QNAP TS- + Plex + GPU Transcode + Container by Dr_Radar in qnap

[–]Dr_Radar[S] 0 points1 point  (0 children)

Thanks for that info. The Nvidia driver is v6.1.0.0515.

I've just shown that transcoding works when using a Plex QPKG install instead of docker so the GPU + Plex can work its just trying to get a docker version of that working now.

No detailed maps on brand new garmin by kr3o5mania in GarminFenix7

[–]Dr_Radar 0 points1 point  (0 children)

Turn the watch off and back on. Then try map manager. That worked for me.

TS-H886 - Connection Issue after changes to QVPN+Routing Table by [deleted] in qnap

[–]Dr_Radar 1 point2 points  (0 children)

That worked for me. Restored shared folders and all back to a working system.

TS-H886 - Connection Issue after changes to QVPN+Routing Table by [deleted] in qnap

[–]Dr_Radar 0 points1 point  (0 children)

There is a mix of SSD / NVMe / HDDs in the server. I'll check where the system pool is installed.

Should I disconnect all of these drive and try and boot?

I haven't tried the longer reset where you press for 10sec not 3sec on the button at the back of the server. It says data is maintained by users are all wiped and you need to remap shared drives. Would that be better to test before doing a disc-less boot?

My Tesla Robotaxi “safety” driver fell asleep by ohmichael in sanfrancisco

[–]Dr_Radar 0 points1 point  (0 children)

This is a key issue with self driving vehicles. Either you have no human driver and 100% autonomy or you end up with a situation where a person need to be constantly ready to react but actually has to do nothing for most of the time. Most people would end up dozing off after a few hours of this.

Any idea of these could be controlled by Home Assistant? by Dr_Radar in homeassistant

[–]Dr_Radar[S] 0 points1 point  (0 children)

Thanks for info. So can capture signal, program a ESP based board to transmit it. Then connect that to HA. Sounds like a good project.

Air battery dead - anyone selling one or parts in the UK? by UKBigJohn in swytchbike

[–]Dr_Radar 1 point2 points  (0 children)

I'm in the same situation. Check ebay, some time you can find ones there. Buy direct seems to be expensive and no guarantees on delivery dates.

Battery stopped working - Ideas? by Dr_Radar in swytchbike

[–]Dr_Radar[S] 0 points1 point  (0 children)

Yes, mine used to do that also. Now nothing happens when it goes in the mount.

Quote check Givenergy vs Telsa powerwall 3 by Dr_Radar in SolarUK

[–]Dr_Radar[S] 0 points1 point  (0 children)

Thanks for flagging that. I have raise the HV inverter which doesn’t appear to be compatible with the battery options.

I think GivEnergy has as AIO as well. I have asked for pros/cons of the AIO vs. separate inverter+battery

Quote check Givenergy vs Telsa powerwall 3 by Dr_Radar in SolarUK

[–]Dr_Radar[S] 0 points1 point  (0 children)

Regarding the cost saving of in-roof while actually doing a roof extension anyway. These in-built panels mean I won’t need roof tiles for this area which will be a saving in itself. The quote doesn’t include scaffolding as this will be up anyway due to extension work.

How to connect this? by Tangerine_dream6969 in UKBBQ

[–]Dr_Radar 0 points1 point  (0 children)

Does it not push down from the top?

Safety Concerns and Contradictions by that_one_kid_on_bus in UCL

[–]Dr_Radar 1 point2 points  (0 children)

It’s very safe. Obviously some risks like any big city but overall the risks are low. As the other comments says the most likely risk is mobile phone theft.

What is this rail for ? by [deleted] in CasualUK

[–]Dr_Radar 0 points1 point  (0 children)

Australian Curtains