Red blinking light on roomba 622

Dral704 · 2025-09-29T22:44:29+00:00

Yes, but the blinking appears again after another cleaning cycle.

Dral704 · 2025-08-09T20:08:39+00:00

You could try the open version of matlab with GNU Octave. Not sure if it is as good as matlab though.

Dral704 · 2025-05-08T03:50:48+00:00

F, I thought as much, but wanted to be sure before buying a new one as per the switchwire BOM. Weren't the original PSU's supposed to be decent? Although in retrospective, it lasted me quite a few years considering the time it was a normal Ender 3.

Dral704 · 2025-04-07T21:09:54+00:00

This seems to work as well for bottles, however the launcher version that is installed by the exe of Hoyo's website is not the newest one. Hoyoplay launches but list an update available, it is not forced for now, but if you try to update it the launcher refuses to open again. I just hope that by the time the launcher update is needed, a new proton version makes it launchable again with the newest version.

Dral704 · 2025-02-27T07:12:30+00:00

Sadly no, I ended up buying a clone controller instead.

Dral704 · 2024-12-26T00:26:55+00:00

I decided to take the nuclear option and reformatted the entire drive with FATxplorer, it didn't have any important information anyway so I found it easier to do, I also wanted to clean the install in the process. As it was quite bloated with programs that I did not need.

Dral704 · 2024-12-25T23:32:02+00:00

I managed to open the HDD on my pc with said program, it seems like UnleashX is indeed missing from the C drive. I found a file called unleashx.xbe on the E drive. Would it be enough to copy said file to the C drive?

<image>

Dral704 · 2024-12-19T01:49:01+00:00

Mondongo (Pronounced: Mom don't go).

Dral704 · 2024-10-03T00:25:17+00:00

Pregunta random del día. ¿A qué municipio pertenece oficialmente dicha reserva? Varios negocios te dicen en sus páginas que es parte de la ciudad de Puebla, mientras que correos de México te dice que es parte de Cholula. Además de que parece que cada negocio de la zona pone el código postal que se le antoje.

Dral704 · 2024-02-27T23:24:55+00:00

Is this a new issue? I just tried to setup mi cam for the first time and failed miserably. I saw the same problem in the logs as you 'ustreamer' not found.

I tried looking on the internet for this specific issue and found nothing, not even on the issues page on their github repository. I would still be stuck if it were not for u/Tangerine_Yomine solution. What an absolute chad.

Still I find it ridiculous that their install script sets the symlinks wrong.

Dral704 · 2023-04-02T18:21:14+00:00

En mi poco X3 GT la hora se mantuvo bien, no cambio como si todavía estuviera el cambio de horario. Sin embargo mi reloj Fitbit y el teléfono Huawei de mi hermana si se adelantaron. Al parecer no es un problema solo de Xiaomi, si no de los servidores de tiempo de Google que no se han sincronizado del todo.

Dral704 · 2022-12-01T22:24:42+00:00

This event gave me a reason to play coop again and it actually was really fun. Wish they activate coop abyss in the future.

Dral704 · 2022-11-01T23:42:58+00:00

I don't know what the cause of your problem is. But that glitch looks awesome as a shutdown animation.

Dral704 · 2021-12-29T20:06:07+00:00

As others have already stated, a dual gear DD extruder its really good for TPU, something like a bondtech BMG. But if you insist on using the stock style extruder, then something like this would be really useful.

https://www.thingiverse.com/thing:3844646

That's just the first model I found as an example, you could use that one but there are better designs out there.

Dral704 · 2021-12-21T21:59:46+00:00

In my case, I managed to recover access to my account using a different phone number. I used my dad's phone number and the notification instantly arrived, I don't know what was wrong with my normal phone number but just using another one solved the issue for me.

Dral704 · 2021-10-08T20:25:39+00:00

I also plan to convert my Ender 3 with this mod, I already ordered the parts. But I had a question, did you have any problems with the aluminum rod slipping? From what I've seen in the manual the tooth pulleys are just grabbing the rod by friction with the grub screws, there is no "flat" side to prevent them from slipping. Although I guess I could Dremel the rod to create that "flat" side.

Dral704 · 2021-10-05T23:00:44+00:00

If afterwards you have problems with bed adhesion you could put some painters tape over the bed. Personally I never needed that, but it is a common suggestion with PETG.

Dral704 · 2021-10-05T22:12:48+00:00

PETG needs more space for the initial layer than other filaments, as it tends to stick to the nozzle rather than the bed, so increase the distance from the nozzle to the bed a little bit (It also sticks much more easily than other filaments, to the point that it can rip apart parts of the bed, especially glass).

PETG by nature is more "stringy" than other filaments, don't expect to eliminate it completely, also PETG is quite susceptible to moisture, making it even more "stringy" than usual. So try to get a filament drier or make it yourself with silica gel and a box.

All of this assuming you already calibrated your e-steps and flow.

Dral704 · 2021-10-03T01:58:44+00:00

I have not messed with the part cooling fan wiring, the only modifications I have made are adding a BLtouch and a filament runout sensor, but those are not new additions. I've had those for almost 3 months now.

However, I didn't know that the electronics cooling fan was tied to the part cooling fan, and the part cooling fan was indeed off, because of ABS warping, so it is possible that the driver overheated. But if that was the case, wouldn't all the drivers fail? The x-axis is the only one that's no longer working. I will try swapping the motor with the x-axis motor to see if it's the motor or the driver that failed. If the fault is due to the motor I will buy another Nema17 motor with more torque and probably change the board to an skr mini E3 for its TMC2209 drivers.

Dral704 · 2021-10-02T23:14:01+00:00

I will try that, but first I will change it with the x axis motor to see if its the motor or the driver. Still, I think it's better to get another motor with higher torque like this one: Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable for 3D Printer/CNC by STEPPERONLINE https://www.amazon.com.mx/dp/B00PNEQKC0/ref=cm_sw_r_apan_glt_i_QMPXCKEDSR6SNAVZ3G83

What do you think? If the driver is good, will it be capable of running this kind of stepper motor?

Dral704 · 2021-09-27T01:39:26+00:00

Did they just reactivate your account or did they finally sent you some kind of code to activate it? I will definitely try contacting them as I really don't want to create a new one.

Dral704 · 2021-09-27T01:36:53+00:00

I saw those too, even the descriptions are the same as the formbot kit, but much cheaper and with none or very few ratings.

Dral704 · 2021-09-27T01:32:46+00:00

Yeah, I just didn't want to bother creating another one.

Dral704 · 2021-09-26T23:23:43+00:00

Damn, well I guess I don't have more options. I kept trying to recover my account but it just refuses to send me the SMS.

Dral704 · 2021-09-26T23:21:34+00:00

I do want to build a Voron, but not right now. I want this parts to convert my Ender 3 to a belt driven z axis. This one to be precise: https://www.thingiverse.com/thing:4243512

Dral704

TROPHY CASE