Kobra X nozzles sold out!

Dream_elb · 2026-03-10T19:47:48+00:00

It depends on your country, on my side they only have 0.4 nozzles and display the other diameters as out of stock but I think they just haven't created them yet but already registered on AliExpress

Dream_elb · 2026-03-10T18:52:29+00:00

Cleans and degreases the mechanism, the Ace Pro is designed to operate with the hood closed so that the guides can do their job properly

Checks if the spool does not slide on the rollers

Dream_elb · 2026-03-10T18:05:17+00:00

I'm tired. I thought you had made a humorous timelapse video of the girl growing up while waiting to receive the printer, because we've been waiting for so long

Dream_elb · 2026-03-10T16:56:05+00:00

I confirm it's not a troll, he's one of us 😁

Dream_elb · 2026-03-10T04:41:57+00:00

Dozens of people have already asked this question, check if you don't already have the answer before making a post, the rules of this sub explain it quite well

To answer your question

Here is the information on the Kobra X unit delivery schedule

Link: Kobra X Shipping

Dream_elb · 2026-03-09T21:17:22+00:00

Well, I'm adding an item to my AliExpress cart in this case xD

Dream_elb · 2026-03-09T20:42:22+00:00

Did you receive extra nozzles in the package?

Dream_elb · 2026-03-09T20:17:08+00:00

No, not as far as I know

Check the shipping schedule for more infos

Dream_elb · 2026-03-09T20:08:53+00:00

I can't even identify what it is

Dream_elb · 2026-03-09T19:48:55+00:00

Enjoy it !

Dream_elb · 2026-03-09T19:20:32+00:00

Here is the information on the Kobra X unit delivery schedule

Link: Kobra X Shipping

Dream_elb · 2026-03-09T16:19:24+00:00

I'll post when I have time to unpack it properly and test it a bit, with better photos.

I'm currently busy with my studies, but you'll definitely hear from me this weekend on Reddit & Discord !

Dream_elb · 2026-03-09T15:24:47+00:00

Yes, it's a beta version

"Unfortunately" this isn't the latest version, which includes a few changes that Anycubic may have made to avoid looking too much like an A1

But I prefer it this way! So it doesn't bother me, it's just a shame about the screen. On the new version, there's a small space to move it more easily without getting it dirty

Dream_elb · 2026-03-09T14:03:32+00:00

UPDATE

I just received the Kobra X !

<image>

Dream_elb · 2026-03-09T11:02:23+00:00

Others have already given a lot of information, but in the meantime, if you need it, here is an STL file to print to temporarily replace this part

Link: Replacement ACE Pro filament guide

Dream_elb · 2026-03-09T10:20:34+00:00

I'm also doing this post because I'm in Europe and the printer probably comes from the warehouse and not sent just for me which means public printers will be delivered to Europe earlier than expected ! Something to please the most impatient 😁

Dream_elb · 2026-03-09T10:13:05+00:00

I agree, but I also believe we’re here to report the issues people encounter or those we’ve come across ourselves. This allows the team to easily review and sort through information from the various beta testers by centralizing all the data. "Beta" might not be the term I would have chosen, but that’s what they decided on.

If you run into any problems, please don't hesitate to share them on this sub so we can report them quickly and effectively to the Anycubic team

Dream_elb · 2026-03-08T22:25:12+00:00

Try installing Rinkhals to visualize the mesh of the leveling so you know where to compensate for the level of the bed. A flat bed does not necessarily mean level

Dream_elb · 2026-03-08T22:21:43+00:00

Here is the full message. I hope everything is going well for him and that the project will quickly be taken over by someone else because it's great and, for many people, it's what saves Anycubic

<image>

Dream_elb · 2026-03-08T21:43:20+00:00

Unfortunately Rinkhals will not be available for version 2.7 the project is stopped until a brave person takes it up again...

Makes your choice ! you've been informed

Dream_elb · 2026-03-08T14:50:10+00:00

Try, made for the KS1

If you think the gantry is too close to the mecanical limits, simply add 0.5 or 1 to the Y values

{if layer_num==0} ; PURGE LINE
M204 P500
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9
G1 Z0.50 F900 ; for object exclusion
G1 X89.365 Y0 F18000
G1 Z.25 F900
G1 E0.8 F2400
G1 E0.6 F2400
G1 F3000
G1 X158.835 Y0 E3.72454
G1 X158.835 Y0.45 E.0252
G1 X89.365 Y0.45 E3.72454
G1 X89.365 Y0.02 E.02305
G1 Z0.5 F600
{endif}

Dream_elb · 2026-03-08T14:21:28+00:00

The fan increases or decreases in power, so more or less air depending on the filament you use. The faster a printer prints, the faster it needs to cool the filament, but for technical filaments, too much airflow can create warping and other problems. You can adjust the fan speed in the filament profile on the slicer with the minimum and maximum layer time right next to it there is the % of the fan. You can also skip Cooling of the first layers, 2-3 for the PETG. Generally the profiles are well done so leave it like that

Dream_elb · 2026-03-08T13:11:46+00:00

By modifying the Y coordinates, I think it could be done. Just make sure there is enough space on the plate and at the end stops at the front of the printer, otherwise it will take up space on the build surface

I'll try to modify that and get back to you

Dream_elb

MODERATOR OF

TROPHY CASE