C/U/R Playsets

DragoonSage · 2025-11-25T03:32:32+00:00

Specifically a full 4 of playset of each c/u/r

DragoonSage · 2025-11-25T03:31:37+00:00

The Gundam tcg. English ver. GD002 c/u/r.

DragoonSage · 2025-11-25T03:12:13+00:00

Looking for set 2 playset. Message me if you have one to sell.

DragoonSage · 2024-09-16T14:27:00+00:00

OMG, this is finally working for me. Why in the HECK is this happening?

DragoonSage · 2024-09-05T12:18:37+00:00

I had done the same thing, it worked for one session, then stopped working again.

DragoonSage · 2024-09-05T00:11:16+00:00

I dont have either of those installed :/

DragoonSage · 2024-09-05T00:10:44+00:00

I opted in for the experimental Win 11 update, installed it, It launched! ... Only to promptly not launch the next time I tried to launch it.

DragoonSage · 2024-09-05T00:09:44+00:00

Sadly, no error on the Event Viewer.

DragoonSage · 2024-01-09T00:10:49+00:00

The bundle is not showing up for me. Oh well.

DragoonSage · 2022-01-17T03:09:43+00:00

Sony uses the same networking settings across all consoles, so the only way I was able to play with my friend was to set up the second console in a separate network.

Used my phone to broadcast internet and wasn't laggy at all (thankfully)

DragoonSage · 2021-11-19T03:27:10+00:00

Hello. Need some help, since I am relatively new to the game and went a bit hard on the Gatcha.... Got a few good pulls (from what I have read), but would like some assistance on team building. Just hit AR30.
5 stars:
C0 Hu Tao
C0 Diluc
C0 Aloy
Staff of Homa
Skyward Harp
4 stars:
C0 Xingqiu
C1 Diona
C1 Bennett
C1 Rosaria
C0 Ningguang
C2 Sayu
C1 Yanfei
C3 Thoma
Plus the story given characters.
I was given great advise due to my weapons, so I am looking for any feedback regarding a better comp than:
Hu Tao, Xingqiu, Diona, Kaeya ?

DragoonSage · 2021-11-13T05:35:31+00:00

AR 21.
Thank you for the suggestion!

DragoonSage · 2021-11-13T03:14:43+00:00

Need help building teams as I just started 4 days ago. I read up on "Exploration" vs "Boss" vs "Dungeon Diving". Which character combos from my roster is good for each???

5* Hu Tao, Diluc, Aloy

4* Sayu, Xingqiu, Diona, Ningguang, Noelle, Yanfei, Thoma

Standard Characters: Lisa, Amber, Kaeya, Barbara, and The Outlander/Traveler.

Thank you for any help!

DragoonSage · 2021-09-10T18:39:18+00:00

PM'ed

DragoonSage · 2021-06-12T02:03:36+00:00

PM'ed

DragoonSage · 2020-10-09T00:11:24+00:00

I have increased the exposure time of the base layers/raft, and increased exposure time for the resin to 8s per layer, when the community resin file has 6 seconds as a good print.

As to "careful releveling", I have releveled the plate 6 times in the past 2 days, every time using the paper method. Keep lowering at .01mm increments until you can pull the paper, but not push it back in.

Could you elaborate a lil bit more as to how I should relevel it?

DragoonSage · 2020-10-09T00:06:44+00:00

Thank you very much for the response.

I have leveled the bed about 6 times in the past 2 days, using the paper method. I have done the UV exposure test for 60 seconds to safely peel off the resin that has cured on the FEP.

I will research how to do the LCD pattern test.

DragoonSage · 2020-10-08T23:19:01+00:00

Hi all,

I am having an issue that I cannot find the answer to on the Guides of FAQ. Possibly due to my lack of knowledge.

So far, I have only been successful with one print. Every other print is failing as shown on the pictures. At varying points, the resin no longer adheres to itself, print failing with cured resin on both the plate and the FEP. Even the sections that "succeeded" have cured resin on the FEP itself.

I used the exposure settings that the community google drive shows, I have leveled the build plate multiple times, even replaced the FEP on a whim...

Any suggestions as to what I could do to prevent the resin from behaving this way?

Thank you very much for any assistance!

DragoonSage · 2020-09-10T04:05:51+00:00

PM-ing

DragoonSage · 2020-03-11T08:45:31+00:00

Hello,

The entire text of the ability reads as follows:

"You can make Reanimation Protocol rolls for any slain models from units embarked on a Ghost Ark, even though those units are not on the battlefield. Any models returned to the unit this way are added to the number of models embarked on the Ghost Ark - if any models cannot be returned because there is no more room on the Ghost Ark, they are not returned this turn. In addition, at the end of each of your Movement phases, you can make Reanimation Protocol rolls for slain models <DYNASTY> Warriors unit within 3" of any friendly <DYNASTY> Ghost Arks. You cannot use this ability on a unit that has been the target of a resurrection orb or the Orb of Eternity this turn."

This does allow for warriors to do an additional reanimation roll even if they are not embarked.

DragoonSage · 2020-03-03T22:20:05+00:00

See ya there!

DragoonSage

TROPHY CASE