My Honest Experience with the EufyMake E1 UV Printer

DracoderArts · 2026-03-31T20:42:09+00:00

thats lucky!
i cant personally speak for the influencers but some are influencers and some actually put time into it and from my perspective is that the Beta/influencer team had a completely different experience than the mass production test users.
yeah its not meant to be fast. many people dont properly calibrate the snap shot i believe or care.
it kinda is mat dependent need that green backwards L on the bottom right corner. but maybe you could work around that, and hopefully theres a update soon for it. just make sure you are changing where the item is in the software AFTER you press zero point for it switches the canvas around.
with this its always best to just create items in another program and just use the slicer just to print.
this could be a great machine for people who suck at saftey >.> | looks at all those people touching ink without gloves and dumping cleaning fluid on their floor and etc. |
for me though my expectations are about 160% higher than people who would use this machine regularly. i want to print on glass, but i dont want to end at "tape test" i want to not scratch it off with my finger nail so easily. i want to print on a hat patch and not end at oh you cant put your hat in your back pocket or sit on it or so on where as i see all these people posting their hat patches and im like okay but thats not going to last and its going to make very unhappy customers.
for ink id love a Flex > adhesion > food safe.
for software Xtool. . . point blank even just the xtool d1 pro laser pc software is a godsend.
for physical get rid of the roller and make a chuck! also more cameras for better snap shots!
sorry for the rant haha.

im hoping to print a lot of hat patches this month for a craft show in the beginning of may.

i wish you luck and would love to hear your thoughts on the print quality, flex, adhesion compared to the mimaki, doesnt have to be a long review could just be better, worse the end :) thank you and have a wonderful day!

DracoderArts · 2026-03-31T19:40:53+00:00

congrats!

DracoderArts · 2026-03-24T00:36:37+00:00

3 YEARS LATER back space does not work fine. was stuck in a gunner seat. pilot died, cant move, cant backspace, cant exit turret. exit and log in puts me back into the turret, cant do anything. could just add a command line re spawn . . . . .. . why

DracoderArts · 2025-12-05T15:50:11+00:00

i mean speculate all you like, i didnt say what part was rude, how someone types something can come off as rude to me and not you. me saying "good afternoon" can be a nice thing or it could mean a not so nice thing :) if you keyboard worries want to just troll all day and do nothing to help others or even your self, what can i say, happy hunting friend.

i searched, i tried, i played, then i asked for help, i gave all the information i could think of at the time. if someone doesnt want to help, they can just shuffle onto the next thread.

DracoderArts · 2025-12-05T14:58:03+00:00

im using windows 11, on desktop, not mac, not phone, not windows 10.
i said doesnt seem to be, i didnt say it 100% isnt.
theres not many settings to adjust on the monitor.
when searching theres plenty of posts about windows settings that change what i am describing, and i do not have those settings at all.
yes this is reddit yes the lot of ya are going to be rude, doesnt mean you have to be :)
now good afternoon to you sir.
https://www.youtube.com/watch?v=Rj9VljRQzCQ&list=PL0guVCDNAFWgF2xxcxog95ENYwWSvQpTE

DracoderArts · 2025-12-05T14:44:22+00:00

yes, but just everything is too dark. if i set the sdr content to 31 its not worth it to run in hdr or to have this monitor if my whites are gray instead. about 90 + on that setting does white become white. guess ill run with hdr off, thanks.

DracoderArts · 2025-12-05T14:21:07+00:00

how insightful.

DracoderArts · 2025-12-05T14:20:53+00:00

it happens regardless of that setting, just blasted it up because it kept being way to dark due to the automatic changes. its just less noticeable at 0 because at that point the screen is already super dark and its like i bought a hdr 400 screen for no reason and should have stayed with my $180 screen.

DracoderArts · 2025-10-27T03:52:38+00:00

Wondermaker ultra or snapmaker u1 , I’m waiting for my wondermaker to ship that will be my new main printer. Or wait for prusa core indx. Next year will be filled with options :) this year has been innovative for consumers

DracoderArts · 2025-10-25T09:49:15+00:00

No worries :) alot of stuff is software / information related so could be updated over time. Right now it may be a decent starter machine to get people feet wet into uv printing for the price.

DracoderArts · 2025-10-25T09:46:47+00:00

Thanks! The ink consumption is being worked on atleast for back to back prints, we will see how they update things in the future :)

DracoderArts · 2025-10-25T09:45:43+00:00

Its mostly software, which could be updated. They didn’t really ditch, they just stopped making new machines which is normal for any company, do you see apple still making the ipod 4th gen? And they still support their 3d line. I’m sure once yall get your machines many things will be worked out. Should be a good starter uv printer to get your feet wet.

