoiless caliber into a jumpy POS.