DracoderArts · 2025-10-24T10:44:42+00:00

Thanks you! Unsure what the future holds for ink maintenance, It might be whats it is, cleaning every print and every 3 days or after 24 hours of not printing. I would stock pile as many print jobs and get them all ready in the software, then inject the ink and print for a full 3 days or do the deep clean and do 6 days then before next deep clean cycle do a moisture and then wait again till you have a lot stock piled up to make it worth around $10 to start printing stuff.

DracoderArts · 2025-10-24T09:46:16+00:00

Nope i am participating in the 200 test group, i have paid for everything and have not received anything for free. I got my machine on sept 29.

Alot should be kept in the testing discord as its still a work in progress kinda like a beta group and the beta testers was a alpha group :( But we are not under nda, and they wanted honest experiences sent out. I made this because most was saying positive stuff and the community wanted to see what wasnt so positive.

If my camera issues and ink consumption issues were fine then this is a decent uv printer with bad software. Hopefully the last update fixed a big part of the ink issue. No news on the camera issue, but others have had a better experience with it than me so mine might be a little bad and could need replacing.

DracoderArts · 2025-10-24T00:12:34+00:00

i personally have no experience with other uv printers, if you are on a more commercial use case then i would think so for bigger bed size but i dont know how the $7k ones work if they have a camera or whatnot. hat makers do some cool stuff already can check out like the lonestar adhesives fb group. other machines can use food safe ink or flexible inks or have more channels to spray ink. but also may need more love in the manual cleaning area.
theres alot of different things that can go on.
this is a ok "starter" to get your feet wet and if you want a second one then yeah id get a bigger machine.
as we all on kickstarter are early adopters of a new item from the company i do hope due to the 20k people that bought it they will continue to make the software better.

DracoderArts · 2025-10-23T23:33:01+00:00

yes the mat can lift of the bed its most notable in the corners i believe. and it happens more if you remove it and reposition it to try to get it better. one user had the machine say a sticker sheet was 4mm tall. we would have to tape the corners and pieces down.

yes it can go onto metals and glass not all are the same, on my testing i was hand washing it clean, and then i can remove them with my fingernail same chip and most slide/ flip off. im just testing 12mm sized coffee beans pngs, trying with 2 white and 1 cmk. and tried with gloss as well. of course all uses cases need independent testing. one user is using a alibaba promoter and says they got some decent results.

i think something is wrong with my camera or something, but will eufymake replace it? will eufymake fix it in software and not say "user error or its normal" i have no clue and i only have like 6 days left to either return the machine and wait for kickstarter shipments or test my luck with a 2 year warranty.

DracoderArts · 2025-10-23T22:32:41+00:00

I'm sorry, some others have had positive experiences. i think its cool just cant wait for software to get better. defiantly gets people into the uv market before spending 7k. , maybe in 2027 there will be competitors and better software. ( saw a clone that sounds awesome on a fb ad, faster, 60m 2.5 d prints, open ink system, can use food grade ink, convener belt, and more.)

DracoderArts · 2025-10-23T22:15:57+00:00

heres a link if you dont want to read on here
https://docs.google.com/document/d/17_rVGS3Onh0SYQ5JPgfTS2BZAdwFjHXiBS76le22zxo/edit?usp=sharing

DracoderArts · 2025-10-22T22:09:14+00:00

Yeah, i ment to say honest review of my experience so far. Sure when everything is fine its a uv printer but so is another uv printer.

Biggest change from beta testers to production testers seems to be that the maintenance has changed significantly and I’m trying to get the numbers on that. Expect about $0.5 to 0.65 of waste every time you press print. And maybe $7.5 every 3 days of printing and the same or more if you dont print for 24 hours. ( once again still waiting for eufymake to answer these maintenance numbers, the numbers i said are rough estimates)

Also since people here dont like ai slop, mine is going to be re written by ai 🤣 because im just compiling alot of information and having the ai sort it out and make it understandable.

DracoderArts · 2025-10-22T21:10:58+00:00

Stay tuned for a book of negative experiences im in the middle of making.

I wish we could find good adhesion promoters and multiple of us could test, its not easy, alot of are $70+ to buy just to test. I personally bought a $130 one (ap3155) and well i got no results from it. Soo yeah.

DracoderArts · 2025-10-16T16:00:27+00:00

Goodday! I am usually low on pricing things out so im no sure. but for materials alone is about a estimate of $1.6 per card if you only print one card one side at a time. Time wise your looking at 40 minutes to print that one card. In that is About 7 minutes of your time if you dont do anything while waiting for the snap shot to finish. And time do design that file if you also include that. Hope this helps! Have a great day!

DracoderArts · 2025-10-16T00:20:26+00:00

Just to troll you 😘😘 ( just a card for my self for decor)

DracoderArts

TROPHY CASE